Verilux HappyLight Compact Manuale utente

Edit#: 002 Title: VT10 Bilingual Manual

Date: 01/11/19 Version: Rev22

Compact

Energy Lamp

Model: VT10

To reduce the risk of damage during shipping, the bulb for your new

HappyLight Liberty is packaged in protective bubble wrap. You must

remove the top cover, install the bulb and lens, and reinstall the

top cover prior to using your lamp. See the Bulb/Lens Installation/

Replacement section.

L'ampoule de votre nouvelle lampe HappyLight Liberty a été emballée dans

un ﬁlm à bulles d'air aﬁn de réduire le risque de bris pendant le transport.

Vous devez retirer le couvercle supérieur, installer l'ampoule et la lentille

puis réinstaller le couvercle supérieur avant d'allumer votre lampe.

Consultez la section Installation/remplacement Ampoule/lentille.

VT10_MAN_Rev22-002.indd 1 1/11/19 10:40 AM

• To avoid electrocution, do not operate this device near water.

• Do not use with power supply voltage other than 120 VAC.

• Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades

with one wider than the other. The wider blade is provided for your safety. If the provided

plug does not ﬁt in your outlet, consult an electrician for replacement of the obsolete outlet.

• Close supervision is recommended when these lamps are used by or near children, or

others who may not understand the need for these precautions.

• To prevent risk of shock or personal injury when cleaning lamp, make sure you have

turned off and unplugged the lamp and allowed sufﬁcient time for the bulb to cool.

• Do not block vents. Vents are neccessary for proper function of the lamp. Blocking them

may cause the lamp to overheat.

• Do not shorten or cut the power cord.

• Always unplug lamp before performing bulb replacement or installation and allow

sufﬁcient time for the bulb to cool.

• Light bulbs get hot quickly! Do not touch the bulb while the lamp is on.

• This bulb contains a trace amount of mercury. For safe handling, cleanup, disposal and

recycling in accordance with applicable laws in US see www.epa.gov/cﬂ and in Canada,

please visit www.ec.gc.ca/mercure-mercury/ and www.lightrecycle.ca

• This product contains mercury, a chemical known to the State of California to cause

birth defects or other reproductive harm.

• This product contains magnets. If you have a pacemaker, implantable deﬁbrillator,

insulin pump, any other type of electro-mechanical device, or brain shunts that contain

magnets, keep sufﬁcient distance (about six inches) between the device and the lamp.

• Some people may experience light sensitivity to ﬂuorescent lighting. Discontinue use if

you experience any discomfort. Follow directions for pretest on page four prior to use.

• Certain medications (e.g., anti-depressants) may induce light sensitivity which may result

in discomfort or a level of hyperactivity. Consult with your health care provider before

using this product.

• If you have a pre-existing eye condition, consult with your health care provider before

using this product.

DANGER:

WARNING:

Important Safeguards

READ ALL INSTRUCTIONS BEFORE USING

VT10_MAN_Rev22-002.indd 2 1/11/19 10:40 AM

Edit#: 002 Title: VT10 Bilingual Manual

Date: 01/11/19 Version: Rev22

Important Safeguards — continued

SAVE THESE INSTRUCTIONS

CAUTION:

• This lamp is for indoor use only.

• Avoid placing this lamp in areas that are exposed to direct sunlight or close to heat-

radiating products such as heaters. Do not place the lamp on the top of appliances that

radiate heat.

• Protect the power cord from being walked on or pinched, particularly at plugs,

convenience receptacles and the point where the power cord exits the lamp.

• Do not operate this lamp if it has been damaged in any way. For example, the power

supply cord or plug has been damaged, liquid has been spilled on or objects have

fallen onto the lamp, the lamp has been exposed to rain or moisture, the lamp does not

operate normally or has been dropped.

• This lamp may cause interference with radios, cordless telephones or devices that use a

wireless remote control, such as televisions. If interference occurs, move the lamp away

from the device, plug the lamp or the device into a different outlet or move the lamp out

of the line of sight of the remote control receiver.

• Top of lamp is secured with strong magnets. Avoid lifting or carrying lamp by the top.

• Avoid placing the lamp in areas that are dusty, humid/moist, lack ventilation or are

subject to constant vibration.

• Do not dismantle other than to replace the bulb. There are no user serviceable parts in

these lamps.

• This lamp is not for use with light dimmers, timers, motion detectors, voltage

transformers or extension cords.

• Do not leave the lamp unattended during use.

• Do NOT use lubricating agent in assembly. Please see troubleshooting section if you are

having difﬁculty assembling your lamp.

• Use only the type of bulb and maximum wattage indicated by Verilux.

• Never cover the lamp or place anything on top of it when it is in operation.

• Do not use solvents or cleaners containing abrasives, or ammonia-based cleaners on

this product.

