Velleman VMB1TC Manuale utente

MULTIROOM TEMPERATURE CONTROLLER SYSTEM



Up to 32 sensors per controller



Up to 7 zones



Up to 31 progra instructions can be saved per sensor or zone



Progra types

 day programs

 working day programs

 weekend programs

 week programs



Power supply: 12VDC ... 18VDC/50 A

VMB1TC

VMB1TS

There are several manuals available for

this temperature control system:

1. Getting started anual, This guide can be

found in the sensor package, and provides

an overview of the syste . Read this first!

2. This anual, use it together with the getting

started anual for standard syste set-up.

3. An extended anual is available for

download. Use this anual for special fea-

tures and to study exa ples.

4. A controller enu overview sheet is also

available for download, used as reference.

IMPORTANT: VMB1TS and VMB1TC odules have

the unique feature of user fir ware update!

Due to the large a ount of applications, check our

web site for anual updates and fir ware updates.

Updates can add or i prove functionality, not de-

scribed in these anuals.

Your current fir ware version can be checked using

the Velbuslink PC software.

In this anual:

1. How to connect the temperature controller p.4

2. How to connect the temperature sensor p.5

3. Setting the address for sensor and controller p.6

4. Assign a relay channel to a temperature sensor function p.7

5. Set the menu language on the controller p.

6. Setting the clock for the controller p.9

7. How to set up the sensor with the controller p.10

. Operating the temperature controller p.12

9. Programming the temperature controller p.16

10. Screen & LED indicators p.21

11. Controller menu overview p.22

Temperature controller 'VM 1TC' connection

Connection

Battery backup

To avoid losing the clock when a power failure occurs, a

backup battery (3V Lithiu CR2032) can be installed in the

battery holder at the back of the odule.

To avoid pre ature depletion of the battery, only install it

when per anent power is supplied to the Velbus syste .

ENGLISH

Place the TERM ju per if the odule is

connected at the start or end of a cable on the

Velbus.

Re ove the ju per in all other cases. Place a ju per on the

end odule of the longest cable only, NOT on each end point.

E.g. a nor al two-story house will have 3 ter inators: 1 up-

stairs end point, 1 downstairs end point and 1 in the fuse box.

2. Temperature sensor 'VM 1TS' connection and button+indicators overview

ENGLISH

US TWISTED PAIR (0.5 ²)

6 7

10 11 12 13

LED indication Settings

1 Cooling ode 8 Address setting

2 Co fort ode 9 Ter inator

3 Day ode

4 Night ode Wiring

5 Heating or air-conditioning on 14 power supply 12 to 18Vdc

15 Velbus

Sensor

6 Te perature sensor

Controls

7 Mode pushbutton

7+11 Assign high te perature alar

7+12 Assign low te perature alar

7+13 Assign circulation pu p

10 Assign airco (COOL)

11 Assign day setup for Central heating (DAY)

12 Assign extra fan for boost heat (BOOST)

13 Assign heater (HEAT)

ENGLISH

3. Address selection

In order to identify each odule in your syste it is necessary to set an unique address

for each odule. This address will also be used by the PC software to scan all the ad-

dresses and to identify the odules.

CAUTION: Addresses 81,91,A1, B1, C1, D1, E1, F1 & FF can NOT be used, they are

reserved for learning odes.

Exa ples of valid addresses: 01, 02, 03…. 0A, 0B…, 1A, 1B…

A total of 248 valid addresses can be selected for this odule.

Example of a valid address: “0 1”

VM 1TS : ADDRESS SETTING USING THE 2 ADDR ROTARY SWITCHES.

1. Press and HOLD the ‘Menu’ button to open the extended enu.

2. Scroll through the extended enu using ↑ or ↓ buttons until the

‘’Configuration” enu appears, select using the → button.

3. Scroll through the Configuration enu using ↑ or ↓ buttons until the

‘’Address” enu appears

4. Select the Address enu using the → button.

5. Enter a unique address (‘01’...‘FE’) using the ↑ or ↓ button.

6. Confir the address using the → button.

7. Exit the enu using the 



 button.

VM 1TC : ADDRESS SETTING USING THE MENU

↑

3 4 2

6 7

Each module on the Velbus system must have its own

unique address, write down the address for later use!

ENGLISH

4. Assign a relay channel to a temperature sensor function

(can also be performed using PC, advised)

On the sensor module: Set the sensor odule in anti-freeze ode by pressing the push button on the front panel repeat-

edly until all LED’s are off.

On the relay module:

Select one of the below functions: (ask someone to help if needed)

To assign a room heater or room water valve to a relay contact (>> this will mostly be used)



Press button 13 on the sensor until relay engages

To assign the air-conditioning syste (fan or co pressor control) to a relay contact:



Press button 10 on the sensor until relay engages.

