Venstar T1010 Manuale utente
Venstar Inc. 08/07
Use with most Air Conditioning & Heating Systems including: 1 or 2 Stage
Electric Cooling & 2 Stage Gas Heating, Heat Pump, Electric or Hydronic Heat.
Digital
Thermostat
Digital
Thermostat
residential
T1010
HEAT
COOL HEAT
PUMP
PROGRAMMABLE
Single Day
PROGRAMMABLE
Single Day
up to
& 2-cool
up to
& 2-cool
2-heat
2-heat
THERMOSTAT
Control up to 2 Heat &
2 Cool Stages
HP Stages: 2 Heat, 2 cool
Single Day Programmable
4 Settings Per Day
Auto Changeover
5 min. Built-In Compressor
Protection
Back-Lit Display
One For All Works with
Virtually All Equipment
‘O’ or ‘B’ Terminal
Non-Volatile Memory
Keypad Lockout
Display Either F or C
OWNER’S
MANUAL
OWNER’S
MANUAL
P/N T1010
CAUTION Follow Installation Instructions carefully.
DISCONNECT POWER TO THE HEATER -
AIR CONDITIONER BEFORE REMOVING
THE OLD THERMOSTAT AND INSTALLING
THE NEW THERMOSTAT.
WARNING
Page 1
Table Of Contents
FRONT PANEL
DISPLAY
QUICK START Set the clock and go
SELECTING THE HEAT
OR COOL MODE
BASIC OPERATION
PROGRAMMING A DAILY
SCHEDULE
ADVANCED SETUP
ABOUT ADVANCED FEATURES
& OPERATION
WARRANTY
2
3
4
5
6
10
14
18
7
Venstar Inc. 08/07
Front Panel
Liquid Crystal Display
with Thermoglow
Up/Down Buttons
Mode Button
Fan Button
Heat or Cool Indicator
Red = Heat, Green = Cool
AUTO COOL
76
HEAT
68
Page 2
Mode Indicators - Page 5
Selects the operational mode of the equipment.
HEAT - Indicates the heating mode.
COOL - Indicates the air conditioning mode.
AUTO - Indicates the system will automatically
changeover between heat and cool modes
as the temperature varies.
AUTO (Program) - When program mode is entered
the letters ( ) appear for two seconds and
the Auto icon blinks continuously to indicate
the time period program is enabled to run.
OFF - Indicates heating and cooling are turned off.
Room Temperature Display
Indicates current room temperature.
Desired Set Temperature - Page 6
Indicates desired room temperature(s).
Fan On icon - Page 6
Indicates constant, continuous fan operation.
When Fan On is not lit - indicates the fan will only
operate when necessary to heat or to cool.
Display
Fan On
AUTO
OFF
COOL
88
HEAT
88
Page 3
a
00
i2
Hours
Minutes
am/pm
Press the MODE and FAN buttons
at the same time for two seconds
to enter Setup screens.
Press the MODE and
FAN buttons at the
same time to return
to normal operation.
Quick Start Set the Clock and Go
The thermostat is preprogrammed from the factory to operate
one or two stage equipment* without the need for further
programming. To optimize the installation of this thermostat,
follow the instructions in the Advanced Setup section.
Setting the Clock
MODE
FAN
MODE
FAN
Tip: To change hours quickly,
press and hold the FAN
button and press the UP or
DOWN buttons.
During Setup & Programming:
Pressing the UP or DOWN
butt ons will modify th e
flashing selection.
To adjust the
Clock use
* The thermostat is not preprogrammed from the factory to operate
electric heat or heat pump systems. To control these systems,
follow the steps in the Advanced Setup section, page 11.
buttons.
Page 4
HEAT
74
72
COOL
72
72
AUTO COOL
74
HEAT
72
72
OFF
72
AUTO COOL
74
HEAT
72
72
Selecting the Heat or Cool Mode
Press
MODE
Press
Press
Press
MODE
MODE
MODE
The HEAT setting indicates the
temperature the room has to
reach before the furnace will
turn on to heat the room.
Heating Only
The COOL setting indicates the
temperature the room has to
reach before the air conditioner
will turn on to cool the room.