• After cleaning the lamp, all moisture should be properly wiped away and dried before

restoring power.

†This device complies with Part 18 of the FCC Rules.

This Class B digital apparatus complies with Canadian ICES-005.

VT10_MAN_Rev22-002.indd 3 1/11/19 10:40 AM

Your new Verilux HappyLight Energy Lamp is a remarkable product with

many features and beneﬁts. It:

• delivers Natural Spectrum light to your home, ofﬁce, dorm room or apartment.

• cues your body's own energy enhancers to help you regain focus and concentration.

• has up to 10,000 LUX* of bright Natural Spectrum light to lift spirits, sharpen

concentration and improve energy levels.

• is designed with a compact shape and small footprint to make it easy to place in a

convenient location.

• includes an energy-efﬁcient, 26-watt bulb that lasts up to 10,000 hours and provides

ﬂicker-free illumination.

Device Pretest

Features

To help determine if you have sensitivity to light treatment, we recommend

that you perform this pretest upon ﬁrst use of this device:

Step 1 - Turn on the lamp and position it about 45cm/18 inches from your

face. (Do not look directly into the lamp.)

Step 2 - Operate the lamp for approximately 10 minutes and turn it off. If the

light has caused any discomfort, stop using it and consult a doctor. If

you have no discomfort, you may consider gradually decreasing the

distance from the lamp and increasing the use time, which results in

more lamp intensity and greater effect. For your initial sessions, you

should monitor the degree of any discomfort and accordingly adjust

the time used and lamp location.

WARNING: Some people may experience light sensitivity to ﬂuorescent

lighting. Discontinue use if you experience any discomfort. Prior to using, follow

the "Device Pretest" directions, shown above.

WARNING: Certain medications (e.g., anti-depressants) may induce

light sensitivity which may result in discomfort or a level of hyperactivity. Consult

with your health care provider before using this product.

WARNING: If you have a pre-existing eye condition, contact your health

care provider prior to use.

* 10,000 lux at 10cm/4" from lamp. 5,000 lux at 15cm/6" to 20cm/8" from lamp.

VT10_MAN_Rev22-002.indd 4 1/11/19 10:40 AM

Edit#: 002 Title: VT10 Bilingual Manual

Date: 01/11/19 Version: Rev22

Minimum Recommended Program

Researchers at the National Institute of Health demonstrated that white light,

in a range of 2,500 to 10,000 LUX (a measurement of light intensity), helped to

reverse the symptoms of “Winter Blues.”

Exposure strategies affect people differently. We all have different reactions to

our environment. It is important to establish a distance and schedule that is

comfortable for you. We recommend you use the light regularly and at about the

same time each day. It is not necessary to sit in front of the lamp continuously.

You can divide the time into several mini-sessions. Continue to use the

HappyLight daily to feel an improvement in your mood and activity level.

When you are feeling sluggish and lethargic, spend more time with the light, sit

closer to it or increase the light intensity. If you feel a sort of edginess, as though

you have consumed too much coffee, it may be time to turn off the unit or reduce

the intensity of the light.

* Recommended exposure time is a function of output and distance. Individual

results may vary. Also, refer to the warnings at the bottom of the Device Pretest

section of this manual.

WARNING: Certain medications (e.g., anti-depressants) and diagnosed

mental health conditions may induce light sensitivity, which may result in

discomfort, hyperactivity, or hypomania. Consult with your healthcare provider

before using this product.

WARNING: If you have a pre-existing eye condition, or are at risk for

developing Age Related Macular Degeneration or other eye conditions consult with

your healthcare provider before using this product.

30 minutes

1hour*/day

VT10_MAN_Rev22-002.indd 5 1/11/19 10:40 AM

The HappyLight should be positioned as

close as 4 inches, but within 24 inches

of your face and should be slightly off-

center. (See diagram.) Note: Do not look

directly into the lamp.

The light from the HappyLight must be

directed at your eyes; therefore, your

eyes must be open to achieve the full

beneﬁt. Note: Tinted glasses reduce the

amount of light reaching your eyes.

When you are feeling sluggish and

lethargic, spend more time with the light,

sit closer to it or adjust the settings to

increase the intensity. If you experience

edginess or are over-stimulated, move

the light farther away or reduce session times.

WARNING: Do not block vents. Vents are neccessary for proper

function of the lamp. Blocking them may cause the lamp to overheat.

CAUTION :

Avoid placing this lamp in areas that are exposed to direct

sunlight or close to heat-radiating products such as heaters. Do not place the

lamp on top of appliances that radiate heat.

Operation

Use consists of sitting close to the HappyLight with your eyes open. While

staying oriented toward the light, feel free to engage in other activities such as

reading, writing, hobbies and crafts, sewing, needlepoint, applying make-up or

working at your computer or desk.

VT10_MAN_Rev22-002.indd 6 1/11/19 10:40 AM

Edit#: 002 Title: VT10 Bilingual Manual

Date: 01/11/19 Version: Rev22

WARNING: Always unplug lamp before performing bulb

replacement or installation and allow sufﬁcient time for the bulb to cool.

WARNING: This bulb contains a trace amount of mercury.

For safe handling, cleanup, disposal and recycling in accordance with

applicable laws in US see www.epa.gov/cﬂ and in Canada, please visit

www.ec.gc.ca/mercure-mercury/ and www.lightrecycle.ca

Your HappyLight uses a bulb manufactured only by Verilux. To order a

replacement, please call Verilux toll-free, at 1-800-454-4408.

Initial Bulb

Installation Bulb

Replacement Lens

Replacement Instruction Steps

1. 1. 1. Be certain the lamp is unplugged prior to

beginning.

2. 2. 2. Remove the top cover (A) by lifting ﬁrmly. The

top is secured by two (strong) magnets (B) that

will release when lifted properly.

X3. 3. Slide the lens (C) out of its channel by pulling it

gently upward.

3. X X Carefully remove the bulb from the bubble

wrap.

X4. X

Remove the old bulb by twisting it

counterclockwise until the bulb pins align with

the openings in the bulb mount and lifting

upward. (See illustration 2.)

4. 5. XInsert the new bulb into the bulb mount and

rotate it clockwise until it clicks in place. (Either

pin in either opening is ﬁne. See illustration 3.)

5. X X Remove the lens from the plastic bag that also

held this instruction manual.

6. 6. 4. (Re)install the lens and top cover, reversing the

procedure shown in "Lens Replacement" steps

two and three above.

7. 7. 5. Dispose of any old parts and packaging

according to local regulations.

Bulb/Lens Installation/Replacement

VT10_MAN_Rev22-002.indd 7 1/11/19 10:40 AM

Illus. 2

Illus. 3

Bulb

removal

closeup

Bulb insert

closeup

For clarity, lamp

shown with lens

removed.

Bulb/Lens Installation/Replacement — continued

Illus. 1

VT10_MAN_Rev22-002.indd 8 1/11/19 10:40 AM

Edit#: 002 Title: VT10 Bilingual Manual

Date: 01/11/19 Version: Rev22

Care and Cleaning

Troubleshooting

Technical Speciﬁcations

Your lamp is made from high-quality materials that will last for many years with

minimum care. You may want to periodically clean the lamp using a mild non-

abrasive cleaner and soft cloth. When cleaning, make sure you have turned off

and unplugged the unit and allowed sufﬁcient time for the unit to cool.

Before requesting service on your Verilux lamp, please:

• Make sure all power connectors, cords and plugs are inserted fully and securely.

• Be sure the bulb is securely seated in the socket. (See Bulb/Lens Installation/

Replacement section.)

• Make sure there is power to the wall outlet, or try another outlet – one that is not

connected to a dimmer.

HappyLight Compact Energy Lamp

Environment: Operating Temperature:

10 to 30°C (50 to 86°F)

Storage Temperature: -20 to 50°C

(-4 to 122°F)

Relative Humidity: 20 to 90% non-

condensing

Bulb: Replacement bulb: 26-watt 10,000-

hour bulb. Replace with Verilux brand only,

Model number CFS26GU24VLX by calling

1-800-454-4408 or visiting verilux.com.

Power: Input Power: 120 VAC, 60Hz, 0.50 A

ETL Listed in Canada and the USA

PROBLEM CHECK SOLUTION

Light Won’t

Come On

Blackening/Darkening

at Ends of Bulb

Light Flickers

Has the plug come

loose?

Is the bulb old?

Is the bulb connected

securely into socket?

Is the bulb new?

Is the bulb old?

Has the plug come

loose?

Is the bulb connected

securely to the socket?

Is the lamp connected

to a dimmer switch?

Insert plug securely into wall outlet.

Check bulb for blackening/darkening at bottom of spiral where it joins the

base (an indicator of bulb life) and replace bulb.

Be sure the bulb is securely seated in the socket. Repeat the bulb

installation process.

Always unplug lamp before performing

bulb replacement or installation.

Sometimes when a new bulb is turned on for the first time the tubing will

darken, but this will fade after a few minutes.

With older bulbs, darkening of the tubing indicates end of bulb life. (This

doesn’t affect operation except to reduce the amount of light available,

since the phosphor in that area has become inactive.) Bulb replacement

is recommended.

Insert plug securely into wall outlet.

Connect lamp plug only to wall outlet without dimmer switch.

Be sure the bulb is securely seated into the socket. Repeat the bulb

installation process. Always unplug lamp before performing

bulb replacement or installation.

WARNING:

VT10_MAN_Rev22-002.indd 9 1/11/19 10:40 AM

One-Year Limited Warranty

verilux.com/warranty

Please visit our website at: www.verilux.com or call our Customer Service Department at

1-800-786-6850

Representatives are available Monday — Friday, 9am — 5pm EST

340 Mad River Park, Waitsﬁeld, VT 05673

ATTENTION! ONCE OPENED, PLEASE DO NOT RETURN THIS PRODUCT TO THE

STORE WHERE IT WAS PURCHASED FOR REPAIR OR REPLACEMENT!

Many questions can be answered by visiting www.verilux.com, or you may call our

Customer Service Department at 1-800-786-6850 during normal business hours.

This limited warranty is provided by Verilux, Inc., 340 Mad River Park,

Waitsﬁeld, VT 05673

Verilux warrants this product to be free from defects in material and workmanship

for a period of one year from the date of the original retail purchase from Verilux or

an authorized Verilux distributor. Proof of purchase is required for all warranty

claims. During the limited warranty period, Verilux, Inc., will, at its option, repair or

replace defective parts of this product at no charge to the customer, subject to these

limitations: This limited warranty does not include any postage, freight, handling,

insurance or delivery fees. This warranty does not cover damage, defect or failure

caused by or resulting from accident, external destruction, alteration, modiﬁcation,

abuse, misuse or misapplication of this product.

This warranty does not cover damage to the product resulting from return shipping or

handling. Shipping insurance is recommended to help protect your product.

Return Authorization is required for all returns. To obtain a Return Authorization,

please contact the Verilux Customer Service Department at 1-800-786-6850.

If, during the ﬁrst three years of ownership, this product fails to operate properly,

it should be returned as speciﬁed at www.verilux.com/warrantyreplacement or as

instructed by a Verilux customer service representative at 1-800-786-6850.

Note: Verilux recommends using a quality surge suppressor on all electronic

equipment. Voltage variations and spikes can damage electronic components in any

system. A quality suppressor can eliminate the vast majority of failures attributed to

surges. Suppressors may be purchased at electronics stores.

Due to ongoing improvements, actual product may have slight variations from the product described in this manual.

VT10_MAN_Rev22

Printed in China for: Verilux, Inc.

VT10_MAN_Rev22-002.indd 10 1/11/19 10:40 AM

Altri manuali per HappyLight Compact

Indice

Altri manuali Verilux Terapia della luce

Verilux

Verilux HappyLight Liberty Manuale utente

Verilux

Verilux HappyLight Liberty XKS Manuale utente

Verilux

Verilux ClearWave Deluxe Manuale utente

Verilux

Verilux Twilight Mini Ultra VT04 Manuale utente

Verilux

Verilux HappyLight Lucent Manuale utente

Verilux

Verilux VT01-SB Manuale utente

Verilux

Verilux HappyLight Touch Plus VT42 Manuale utente

Verilux

Verilux HappyLight Liberty 5000 Select Manuale utente

Verilux

Verilux HappyLight Lumi Manuale utente

Verilux

Verilux TwiLight Mini Ultra Manuale utente

Verilux

Verilux HappyLight VTCP01 Manuale utente

Verilux

Verilux ORBit VB10 Manuale utente

Verilux

Verilux VT52 Manuale utente

Verilux

Verilux HapptLight Touch Manuale utente

Verilux

Verilux HappyLight Touch Manuale utente

Verilux

Verilux HappyLight Lumi Plus Manuale utente

Verilux

Verilux HappyLight Luxe Manuale utente

Manuali Terapia della luce popolari di altre marche

iReliev

iReliev ET-9090 Manuale elenco delle parti

iGear

iGear Bright Light iG-1073 Manuale utente

natus

natus neoBLUE Compact Manuale utente

Philips

Philips HF3305/01 Manuale utente

Philips

Philips HF3321 Manuale utente

Lumie

Lumie Vitamin L Manuale utente

Philips

Philips Pro HF3331/60 Manuale utente

iReliev

iReliev ET-1616 Manuale elenco delle parti

DEMYK LIGHTMOD PRODUCTS

DEMYK LIGHTMOD PRODUCTS SENSOSPHERE-Learning Aid Manuale utente

Beurer

Beurer TL 85 Manuale utente

Philips

Philips GoLite HF3332 Manuale utente

Lena Lighting

Lena Lighting UV-C Sterilon Hepa Manuale utente

Medic Therapeutics

Medic Therapeutics 003-156 Manuale utente

Philips

Philips HF3318/60 Manuale utente

Lumie

Lumie Brazil Manuale utente

LIH

LIH LIH14041969 Manuale utente

Thera Lite

Thera Lite Halo FGE80600 0000 Manuale utente

Philips

Philips HF3321/60 Manuale utente