To assign the central heating syste day/night setting to a relay contact:



Press button 11on the sensor until relay engages.

To assign an extra fan for quick heating or cooling (boost) to a relay contact:



Press button 12 on the sensor until relay engages

To assign the central heating syste ain pu p to a relay contact



Press button 7+ button 13 on the sensor until relay engages

To assign a low te perature alar to a relay contact



Press button 7+ button 12 on the sensor until relay engages

To assign a high te perature alar to a relay contact



Press button 7+ button 11 on the sensor until relay engages

Mode Time1

ADDR

First re e ber the address of the

odule to reinstate it later on. Set the

Address rotary switches to 'C1', 'C2',

'C3, or 'C4', depending on the chosen

channel. The 'MODE' LED of that

channel will flash to indicate learning

ode.

Set the MODE and TIME1 rotary switches of the

chosen channel to

'0' (instant control)



Do not forget to set the address of the

relay odule back to its original value.



Repeat the procedure for other sensors

or other functions.

10 11 12 13

ENGLISH

5. Set the menu language on the controller

1. When applying power to the controller for the

first time, only the time is shown on the display.

2. Press and HOLD the ‘Menu’ button to open the

extended enu. Scroll to “Configuration” enu

using the ↑ or ↓ buttons. Confir using the →

button.

3. Enter the language enu using the → button.

4. Choose the desired language using the ↑ or ↓

buttons.

5. Confir the language selection using the → button.

6. Exit the enu using the 



 button.

↑

See display & menu overview on page 21 & 22

6. Setting the clock

ENGLISH

It is i portant to set the correct ti e for the internal clock.

Setting the ti e on this odule will synchronise all clocks in your Velbus syste .

2 5

When applying power to the controller for the first time,

only the time is shown on the display.

1. Open the “short” enu by pressing the ‘Menu’ button.

2. Scroll to "clock set" enu using ↑ or ↓ buttons.

3. Select the set clock enu using the → button. The day-

indication flashes.



Set the day using ↑ or ↓ buttons.



Confir using the → button. The hour-indication flashes.



Set the hour using ↑ or ↓ buttons.



Confir using the → button. The inutes-indication flashes



Set the inutes using ↑ or ↓ buttons.

4. Confir using the → button to start the clock fro the set

ti e.

5. Exit the enu using the 



button.

See display & menu overview on page 21 & 22

↑

7. Sensors setup

ENGLISH

Before the controller can work with the te perature sensors it ust first scan the network for all connected sensors.

If temperature sensors are installed or removed afterwards, the search process must be repeated to update the list of

sensors to the new situation. NOTE: Make sure "all rooms" or "zone" is not selected.

1. Press and HOLD the ‘Menu’ button to open the extended enu.

Scroll through the extended enu using ↑ or ↓ buttons until the

‘Configuration’ enu appears. Select the configuration enu

using the → button.

2. Scroll through the Configuration enu using ↑ or ↓ buttons until

the ‘Scan sensors’ ite appears.

3. Confir the scan sensors enu using the → button.

The search for sensors on the network is now in progress.

4. Once the search process is co pleted, the first of the connected

te perature sensors is shown on the display.

Searching for temperature sensors

↑

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Velleman Regolatori di temperatura

Velleman

Velleman K641LX Manuale utente

Velleman

Velleman VMA335 Manuale utente

Velleman

Velleman VELBUS VMB1TSW Manuale utente

Velleman

Velleman WS8426 Manuale utente

Manuali Regolatori di temperatura popolari di altre marche

Swegon

Swegon LUNAd MB Manuale utente

Lucky Reptile

Lucky Reptile Thermo Control II Manuale utente

SENSORMETRIX

SENSORMETRIX Argon 100 Manuale utente

Fuji Electric

Fuji Electric PXE4 Manuale utente

Yuyao gongyi

Yuyao gongyi XMT-808 series Manuale utente

Selec

Selec TC544C Manuale utente

P.W. KEY

P.W. KEY rt-208gt Manuale utente

Future Design

Future Design FDC-9200 Manuale utente

BH Thermal

BH Thermal BriskONE Manuale utente

Omron

Omron E5EX-H Manuale utente

West Control Solutions

West Control Solutions KS 45 Guida rapida

MCS

MCS RITC-15B Manuale utente

SMC Networks

SMC Networks Thermo-con INR-244-639 Manuale utente

eltherm

eltherm Ex-TC It Series Manuale utente

Omron

Omron C200H-TV Series Manuale utente

industrie technik

industrie technik CA1 Manuale utente

KRAL

KRAL EET 32 Manuale utente

dixell

dixell XR420C Schema elettrico