Vertex T22.1 Manuale utente
TREADMILL T22.1
OWNER’S MANUAL
2015/5/6V1.2+V1.1
1
Content
1. Overview Drawing.......................................................................................................2
2. SAFETY INSTRUCTION ............................................................................................3
2.1. Power Requirement .........................................................................................5
2.2. Add Lubricant...................................................................................................6
2.3. ADD SILICONE................................................................................................7
2.4. Level Adjustment..............................................................................................8
2.5. Power Switch ...................................................................................................8
2.6. Running Belt Adjustment..................................................................................9
3. Assembly Instructions...............................................................................................10
3.1. Pre-Assembly Check List...............................................................................10
3.2. Hardware Pack .............................................................................................. 11
3.3. Assembly Steps..............................................................................................12
4. COMPUTER OPERATION INSTRUCTION..............................................................15
4.1. Computer structure ........................................................................................15
5. Heart Rate Exercise..................................................................................................18
5.1. Heart Rate Exercise.......................................................................................18
5.2. Pulse Detection System.................................................................................19
6. Exercise Program.....................................................................................................20
7. Troubleshooting........................................................................................................30
8. Metric/ imperial conversion.......................................................................................32
2015/5/6V1.2+V1.1
2
1. Overview Drawing
2015/5/6V1.2+V1.1
3
2. SAFETY INSTRUCTION
When using this product, basic precautions should always be followed, including the
following:
Please read the instruction carefully before starting to use this product.
DANGER –To reduce the risk of electric shock：
1 Always unplug this product from the electrical outlet immediately after using and
before cleaning.
WARNING –To reduce the risk of burns, fire, electric shock, or physical injury：
1 The product should never be left unattended while plugged in. Unplug the product from
the outlet when not in use.
2 Close supervision is necessary when this product is used by or near children, invalids,
or disabled persons.
3 Be sure to use the product only for its intended use as described in this manual. Do not
use any attachment not recommended by the manufacturer in order to avoid any
danger or accidents.
4 Never operate the product if it has a damaged cord or plug, if it is not working properly,
if it has been damaged, or dropped into water. Please return the product to the service
center of seller for examination and repair.
5 Do not carry this product by the supply cord or use the cord as a handle.
6 Keep the cord away from hot surfaces or ground.
7 Never operate the product with the air vents blocked. Keep the air vents free of lint,
hair, etc.
8 Never drop or insert any objects into any openings.
9 Do not use or operate outdoors.
10 Do not operate where aerosol (spray) products are being used or where oxygen is
thin.
11 Before turning the product power off, turn all controls to the off position then remove
the plug from the outlet.
12 Connect the product to a properly grounded outlet only.
13 If the power cord is damaged, be sure to ask the manufacturer for replacement to
avoid accidents. The seller and correlative qualified professionals are as well as
eligible.
14 This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they
do not play with the appliance.
2015/5/6V1.2+V1.1
4
15 Incorrect or excessive training may cause injuries t health may results.
16 The equipment shall be installed on stable base and properly leveled.
17 A shall be safety area of 2,000mm x 1,000mm behind the equipment.
18 Maximum user weight is 180 Kgs.
19 If this treadmill can be folded, please return the elevation to the original position after
using.
20 When this treadmill is being used, it can not be folded at the same time.
Required to confirm the device completely stopped before folding
21 the safety level of the equipment can be maintained only if it is examined regularly for
damage and wear.
22 any of the adjustment devices that could interfere with the user's movement should not
be left projecting.
23 Users correct ergonomic position on the equipment shown in Figure
24 Before using this product, you should step on the it then turn on the product. Do not
turn on the treadmill before step on it.
25 Running surface Width dimensions 555*1575mm
26 The appliance is intended for household use only
27 Customer Address
2015/5/6V1.2+V1.1
5
2.1. Power Requirement
This treadmill needs special power supply:
Power Voltage（V）
Frequency（HZ）
Rated Current（A）
100
50/60
18
120
50/60
18
200
50/60
9
220
50/60
9
230
50/60
9
240+
50/60
9
Wirings should be transported according to the electric law of the local country. High
pressure wires, low pressure wires and underground wires should be transported
separately and can’t connect with or twist other wires.
Improper connection of the grounding plug can result in the risk of electric shock. Check
with a qualified electrician or serviceman if you are in doubt as to whether the products are
properly grounded. Do not modify the plug provided with the product –If it will not fit the
outlet, have a proper outlet installed by a qualified electrician.
Figure
Grounding methods
GROUNDED
OUTLET
2015/5/6V1.2+V1.1
6
2.2. Add Lubricant
Use the Hex Wrench to unscrew the hex screws inside the Rear End Cap. Then pull the
belt up and daub some SILICON to the center of the board.After that, adjust the belt to the
center of the deck, followed by tightening the screw to the original set. Adjust the running
belt according to the above steps. Half a month should be checked once
Function of LUBRICATION REQUIRED
It will remind you to add lubricant when total distance added up to 2000Km(the
distance is difference with the levels of running belt). When restarting the treadmill next
time, the character string of “ LUBRICATION REQUIRED” will show on the screen and
then into start/ready status after continuously displaying for 1 minute.
Ps: When adding lubricant, check whether the lubricant in the running belt is dried up. If it
is, then add lubricant into it.
Cancel the character string of “LUBRICATION REQUIRED” displayed on the screen
every time you restart the treadmill.After adding lubricant, restart the power and then it will
display the character string of “LUBRICATION REQUIRED” for 1 minute on the screen.
During the one minute, press speed up key and speed down key at the same time. The
number will turn to 0 after 5 seconds and cancel the character string of “LUBRICATION
REQUIRED” which will display until the next 2000km reach.
2015/5/6V1.2+V1.1
7
2.3. ADD SILICONE
Time of add SILICONE
When suggested time of adding SILICONE is achieved, please extend your hand to the
center of the running board to make sure whether there is any SILICONE before adding. If
no SILICONE on the running board, please add 30cc SILICONE to the running board. If
there is still a little SILICONE, add 15cc SILICONE to the running board.
Area of adding SILICONE
Add SILICONE from the center of the running board to the running belt ’s the left and right
side which should minus 6 cm.
2015/5/6V1.2+V1.1
8
2.4. Level Adjustment
The treadmill will wobble during workout and the incline angles will be affected if it is
placed on uneven ground.
The level adjustment method is as follows:
1 Turn Acounter-clockwise to loosen it
2 Adjust B to the proper height
3 Turn A clockwise to tighten it.
4 The left side adjustment method is the same with the right side
2.5. Power Switch
The Power Switch is on the bottom panel of the treadmill. 1 means on, 0 means off.
2015/5/6V1.2+V1.1
9
2.6. Running Belt Adjustment
After assembling the treadmill, check the operation of the running belt.
First, make sure the power supply is correct. After starting the treadmill, stand on the two
sides of the pedal(At the very start, don’t stand on the running belt).Press QUICK START
key and then increase the speed to 4.0MPH(6.4KPH) by pressing + key.
If the running belt is moving towards the right side：
Turn the right button 90°clockwise and contrarotate the left button 90°. You will find the
treadmill return to the center position automatically.
If the running belt is moving towards the left side：
Turn the left button 90°clockwise and contrarotate the right button 90°. You can also find
the treadmill return to the center position automatically.
If you find that the belt has not moved to the proper position, please repeat the steps
above.
Note：When adjusting the button, the angle can not exceed 90°which will make it
imposssible to adjust the belt to the proper position.
Indice
Altri manuali Vertex Tapis roulant
