VEIKOUS PG0202-03 Manuale utente
Wood Pergola
Scan for Installation Video
Instruction Manual
STOP
MISSING A PART?
CALL US BEFORE GOING
BACK TO THE STORE
The store where you made your purchase
Does not stock parts for this item.
If you have assembly questions or you are missing or
have damaged parts,please call
The store where you made your purchase
Does not stock parts for this item.
If you have assembly questions or you are missing or
have damaged parts,please call
The store where you made your purchase
Does not stock parts for this item.
If you have assembly questions or you are missing or
have damaged parts,please call
Please prefer email contact. Due to busy lines,
there may be a wait for calls to be answered.
1-858-324-1911
(Mon - Fri, 10:00 am to 7:00 pm EST)
you can also e-mail [email protected]
or visit www.veikous.com
Please have the following information ready when you make your call:
Read entire assembly manual,paying special attention to the important tips and safety information .
Ensure there are no missing pieces by first separating and identifying all parts.
Make sure to check packing material for small parts that may have fallen out during shipment.
Structures are not intended for public use.The Company does not warranty any of its residential
structures subjected to commercial use such as:Daycare,Preschool,Nursery School,Recreational
Park,or any similar Commercial Application.
This manual contains helpful information concerning assembly preparation,installation procedure
and required maintenance.
Always keep safety in mind as your structure is being built.
Keep these instructions for future reference.
Model Number of the product located on the frond of the assembly manual
Description of the part from the parts list
22
16
Parts Identification
01 x4
10 x8 x9
09 x8
08 x8
13 x4
x4
05 x14
06 x2
07 x2
02
04
03
x16
11 x2
12 x4
REPEAT 4 TIMES
STEP1-1
J
JG01
G
01
---------
---------
---------
---------
---------
---------
50MM
x4 x8 x24
---------
---------
---------
<1>
Place an L-shaped Bracket (J) at the bottom of the Post ( ), noting that the top and bottom of the Post
are different. Place the L-shaped Bracket (J) flush at the bottom, and then fasten it to the Post
with three Screws (G) through the pre-drilled holes.Turn the Post around.
Install the second Bracket on the Post as shown. (Two L-Brackets per Post).
01
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
STEP1-2
JG
01 x4 x8 x24
lnstall the rest six Brackets(J) on the other three Posts( )as shown.
#Totally four Posts( ), eight L-shaped Bracket (J) and twenty-four Screws(G).
<2>
01
01
REPEAT 2TIMES
STEP2
07 12
06 x2 x2 11 x2 x4 Bx40
Connect the two long Header Boards( & ) and three short Header
Boards(one and two ) together with twenty Screws(B) as shown.
<3>
11 12
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
06
07
B
12
12
11
06 07
STEP3
A
Bx12 x16 13 x4
<4>
Keep the assembled Header at an angle of 90 and push it against the Post.
Fasten it to the Post with sixteen Screws(A) and twelve Screws(B) through all pre-drilled holes.
(Four Screws(A) and three Screws(B) per Post.)
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
---------
A
---------
---------
---------
B
13
Indice
Altri manuali VEIKOUS Tenda
