Velleman DVR4MQAEB Manuale utente

DVR4MQAEB - 1 - VELLEMAN

DVR4MQAEB – DIGITAL 4-CHANNEL MULTIPLEXER QUAD MPEG-4 RECORDER + ETHERNET

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm

the environment.

Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised

company for recycling.

This device should be returned to your distributor or to a local recycling service.

Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for buying the DVR4MQAEB! Please read the manual thoroughly before bringing this device into service. If

the device was damaged in transit, don't install or use it and contact your dealer. Contents: 1 digital video recorder, 1

power adapter, software, accessories, HDD key and this manual.

2. Safety Instructions

Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will

not accept responsibility for any ensuing defects or problems.

THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE

PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE

WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS

ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS

OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS

GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT

RELATING TO PROMOTIONAL INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED

FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM

3. Features

MPEG4 DVR technology:

ocompression format provides crystal clear image with real time performance

Multiplex:

oallows live display, record, playback, backup, and network at the same time

Long recording period:

o500GB can record more than 18 days. (4CH, Frame Best Quality, 30IPS)

Backup function

obackup files with USB memory stick and network remote recording & backup

Remote surveillance:

oremote surveillance with licensed software AP and IE browser. Web surveillance supports 5 users

simultaneously.

Be very careful during the installation: touching live wires can cause life

threatening electroshocks

Keep this device away from rain and moisture.

Be aware of the presence of uninsulated dangerous voltage.

DVR4MQAEB - 2 - VELLEMAN

Intelligent motion trigger recording:

owith advanced motion detection function, scheduled motion detection recording

(4 different adjustable factors for motion detection sensitivity) and convenient search function,

customized security environment is achieved.

oalarm trigger recording will send alert with images to designated e-mail and FTP address

osupports pre-alarm recording (8MB).

Covered recording:

oa mask replaces the live image with a blank screen & the monitor shows nothing but recording is still on.

A/V support:

osupports 2 audio-in, 1 audio-out to record sounds.

osupports VGA output to monitor (optional).

General:

osupports multilingual OSD

osystem auto recovery after power restoration.

osupports daylight saving function.

osupports manual / timer / motion / alarm / remote recording functions.

owatermark function ensures authentication of recorded images.

osupports TCP/IP, PPPoE, DHCP and DDNS network connection.

PACKAGE CONTENTS:

- digital video recorder

- adapter (with 2 converters EU and UK)

- licensed software AP (application)

- accessories

- manual and quick start

4. Specifications

•system: NTSC / PAL (switchable)

•video compression format: MPEG4

•video input : 4 channels: composite video signal 1Vpp / 75 ohm BNC

•video loop output: 4 channels composite video signal 1Vpp / 75 ohm BNC

•video output:

omain monitor output: Composite video signal 1 Vp-p 75ΩBNC

ocall monitor output: Composite video signal 1 Vp-p 75ΩBNC

•maximum recording rate

oframe: 720 x 480 pixels @ 30 IPS (NTSC) or 720 x 576 pixels @ 25 IPS (PAL)

oCIF: 352 x 240 pixels @ 120 IPS (NTSC) or 352 x 288 pixels @ 100 IPS (PAL)

•Adjustable Recording Speed

oframe: 30, 15, 7, 3 IPS (NTSC) oder 25, 12, 6, 3 IPS (PAL)

oCIF: 120, 60, 30, 15 IPS (NTSC) oder 100, 50, 25, 12 IPS (PAL)

•image quality Setting: Best, High, Normal, and Basic

•hard disk storage: IDE-Typ, ATA66, IDE type, ATA66, supported HDD ＊1 , support HDD capacity over 400GB

•HDD Quick Cleaning: Quick clean up the “index system” of the recorded files. 250GB under 2 seconds

•recording mode: manuell, timer, motion, alarm

•watermark: yes

•refresh rate: 120 IPS for NTSC and 100 IPS for PAL

•audio I/O: 2 audio inputs, 1 audio output (mono)

•motion detection area: 16 ×12 grids per camera for all channels

•motion detection sensitivity: 4 adjustable variables with precise calculation for motion detection

•pre-alarm recording: yes (8MB)

•USB interface: supports USB 1.1/2.0 USB memory stick

•backup device: supports USB 1.1/2.0 USB memory stick and network

DVR4MQAEB - 3 - VELLEMAN

•web transmitting compression format: motion JPEG

•Ethernet: 10/100 Base-T; supports remote control and LiveView through Ethernet

•web interface: supports licensed software AP and IE-browser

•network connection: TCP/IP, PPPoE, DHCP und DDNS

•PTZ control: PELCO-D protocol

•dwell time (sequential channel switch): programmable and adjustable

•alarm I/O: 4 inputs, 1 output

•zoom: 2x digital zoom (live mode)

•key lock: ja

•video loss detection: ja

•camera title: up to 6 letters

•video adjustable: hue／colour／contrast／brightness

•date display format: YY/MM/DD, DD/MM/YY, MM/DD/YY and OFF

•power source: 19VDC (included)

•power consumption < 42W

•operating temperature: 10°C ~ 40°C

•dimensions: 343mm (W) ×59mm (H) ×223mm (D)

•optional peripheral

5. Description

a. Front panel

1. LED light

HDD: HDD is reading or recording.

