Veilux VB-11IRC68L2810-HD Manuale utente

FULL HD MEGA PIXEL CAMERA

FULL HD

MEGA PIXEL

IR BULLET CAMERA

USER’S MANUAL

■ 1/3" Panasonic CMOS sensor

■ Full HD Resolution

■ DAY & NIGHT

■ WDR (Wide Dynamic Range)

■ DNR (Digital Noise Reduction, 2D+3D)

■ Privacy mask Function

■ On Screen Display

■ Intelligent motion detection

■ HD-SDI/CVBS Output

■ Multi Protocol(Pelco-D, Pelco-P)

HD 003

The Art of Surveillance

Precaution

Components

Do not install the camera in extreme temperature conditions .

To avoid malfunctions, never use the camera close to a gas

or oil leak

Do not Keep the camera face tostrong light directly

Do not disassemble the camera even if troubles happened

Do not drop the camera or subject them to physical shocks.

Do not install the camera under unstable lighting conditions

Do not install or use the camera in an environment where the

humidity is high

Do not expose the camera to rain or spill beverage on it.

WDR / 3D DNR

IR BULLET CAMERA

USER’S MANUAL

WDR/3D DNR IR BULLET CAMERA

WDR/3DDNR

ZeroDefect

HighResolution of 600 TV Lines

SensUp(x512, DSS)

DIS(DigitalImage Stabilization)

PolygonalPrivacy Masking

D.Zoom(x1~x10)

Eclipse

HighSensitivity Day&Night

Option

RS-485

Terminal Block

SCREW

MANUAL

L-WRENCH

SERVICE VIDEO

SUN SHIELD

1. Features

• 1/3" Panasonic CMOS sensor

2,227,080pixels(Total) / 2,122,848pixels(Active)

• Full HD Resolution

1920x1080p / 30fps

1280x720p / 60fps

• DAY & NIGHT

This camera supports lter changed day and night function using DC Motor

controller. It can be changeable OLPF day to night depending on the luminance

level using DC Motor. It can be also controlled by external Day and Night port.

• WDR (Wide Dynamic Range)

WDR, more eectively than previous models,

by applying an optimum fusion ratio when combining the high speed

shutter used in bright areas and the low speed shutter used in dark areas.

• DNR (Digital Noise Reduction, 2D+3D)

The DNR technology eliminates noise thus generating a distinct and clear

image. This camera DNR function utilizes both an adaptive 2D lter

reducing noise in the brightness of the image and an adaptive 3D lter

reducing noise caused by movement.

• Privacy mask Function

The privacy zone function makes it possible to make specic areas of the

scene from view.

• On Screen Display

This camera supports the OSD function. And so, the camera can be controlled

by selecting text displayed on the monitor screen.

• Intelligent motion detection

You can transmits an alert signal when it detects motion of an object on

the screen. This feature is useful when you have to monitor several screens

simultaneously.

• Output

Digital output : HD-SDI

Analog output : NTSC, PAL Composite (without WDR)

• Protocol

This camera supports the multi-protocol (Pelco-D, Pelco-P)

2. Names and Functions of Parts

③

②

①

④

⑤

⑥

① IR LEDs

② Focus Handle

Used to provide for accurate of an object within the

lens field of view

③ Zoom Handle

Used to adjust zoom magnification by turning

④ OSD Board

⑤ Sun-Shield

⑥ Bracket

Service Video

DOWN

RIGHT

ENTER

LEFT

Monitor

Adaptor

HD-SDI Cable

AC24V + (RED)

AC24V - (BLACK)

AC Power Connecting

DVR

RS485 +

(Option)

RS485 -

PORT2

RX TX RX

PORT1

3. Installation & Connection

4. How to Set up the Function

MODEL IR CDS

EXPOSURE

WHITE BAL

IMAGE

INTELLIGENCE

SPECIAL FUNC

DISPLAY

EXIT

MODEL IR CDS

EXPOSURE

WHITE BAL

IMAGE

INTELLIGENCE

SPECIAL FUNC

DISPLAY

EXIT

Main Menu

MODEL

Functions can be set-up using the Menu Key of pelco protocol.

The menu consists of the “Main Menu” and “Sub Menu”.

The main menu is displayed where 6 camera functions can be selected.

The sub menu is displayed at the push of each main menu selection.

select model : IR CDS

-> Switches day and Night using an external CDS Sensor

EXPOSURE

BRIGHTNESS 10

LENS DC

SHUT SPEED AUTO

FLICKERLESS OFF

DSS OFF

AGC ON

WDR/BLC

DAY&NIGHT

SMART IR OFF

RETURN

MODEL IR CDS

EXPOSURE

WHITE BAL

IMAGE

INTELLIGENCE

SPECIAL FUNC

DISPLAY

EXIT

EXPOSURE

1. BRIGHTNESS : Adjust brightness level

- 0(dark) ~ 20(bright) steps

2. LENS : Select LENS type(DC / MANUAL)

MODE : In case of the indoor, will be recommended the INDOOR MODE

In case of the outdoor, will be recommended the OUTDOOR MODE

*If Shutter rolling occurs, the MODE should be changed from

OUTDOOR to INDOOR

3. SHUTTER SPEED : Can be set to AUTO or MANUAL(PAL(NTSC))

AUTO / 1/25(30),1/50(60),1/100(120),1/240,

1/500,1/1000,1/2000,1/4000,1/8000, 1/16,000,

1/30000, 1/60000 sec.