Cooling Only
OFF indicates both heating
and air conditioning
systems are turned off.
Off
AUTO will automatically select
heat or cool based on room
temperature demand.
Heating or Cooling
Time Schedule for
Heating or Cooling
The Auto setting will activate
the time period programming for
the cooling or heating setpoint
ONLY (Morning, Day, Evening &
Night Periods). The Auto icon will
blink to indicate that the thermostat
is in the Program mode.
( )
Select Mode by Pressing the MODE Button
Page 5
AUTO COOL
76
HEAT
68
Fan On
COOL
76
Selecting Your Desired Temperature
(adjusting the setpoints)
Basic Operation
AUTO MODE
Pressing the UP or DOWN buttons in Auto mode will adjust
both the heat and cool set temperatures simultaneously.
buttons.
Adjust the desired
set temperature with the
HEAT OR COOL MODE
Pressing the UP or DOWN buttons in Heat or Cool mode will
adjust only the heat or cool set temperature.
buttons.
Adjust the desired
set temperature with the
Using the Fan Button
Press
FAN
Fan On indicates constant fan
operation. You may turn the fan
on even if the thermostat is in the
Off mode. Pressing the FAN button
toggles this feature on or off.
COOL
76
Page 6
a
00
6
COOL
78
i
COOL
78
HEAT
70
i
Press
Press
Press
Continued
MODE
MODE
MODE
Press the MODE button. While holding MODE,
press the UP button for two seconds to enter
time period programming.
MODE
NOTE: If the thermostat is configured for single setpoint
operation, time period program operation will be unavailable.
Adjust the start time
for Morning.
Adjust the cooling
setpoint for Morning.
(35 - 99 )
Adjust the heating
setpoint for Morning.
Programming a Daily Schedule
Page 7
(35 - 99 )
a
00
8
COOL
85
2
COOL
85
HEAT
62
2
p
00
6
COOL
78
3
MODE
Press
Press
Press
Press
Press
Continued
MODE
MODE
MODE
MODE
Adjust the start time
for Evening.
Adjust the start time
for Day.
Adjust the cooling
setpoint for Evening.
Adjust the heating
setpoint for Day.
Adjust the cooling
setpoint for Day.
Programming a Daily Schedule
Page 8
(35 - 99 )
(35 - 99 )
(35 - 99 )
COOL
78
HEAT
70
3
p
00
I0
COOL
82
4
COOL
82
HEAT
62
4
Press
Press
Press
Press
MODE
MODE
MODE
MODE
Adjust the start time
for Night.
Adjust the heating
setpoint for Evening.
Adjust the cooling
setpoint for Night.
Adjust the heating
setpoint for Night.
Programming a Daily Schedule
MODE
After programming is complete,
press the MODE and UP buttons
at the same time for two seconds
to leave the Setup screens. If no
buttons are pressed, the display
will leave the setup screens after
30 seconds.
Page 9
(35 - 99 )
(35 - 99 )
(35 - 99 )
Altri manuali per T1010
1
Indice
Altri manuali Venstar Termostato
Venstar
Venstar T2700 Manuale utente
Venstar
Venstar T4950SCH-IAQ Istruzioni operative
Venstar
Venstar T4975-IAQ Istruzioni operative
Venstar
Venstar T1900 Manuale utente
Venstar
Venstar T2900SCH Manuale utente
Venstar
Venstar ColorTouch T6900 Istruzioni operative
Venstar
Venstar T4700 Istruzioni operative
Venstar
Venstar T3900 Guida rapida
Venstar
Venstar T1050 Manuale utente
Venstar
Venstar T1700 Manuale utente
Venstar
Venstar T2900 Manuale utente
Venstar
Venstar T1119RF Manuale utente
Venstar
Venstar ACC0434 Manuale utente
Venstar
Venstar ColorTouch Manuale utente
Venstar
Venstar T1070 Istruzioni operative
Venstar
Venstar T1100RF Manuale utente
Venstar
Venstar ColorTouch T6800 Istruzioni operative
Venstar
Venstar T1800 Manuale utente
Venstar
Venstar T0051FS Manuale utente
Venstar
Venstar T1045 Manuale utente