HDD Full: HDD is full.

ALARM: Alarm has been triggered.

TIMER: When timer recording is turned on.

PLAY: Under playing status

REC: Under recording status

2. MENU

Press “MENU” button to enter main menu.

3. ENTER / SET

Press “ENTER” button to confirm.

Press “SET” to change channel display position.

Press “▲▼◄►“ to select the channel which you like to change.

Press “＋” or “－” select the channel which you would like to show.

Press “ENTER” button to confirm.

Press "MENU" to leave the menu.

4. SEARCH

Press this button to enter the search mode.

5. SLOW

Under playback mode, press SLOW for a slow playback.

6. ZOOM

Press “ZOOM” button to enlarge the picture of selected channel (under live mode).

DVR4MQAEB - 4 - VELLEMAN

7. / -

Press to show the 4-channel display mode.

Press – to change the setting in the menu.

8. SEQ / +

Press SEQ to activate the call monitor function. Press SEQ again to escape this mode.

Press + to change the settings in the menu.

9. POWER

Turn the DVR4MQAEB on or off with this button. In the recording mode, stop the recording before switching off

the device.

10.CH1, CH2, CH3, CH4

Press one of these buttons to select the channel.

11.REC

Activation of the manual recording.

12.PLAY

Playback of the last recorded files.

13.▲/ , ▼/ ■, ◄/ , ►/

Press ▲▼◄►to move the cursor up, down, left or right.

Under playback mode: press to pause the playback, press ■to stop the playback, press to fast rewind and

press to fast forward.

14.

Press these two buttons to choose live or playback sound of the two audio channels.

15.

Press these two buttons at the same time to enter / exit the PTZ control mode.

16.POWER

Press “POWER” button on the DVR front panel to shutdown, and then press “POWER” + “►“ to switch to PAL

system. (Press the buttons until the monitor show the video image of the DVR.)

Press “POWER” button on the DVR front panel to shutdown, and then press “POWER” + “◄“ to switch to NTSC

system.

(Press the buttons until the monitor show the video image of the DVR.)

17. Press “MENU” + “ENTER” buttons on the DVR front panel to key lock.

b. Rear Panel

DVR4MQAEB - 5 - VELLEMAN

1. 1.75Ω/ HI

Switch to HI when using the LOOP function. If not, switch to 75Ω.

2. VIDEO INPUT / LOOP (channels 1-4)

INPUT: Connect to a video source such as a camera.

LOOP: Video output.

3. MONITOR

Connect to the main monitor.

4. CALL MONITOR

Connect to the call monitor. Show the channel switch display. When the alarm is triggered, the call monitor will

show the image of the triggered channel for a period of time.

5. AUDIO IN (2 x)

Connect to an audio source such as a camera with audio function. When starting the recording function, the audio

input will be recorded.

6. AUDIO OUT

Connect to the monitor or the speaker with 1 mono audio output of the same source.

7. D/V POORT (Digital Video Port)

Connect to a VGA card.

8. EXTERE I/O POORT

Connect to an external device.

9. LAN

Connect to the internet by a LAN cable.

10.LINK / ACT LED

When the internet is activated, the LED will turn on.

11.POWER

Connect to the provided adapter.

12.USB

Supports firmware updates and file backups.

6. Installation and Connection

a. Connection

Connect all the devices to set up a surveillance system, as shown below.

1. Install HDDs:

The HDDs must be installed before the DVR is turned on.

2. Connect cameras.

3. Connect monitors.

4. Connect the external devices.

5. Connect power.

The stand-by LED will be red. Press the POWER button. The power LED will be red.

It takes approx. 10 to 15 second to boot the system.

NOTE: Please refer to Appendix #1 for HDD installation instructions.

NOTE: Please refer to Appendix #2 for pin configurations of the external I/O port.

DVR4MQAEB - 6 - VELLEMAN

7. Basic operation

a. Recording

The DVR offers three recording modes: manual record,

event recording, and timer record. If power is off

accidentally, recorded video files will still be stored in the

HDDs. The DVR will return to the original recording status

after the power has been restored.

