Vega Absolute Smart-MS0101 Manuale utente

www.vega-absolute.ru

MOTION SENSOR

SMART-MS0101

User Manual

Infrared motion sensor Vega Smart-MS0101 is designed

to detect penetration into the protected area. The

sensor alternately operates in two modes: «Guard» and

«Neutral». Sends an alarm signal to the LoRaWAN™

network by the triggering.

Smart-MS0101 / User Manual

Revision №07 - 03 October 2019

Document Information

Title

Motion sensor Smart-MS0101

Document type

Manual –Translation from Russian

Document number

V05-MS0101-01

Revision and date

08 –03 October 2019

This document applies to the following products:

Product name

Type number

Vega Smart

Vega Smart-MS0101

Revision History

Revision

Date

Name

Comments

08.12.2017

KEV

Document creation date

08.08.2018

KEV

Technical characteristics are added, new part is added

28.09.2018

KEV

Typo at the communication protocol was fixed

22.01.2019

KEV

Communication protocol changed, setting via ‘air’

described.

Frequency plans added, specification changed, warranty

changed, configurator updated.

“Marking” part added, “Indication” part changed

24.01.2019

KEV

Inaccuracy in communication protocol fixed –packet

type for packets with settings and request of settings

17.06.2019

KEV

Inaccuracy in the table of settings fixed –setting 43 is 1-

byte size

15.08.2019

KEV

Added new functionality’s description, it’s a sending

message when the device arming

03.10.2019

KEV

Fixed an error in the device arming setting, p.27

Smart-MS0101 / User Manual 
 
3
Revision №07 - 03 October 2019 
 
CONTENTS 
INTRODUCTION.........................................................................................................................................................................4 
1 DESCRIPTION AND OPERATION .........................................................................................................................................5 
Device description .................................................................................................................................................................5 
Comunication and data collection algorithm ..................................................................................................................6 
Functional ................................................................................................................................................................................6 
Marking.....................................................................................................................................................................................6 
2 SPECIFICATION .......................................................................................................................................................................8 
3 OPERATION..............................................................................................................................................................................9 
Indication .................................................................................................................................................................................9 
Initial startup..........................................................................................................................................................................10 
Sensor mounting recommendations ...............................................................................................................................12 
Connecting via USB .............................................................................................................................................................13 
4 VEGA LORAWAN CONFIGURATOR...................................................................................................................................15 
Interface of the application ................................................................................................................................................15 
Connection to the device...................................................................................................................................................16 
“Device info” tab ...................................................................................................................................................................17 
“LoRaWAN settings” tab ......................................................................................................................................................19 
“Smart-MS0101” tab.............................................................................................................................................................23 
5 COMMUNICATION PROTOCOL ........................................................................................................................................24 
SMART-MS0101 transmits the following types of packets ..........................................................................................24 
SMART-MS0101 transmits the following types of packets ..........................................................................................26 
6 STORAGE AND TRANSPORTATION REQUIREMENTS ...................................................................................................28 
7 CONTENT OF THE PACKAGE .............................................................................................................................................29 
8 WARRANTY.............................................................................................................................................................................30 
 
 
 
 
 

Smart-MS0101 / User Manual

Revision №07 - 03 October 2019

INTRODUCTION

This manual is designated for Vega Smart-MS0101 motion sensor (hereinafter –device,

sensor) manufactured by Vega-Absolute LLC and provides information on powering and

activation procedure, control commands and functions of the device.

This manual is targeted at specialists familiar with installation work fundamentals for

electronic and electrical equipment.

To provide the stable radio between the gateway and the end device it

is recommend avoiding the device installation in the places which are

barriers for the radio signal getting through like a reinforced floors and

walls, a basement, an underground facilities and wells, a metal case

etc.

The necessary stage for the network deploying including a big quantity

of end devices is a radio planning work with nature experiments

Smart-MS0101 / User Manual

Revision №07 - 03 October 2019

1 DESCRIPTION AND OPERATION

DEVICE DESCRIPTION

Infrared motion sensor Vega Smart-MS0101 is designed to detect penetration into the

protected area.

The sensor alternately operates in two modes: «Guard» and «Neutral». In the «Guard»

mode, the device sends an alarm message to the LoRaWAN™ network when motion is

detected, after which it switches to the «Neutral» mode for a while. In the «Neutral» mode,

the sensor does not send alarm messages when motion is detected.

If the movement in the protected area has ceased, then the device switches back to the

«Guard» mode after a certain configurable period. There is an option of message sending

when the device switched to the “Guard” mode (configurable through the «Vega LoRaWAN

Configurator»)

The device arming time interval is setting up by the «Vega LoRaWAN Configurator»

application and may vary from 1 to 60 minutes.

Vega Smart-MS0101 can be used to protect premises, buildings and structures, as well

as in Smart Home systems, built on LoRaWAN™ technology.

The sensor is powered by a CR123A 1400 mAh replaceable battery.

The adjustable data transfer period can be from 5 minutes to 24 hours. Data

transferring in random point in time during set period.

The internal clock is set automatically when device connected to the "Vega LoRaWAN

Configurator" via USB.

Smart-MS0101 / User Manual

Revision №07 - 03 October 2019

COMUNICATION AND DATA COLLECTION ALGORITHM

The device forming a data packet with a configurable period from 5 minutes to 24

hours. The data saving in device memory and transmitting during the next communication

session with the LoRaWAN network.

If there is no alarm mode, then data transferring in random point in time during set

period. At the next communication session, the device starts sending accumulated packets

with readings, from the earliest to the latest.

When alarm situation appears, the device forming alarm packet and transferring it

immediately.

With the "Confirmed uplinks" option turned on, the device will send the next packet

only after receiving a confirmation of the delivery of the previous one. If such confirmation

has not received after the fulfilled in the settings uplink number of transmissions, device

completes the communication session until the next one according to the schedule. In this

case, the device continues to form packets according to the communication period and store

it in memory. Non-transmitted packets remain in the device memory until the next

communication session.

With the "Confirmed uplinks" option turned off, the device just sends all accumulated

packets to the network in order from the earliest to the latest. There are no checks of package

delivery in this mode. There are no non-transmitted messages in the device memory.

The internal clock is set automatically when device connected to the "Vega LoRaWAN

Configurator" via USB, also adjustable via LoRaWAN.

FUNCTIONAL

Vega Smart-MS0101 motion sensor is class A device (LoRaWAN™ classification) and

has the following features:

oADR support (Adaptive Data Rate)

oSending of confirmed packets (configurable)

oExtra communication in case of alarm event

oMessage sending when the device arming

oTwo working modes “Neutral” and “Guard”

oTemperature measurement by the internal temperature sensor

oBattery charge measurment (%)

oSensitivity: up to -138dBm

MARKING

Device marked with sticker that contain the next information:

oDevice model;

Smart-MS0101 / User Manual

Revision №07 - 03 October 2019

oDevEUI;

oMonth and year of manufacture;

oQR-code containing DevEUI for automatized count.

Sticker located in three places –on device case, in factory certificate and on the packing

box.

Besides, there is an additional sticker located on the packing box and contains:

oInformation about firmware version;

oQR-code containing DevEUI and keys for device registration in network via OTAA

method.

Smart-MS0101 / User Manual

Revision №07 - 03 October 2019

2 SPECIFICATION

Main

USB-port

mini-USB, type B

Operating temperatures

-40…+70 °С

Maximum detection range

not less than 15 m

Range of velocities of the intruder

0.3…3 m/s

Sensor mounting height

2.1 m

Angle of the sensor in the vertical plane

6°

Resistance to external light

6500 lux

Built-in temperature sensor

yes

LoRaWAN™

AppEui by default

766567616D733031

LoRaWAN™ class

Quantity of LoRa channels

Frequency plan

RU868, EU868, IN865, AS923, AU915,

KR920, US915, KZ865, custom (EU868

based)

Activation type

ABP or OTAA

Communication period

5, 15, 30 minutes, 1, 6, 12 or 24 hours

Memory amount for storing packets

200 packets

Antenna

internal

Sensitivity

-138 dBm

Radio coverage in restrained urban conditions

max 5 km

Radio coverage within line of sight

max 15 km

Transmitter power by default

25 mW (configurable)

Maximum transmitter power

100 mW

Power

Replaceable battery

CR123A 3V, 1400 mAh

Warranty number of packets sent by the device,

not less

15 000

Case

Housing dimensions

35 х 50 х 70 mm

Ingress protection rating

IP41

Smart-MS0101 / User Manual

Revision №07 - 03 October 2019

3 OPERATION

INDICATION

A double color indicator is located on the front of the sensor case and it flashes red when

detect motion in the protected area.

One more indicator is located on the board and it shown only when cover off and

displays a linking to the network state.

Indicator on the

front of the device

case

Indicator on the

device case

Indicator on the

board

Smart-MS0101 / User Manual

Revision №07 - 03 October 2019

LED signal

Meaning

Series of short flashings

Linking to the network

One long flashing

The device connected to the network

and is in active mode

Three long flashings

Linking to the network is unsuccessful

or the device switched to the

«Storage»mode

In case of connection attempt fail, the device will continue to accumulate

data and will attempt to connect to the network every 6 hours

INITIAL STARTUP

Motion sensor is powered by the CR123A 3V 1400 mAh replaceable battery. You need

to insert the battery observing the polarity before start.

The sensor supports two activation methods in the LoRaWAN™ network - ABP and

OTAA. Select one of the methods using “Vega LoRaWAN Configurator” application (See part 4).

1. ABP. After pressing the start button, the device immediately starts working in the

"Active" mode.

Place the CR123A

battery in the

battery

compartment

Altri manuali per Smart-MS0101

Indice

Altri manuali Vega Absolute Sensore di sicurezza

Vega Absolute

Vega Absolute Smart-MS0101 Manuale utente

Manuali Sensore di sicurezza popolari di altre marche

THORLABS

THORLABS PDA10JT Manuale utente

Waeco

Waeco UV-DETECT Manuale utente

Intermatic

Intermatic IOS-DSIMF Manuale utente

urmet domus

urmet domus 1083 Manuale utente

Siemens

Siemens AZL66 Series Manuale utente

BTI

BTI Profiline Multi Finder Manuale utente

Challenger

Challenger SL01 Manuale utente

DMP Electronics

DMP Electronics 1122INT Manuale utente

Rielta

Rielta Ladoga MK-RK Manuale utente

Mirion Technologies

Mirion Technologies ACCURAD PRD Manuale utente

Bosch

Bosch DS835 Manuale utente

DBI SALA

DBI SALA EZ Stop Manuale dell'operatore

Lamptime

Lamptime ST05C Manuale utente

Ubiquiti

Ubiquiti MFI-MSC Manuale utente

Subsite

Subsite 910R Istruzioni per l'installazione

Satel

Satel OPAL Pro Manuale utente

Aleph

Aleph XC-1XTEU Manuale utente

Pima

Pima LARIS QUAD Manuale utente