Varytec LED Spot 3 Manuale utente
User manual
LED Spot 3
2 / 6
Table of contents
1.
Safety instructions............................................................................................................................ 3
1.1.
FOR SAFE AND EFFICIENT OPERATION............................................................................ 3
2.
Features ........................................................................................................................................... 4
2.1.
Powerconnection..................................................................................................................... 4
3.
Working Modes ................................................................................................................................ 4
3.1.
Music control mode ................................................................................................................. 4
3.2.
Master Slave mode.................................................................................................................. 4
3.3.
4-Light show (in Master Slave Mode)......................................................................................4
3.3.1.
The slave items follow the first slave item:......................................................................5
3.3.2.
The slave items follow the master item........................................................................... 5
3.4.
DMX Mode............................................................................................................................... 5
4.
DMX Table ....................................................................................................................................... 5
5.
Technical data.................................................................................................................................. 6
3 / 6
1. Safety instructions
•This device is suitable for indoor use only.
•All modifications to the device will void the warranty.
•Repairs are to carry out by skilled personnel only.
•Use only fuses of the same type and original parts as spare parts.
•Protect the unit from rain and humidity to avoid fire and electric shocks.
•Make sure to unplug the power supply before opening the housing.
1.1.FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and extreme temperature
Avoid exposing it to direct rays of the sun or near a heating appliance.
Not put it in a temperature bellow 32°F /0°C, or ex ceeding 104°F /40°C.
Keep away from humidity, water and dust
Do not place the set in a location with high humidity or lots of dust.
Containers with water should not be placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
To avoid placing on un-stable location
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing,
do not open the cabinet by yourself, it might result a danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure
to hold the plug. When not using the device for an extended period of time, be sure to
disconnect the plug from the receptacle
.
4 / 6
Important: Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or
problems. Make sure the electrical connection is carried out by qualified
personnel. All electrical and mechanical connections have to be carried out
according to the European safety standards.
2. Features
- Multicolour
- Electronic dimming device 0 – 100%
- Built in microphone
- DMX 512 Protocol
- 3 or 5 DMX Channels
- Master Slave Mode
2.1.Powerconnection
Before connecting this item to the mains make sure that the local power connection is fitting to this
LED Spot 3! The LED Spot 3 needs 100V ~ 230V AC.
3. Working Modes
3.1.Music control mode
In this mode the LED Spot 3 react to music and plays the different colors.
1. Power on the item and set the Dip switch #10 to ON
2. Now the item changes the color according to the music.
3.2.Master Slave mode
With this function you can connect up to 16 fixtures and use them without a controller. The items work
in a music control mode. In this mode one item works as control unit and the ithers reacting according
to it and its preprogrammed programs. Each item can be defined to be a master or a slave.
1. Daisy chain the items with DMX Cables using the backside XLR Connectors.note that the
male connector is the IN and the female connector is the out at the item. The first item in the
row uses the female connector only and the last item in line should use the male connector
only. If the cable are longer then you should use a terminator at the end of the line.
2. At the master item you should set up the dip switches 1-9 to OFF
3. At the slave unit please set all dip switches to ON
4. Now the slave items follow the master and its programs.
3.3.4-Light show (in Master Slave Mode)
With this function you can set up a 4-light show from the master or from a slave item. Please do
step 1 from setting up a master slave mode and then go a s described here:
5 / 6
3.3.1. The slave items follow the first slave item:
1. Set up the dipswitches to OFF at the Master item.
2. At the slave item please set up all dipswitches excepting #10 to ON. The dipswitch #10
has to stay in OFF mode.
3. Now all items follow the firts slave item and the master not.
3.3.2. The slave items follow the master item
1. At the master please set up all dipswitches to OFF
2. At the slave item please set up the dipswitches excepting #10 to ON. The dipswitch#10
should stay in OFF mode.
3. Now all the items follow the master.
3.4.DMX Mode
You can use this item as 3 or 5 channel dmx item.If you use a dmx controller you are able to
create own programs.
1. With this mode you can use every function of the item by using a dmx controller.
2. To choose the 3 channel mode please set up the dipswitch #10 to ON. If you prefer the 5
channel mode please set up the dipswitch #10 to OFF.
3. Set up the desired dmx address with the dipswitches 1-9 according to the binary system.
4. Now you can connect and control the item by every standard dmx controller.
4. DMX Table
DMX-WER
3-Channal Table
C
hannel
Value
Fun
c
tion
1 0 – 255 Red Dimming 0 – 100%
2 0 – 255 Green Dimming 0 – 100%
3 0 – 255 Blue Dimming 0 – 100%
5-Channal Table
Kanal
Wert
Funktion
1 0 – 255 Red Dimming 0 – 100%
2 0 – 255 Green Dimming 0 – 100%
3 0 – 255 Blue Dimming 0 – 100%
4 0 – 15
16 – 255
Strobe open
slow to fast
5 0 – 255 Master Dimmer 0 – 100%
6 / 6
5. Technical data
Voltage AC 120 – 230V 50~60Hz
Power consumption 9W max
Light source LED 3W 3in1 RGB
Angle 12°
Measures 198 x 127 x 19mm
Weight 1,2kg
control DMX, Master Slave, Automatik
Importer:
B & K Braun GmbH
Industriestraße 1
D-76307 Karlsbad
www.bkbraun.com
info@bkbraun.com
Indice
Altri manuali Varytec Attrezzatura di illuminazione
Varytec
Varytec LED Ball RGBW 50cm 4x8W DMX Manuale utente
Varytec
Varytec Street Bar IP65 16x3W TW Manuale utente
Varytec
Varytec BAT.PAR 8 RGBW Manuale utente
Varytec
Varytec VR-260 Manuale utente
Varytec
Varytec Hero Wash 300 FC Manuale utente
Varytec
Varytec PAR 56 short Manuale utente
Varytec
Varytec LED PAD 147 Manuale utente
Varytec
Varytec Hero Mirror Moving Head Manuale utente
Varytec
Varytec LED Laser 4 Manuale utente
Varytec
Varytec LED Flat Par 5x4 W RGBW 4in1 Manuale utente
Varytec
Varytec Mini LED Strobe Manuale utente
Varytec
Varytec LED Giga Bar 4 Manuale utente
Varytec
Varytec GLC-1 Manuale utente
Varytec
Varytec Hell Ball I Manuale utente
Varytec
Varytec Easy Move XS HP Wash Manuale utente
Varytec
Varytec Laser Moonstar MK II Manuale utente
Varytec
Varytec VP-m5 Manuale utente
Varytec
Varytec Lighting equipment Manuale utente
Varytec
Varytec RGBW IP65 Manuale utente
Varytec
Varytec LED Derby ST Manuale utente