1) MANUAL RECORDING (continuous recording):

Recording is initiated by manually pressing the “REC”

button.

2) EVENT RECORDING (triggered by motion or external

alarm): When this function is activated, the recording is

triggered by motion or external alarm and indicated by “ ” and “ ”.

3) TIMER RECORDING (scheduled time): Recording is scheduled by the timer and is indicated by “TIMER

RECORD”.

DVR4MQAEB - 7 - VELLEMAN

NOTE: When the HDDs are full under O/W recording mode, previous recorded files may be overwritten without

further warning notices.

b. Playback

Press PLAY, the DVR will display the last recorded video.

1. FAST FORWARD (F.F.) & FAST REWIND (REW):

You can increase speed to fast forward and rewind.

In the playback mode:

＊Press ” ” once to get 4x speed forward, press twice to get 8x speed etc. The maximum speed can reach

32x.

＊Press ” ” once to get 4x speed rewind, press twice to get 8x speed etc. The maximum speed can reach

32x.

＊The type of recording image size (frame or CIF) will also be shown on the screen.

2. PAUSE / IMAGE JOG:

Press the “ ” button to pause the current image displayed on the screen.

In the Pause mode:

＊Press ” ” once to forward frame by frame.

＊Press ” ” once to rewind frame by frame.

3. STOP:

Press the “■” button under all circumstances to return the DVR to live monitoring mode.

4. CHANNEL SHIFT:

＊Display mode:

Press MODE “ ” button to display 4 channels.

＊Full Screen Switch:

Press “＋” or “ ” button to show the full screen channels.

＊Channel display switch:

Press “SET” to change channel display position.

Press “▲▼◄►“ to select the channel you would like to change.

Press “＋” or “－” select the channel you would like show.

Press “ENTER” button to confirm.

5. SLOW PLAYBACK:

Press “SLOW” button to get 1/4x speed playback, press twice to get 1/8x speed.

6. AUDIO:

Press simultaneously to select live or playback sounds of the 2 audio channels.

＊AUDIO 1 (L) ; AUDIO 1 (P)

＊AUDIO 2 (L) ; AUDIO 2 (P)

L: live audio

P: playback audio

DVR4MQAEB - 8 - VELLEMAN

8. Detailed menu configuration

a. Menu diagram

DVR4MQAEB - 9 - VELLEMAN

b. Main menu options - RECORD

Press “MENU” to enter the main menu. The standard password is 0000. Enter the password and press "ENTER" (

you can change the password later on, see "Advance menu: SYSTEM p.16"

Use the following buttons to set the menu:

Use“▲▼◄►“ to move the cursor.

Use “＋, －” to select the numbers.

Press “ENTER“ to enter the submenu / confirm your choice

Press “MENU“ to go the OSD menu / to confirm / to leave the menu.

1. MANUAL RECORD ENABLE:

Start / stop the manual recording function.

2. EVENT RECORD ENABLE:

Start / stop the event recording function. When this function is activated, the recording will be triggered by motion

or external alarm.

3. TIMER RECORD ENABLE:

Start / stop the timer recording function.

4. OVERWRITE:

Select to overwrite the previous recording video in the HDD. When the HDD is full under O/W recording mode,

previous recorded files will be overwritten without further warning notices.

5. RECORD IMG SIZE:

There are two recording options: FRAME & CIF. When changing the recorded image size, stop the recording first.

6. RECORD QUALITY:

There are four quality settings: BEST, HIGH, NORMAL & BASIC

7. MANUAL RECORD IPS:

Recording is activated by pressing the “REC” button. Select the images per second of MANUAL RECORD. The

options are as follows:

NTSC: FRAME: 30, 15, 7, 3 PAL: FRAME: 25, 12, 6, 3

CIF: 120, 60, 30, 15 CIF: 100, 50, 25, 12

8. EVENT RECORD IPS:

Recording is activated by event (alarm and motion trigger). Select the images per second of EVENT RECORD.

The options are as follows:

NTSC: FRAME: 30, 15, 7, 3 PAL: FRAME: 25, 12, 6, 3

CIF: 120, 60, 30, 15 CIF: 100, 50, 25, 12

9. TIMER RECORD IPS:

Recording is activated by timer schedule. Select the images per second of TIMER RECORD. The options are as

follows:

NTSC: FRAME: 30, 15, 7, 3 PAL: FRAME: 25, 12, 6, 3

CIF: 120, 60, 30, 15 CIF: 100, 50, 25, 12

10.TOTAL IPS SHARE:

There are two IPS settings:

FIX: IPS per channel = RECORD IPS ÷ 4 channels

GROUP (suited for Frame Modus):

IPS per channel = RECORD IPS ÷ number of channels under recording

RECORD

MANUAL RECORD ENABLE

EVENT RECORD ENABLE

TIMER RECORD ENABLE

OVERWRITE

RECORD IMG SIZE

RECORD QUALITY

MANUAL RECORD IPS

EVENT RECORD IPS

TIMER RECORD IPS

TOTAL IPS SHARE

(MENU

)

RECORD

TIMER

DATE

ADVANCE

DVR4MQAEB - 10 - VELLEMAN

c. Main menu options: TIMER

Move the cursor to “TIMER” and press ”ENTER”. The screen will show the following options:

1. DATE:

A scheduled record date (SUN/MON/TUE/WED/THU/FRI/SAT/MON–FRI/SAT-SUN/DAILY/OFF) can be set to

activate the timer recording.

NOTE 1: Specific date can be changed with the “＋” or “－” buttons.

NOTE 2: If you plan to set the timer recording across midnight, there are two ways for setting the timer recording

schedule:

Example 1: If you only want to set recording timer schedule from every Sunday 23:30 to Monday 23:30, then set

the recording timer schedule as Sunday from 23:30 to 23:30.

Example 2: If you plan to set the timer recording from Sunday 08:00 to Monday 15:00, then set the recording

timer schedule as Sunday from 08:00 to 00:00 and Monday 00:00 to 15:00.

2. START:

Select the starting time for the recording.

3. END:

Select the finishing time for the recording.

d. Main menu options: DATE

Move the cursor to the “DATE” and press ”ENTER”. The screen will show the following

options:

1. DATE:

Set the correct time of the DVR (YEAR / MONTH / DAY / HOUR / MIN / SEC).

2. FORMAT:

There are three date formats: Y-M-D, M-D-Y, D-M-Y.

(MENU)

RECORD

TIMER

DATE

ADVANCE

RECORD

DATE START END

OFF 00 : 00 00 : 00

DAILY 08 : 00 18 : 00

SUN 06 : 00 23 : 00

MON-FRI 00 : 00 00 : 00

OFF 00 : 00 00 : 00

(MENU)

RECORD

TIMER

DATE

ADVANCE

DATE

DATE 2006-MAR-28 13: 23: 00

FORMAT Y-M-D

DAYLIGHT SAVING ON

Indice

Altri manuali Velleman Registratore vocale

Velleman

Velleman MVR2 Manuale utente

Velleman

Velleman MVR3 Manuale utente

Velleman

Velleman K8047 Manuale utente

Velleman

Velleman MVR4 Manuale utente

Velleman

Velleman DVR4T1 Manuale utente

Velleman

Velleman PCS10 Manuale utente

Velleman

Velleman DVR4H5 Manuale utente

Velleman

Velleman MVR1 Manuale utente

Velleman

Velleman MVR4 Manuale utente

Velleman

Velleman DVR8T2 Manuale utente

Velleman

Velleman DVR4MQAE Manuale utente

Velleman

Velleman DVR4H3 Manuale utente

Velleman

Velleman DVRSD1 Manuale utente

Velleman

Velleman MVR1N Manuale utente

Velleman

Velleman MVR3 Manuale utente

Velleman

Velleman MVR6 Manuale utente

Velleman

Velleman PCRU01 Manuale utente

Velleman

Velleman DVM171THD Manuale utente

Manuali Registratore vocale popolari di altre marche

Sony

Sony ICD-UX533F Manuale utente

RCA

RCA VR5230 Manuale utente

Ramsey Electronics

Ramsey Electronics BULLSHOOTER ENDLESS LOOP BS2C Guida utente

Sony

Sony TCM-400DV Manuale utente

LogTag

LogTag TREL30-16 Manuale utente

SVAT

SVAT CVP800 Manuale utente

Marantz

Marantz PMD620 Manuale utente

Zoom

Zoom H4next Manuale utente

Roland

Roland BR-900CD Manuale utente

JVC

JVC ProHD GY-HMZ1U Manuale operativo e di manutenzione

Panasonic

Panasonic PQT8531-P Manuale utente

Sanyo

Sanyo TRC-6400 Manuale utente

Tascam

Tascam DR-07 Manuale utente

Olympus

Olympus DW-90 Manuale utente

Sanyo

Sanyo ICR-B150 Manuale utente

Korg

Korg D4 Manuale utente

Sony

Sony ICD-SX46 - Ic Recorder Manuale utente

Olympus

Olympus DIGITAL VOICE RECORDER WS-200S Istruzioni per il montaggio