4. FLICKERLESS : Select ON or OFF

5. DSS : Select maximum DSS(Digital Slow Shutter)

-OFF / x2, x3, x4

6. AGC : SELECT ON/OFF

Select ON : Auto gain control(0~20 steps)

WDR/BLC : Select WDR(Wide Dynamic Range) or BLC(Back Light Compensation)

- WDR

WEIGHT :Represent the exposure of the shutter.The higher value,

the brighter part looks well but the dark part relatively seems to

darken (0 ~ 3)

- BLC

AREA : According to illumination of WINDOW, BLC controls.



① IR LEDs

② Focus Handle

Used to provide for accurate of an object within the

lens field of view

③ Zoom Handle

Used to adjust zoom magnification by turning

④ OSD Board

⑤ Sun-Shield

⑥ Bracket

POS-X : Adjust the window X-Axis position

POS-Y : Adjust the window Y-Axis position

SIZ-X : Adjust the window X-Axis size

SIZ-Y : Adjust the window Y-Axis size

* ACE and DEFOG should be off while WDR mode is on.

8. DY&NIGHT : Select Day&Night

1) D&N

-AUTO / DAY / NIGHT / EXT

Delay : 0 ~ 255 seconds

BURST : OFF / ON

THRS : (LOW / MIDDLE / HIGH)

According to daytime, nighttime setting the levels of transition

sets to no changes when it is dark at, higher the step it is set to

GAP : LOW / MIDDLE / HIGH

This setting adjusts the margin of change from the setting

of light to dark /daytime to nighttime and dark to light / nighttime

to daytime. If this setting is too low then fluctuation may occur.

2) IR CDS Model

 -AUTO / DAY / NIGHT

 Delay : ---

 BURST : OFF / ON

 THRS : ---

 GAP : ---

MODEL IR CDS

EXPOSURE

WHITE BAL

IMAGE

INTELLIGENCE

SPECIAL FUNC

DISPLAY

EXIT

WHITE BAL

AWB AUTO

CHROMA 10

RETURN

1. AWB : Select WHITE BALANCE mode

-AUTO / ONE PUSH / MANUAL /INDOOR / OUTDOOR

AUTO : Automatically adjusts color according tothe available lighting.

ONE PUSH : It is a fixed whitebalance mode that may be automatically

readjusted only bypressing ONE PUSH

MANUAL : Color can be corrected when the user increases or decreases

“Red Gain” or “Blue Gain”.

RED GAIN : Adjust Rgain value 0 ~ 20

BLUE GAIN : Adjust B gain value 0 ~ 20

INDOOR : Set color temperatureto be Indoor light (3700°K)

OUTDOOR : Set color temperatureto be Outdoor light (5100°K)



2. CHROMA : Adjust CHROMA gain value

-0 ~ 20 steps

WHITE BALANCE



1. SHARPNESS : Adjust sharpness level(0 ~ 10 steps)

2. MIRROR : Select a flip mode

-OFF / H / V / H&V

H : You can flip thepicturehorizontally on the screen

V : You can flip thepicture vertically on the screen

H&V : You can flip thepicturehorizontally & vertically on the screen

3. Freeze : Select real or still mode(OFF / ON)

4. E.ZOOM : Select maximum digital zoom magnification.

-x1 ~ x12, x14, x15, x18, x21, x25, x32

5. HLC : Select High Light Compensation

When extremely bright light isprojected tothe camera masking is

used on theportion toprevent partial saturation on themonitor.

-OFF / ON

ON LEVEL : 0 ~ 20 steps

COLOR : Black, White, Yellow, Cyan, Green, Magenta, Red, Blue

6. ACE : Select Digital WDR(WideDynamic Range)

-OFF / ON

*When ACE is ON, WDR and DEFOG function can not turn on

7. DNR: Select Digital Noise Reduction

-AUTO / OFF / LOW / MIDDLE / HIGH

8. D.COMPRESS : Video image data compression function.

Please use this function only IP camera.

-OFF / ON

IMAGE

MODEL IR CDS

EXPOSURE

WHITE BAL

IMAGE

INTELLIGENCE

SPECIAL FUNC

DISPLAY

EXIT

IMAGE

SHARPNESS 6

MIRROR OFF

FREEZE OFF

E.ZOOM X1

HLC OFF

ACE OFF

DNR AUTO

D.COMPRESS OFF

RETURN

Indice

Altri manuali Veilux Telecamera di sicurezza

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente