Vertex Standard eVerge EVX-Link Dimensioni
EVX-Link
FAQs
How much bandwidth does the EVX Link require on a network?
1M bps
Is there a minimum network speed required or how does the
EVX Link manage the latency on a slower network (ex. satellite)?
min 256k bps for 2 sites.
IS the DB15 audio port active?
We do not use audio input/output on the DB15.
Can I walk into a customer’s office and just plug their Lan cord
into the box and demo the EVX link or do I need to configure the
box every time?
The box will need to be configured/reprogrammed to include the
IP information of the new site.
What is the speed requirement for the IP address?
It is recommended to operate at 8M bps at least.
Can I demo this box with a wireless card, if so how?
It requires other hardware that can specify the connected IP
address to the EVX-Link. The equipment setting is depending on
that equipment.
Can EVX Link be used in a router configuration?
Yes, it can be used for the router. When using a router, the network
address and port translation (NAPT) is necessary. The following
UDP (user datagram protocol) port must be connectable (21000).
Is it possible to demo easily in the field - How to set up
The easiest way is that to use the HUB to connect each EVX-Link.
The EVX-Link must setup to connect each other.
How does Link work in a LAN environment?
It transfers the DMR data to the other site using UDP protocol.
Will the EVX-Link work in a Analogue mode via the EVX-5400
Mobile as it is this device that is putting the signal into the
EVX-Link as the Mobile supports DMR and Analogue modes.
No, the EVX-Link only work for Digital mode.
EVX-Link
IP Connect System
FAQswww.vertexstandard.com / everge.vertexstandard.com
EVX-Link
VERTEX STANDARD is a trademark of Vertex Standard LMR, Inc. All other trademarks are the property of their respective owners. © 2015 Vertex Standard LMR, Inc. 08/2015
Will the EVX-Link support both Time Slots (T1 & T2 ) at the same
time via the EVX-5400 Mobile, if not the we will have to use 2
Radios and 2 EVX-Links to support the 2 time slots, and to make
it connect at both ends we will need 4 x Mobile and 4 x EVX-Links.
This will be expensive to do and possible of Interferences
between the 2 mobiles on the same frequencies to use both
time slots in DMR Mode.
The EVX-Link only supports one time slot (T1 or T2) at same time.
This is same as normal mobile channel setting.
Point 10 in the FAQ Doc is the UDP port locked to 21000, or will it
have a selectable UDP Range. They understand that the same
UDP must be used in the Network they want to build.
No, the EVX-Link cannot change the UDP port.
Does the display on the EVX-5400 mobile identify the PTT-ID of
the transmitting radio?
No, the mobile operates differently from other EVX mobiles when
interfacing with the EVX-Link. The display functionality is limited
and will not show any Receive information.
Can the mobiles that are set up to interface with the EVX-Link
communicate directly with each other through the EVX-Link
connection?
No, they only receive and rebroadcast transmissions from
subscribers active on each site. They cannot transmit directly
through the EVX-Link.
Is the Microphone on the mobile functional?
No, the Microphone is inoperable when the mobile is in EVX-Link
interface mode.
Indice
Altri manuali Vertex Standard Hardware di rete
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
