Vertilon SIB71256 Manuale utente
User Guide
Vertilon Corporation, 66 Tadmuck Road, Westford, MA 01886 /Tel: (978) 692-7070 /Fax: (978) 692-7010 /www.vertilon.com
SIB71256
256 Channel MAPMT Interface Board
Hamamatsu H13700 Series
User Guide
Vertilon Corporation, 66 Tadmuck Road, Westford, MA 01886 /Tel: (978) 692-7070 www.vertilon.com
Disclaimer
Vertilon Corporation has made every attempt to ensure that the information in this document is accurate and complete.
Vertilon assumes no liability for errors or for any incidental, consequential, indirect, or special damages including,
without limitation, loss of use, loss or alteration of data, delays, lost profits or savings, arising from the use of this
document or the product which it accompanies.
Vertilon reserves the right to change this product without prior notice. No responsibility is assumed by Vertilon for any
infringements of patents or other rights of third parties which may result from its use. No license is granted by implication
or otherwise under the patent and proprietary information rights of Vertilon Corporation.
Copyright Information
© 2020 Vertilon Corporation
ALL RIGHTS RESERVED
SIB17256 Sensor Interface Board for Hamamatsu H13700 MAPMT
- 4 -
Vertilon Corporation, 66 Tadmuck Road, Westford, MA 01886 /Tel: (978) 692-7070 www.vertilon.com
User Guide
- 5 -
Vertilon Corporation, 66 Tadmuck Road, Westford, MA 01886 /Tel: (978) 692-7070 www.vertilon.com
Table of Contents
Product Overview .....................................................................................................................................8
Included.....................................................................................................................................................8
Typical Setup ............................................................................................................................................9
Specifications .........................................................................................................................................10
Photomultiplier Tube Anode Circuit......................................................................................................11
Anger Logic.............................................................................................................................................12
Last Dynode Output ...............................................................................................................................13
Gain Switches .........................................................................................................................................13
Top and Bottom Views ...........................................................................................................................14
Mechanical Information..........................................................................................................................15
SIB17256 Sensor Interface Board for Hamamatsu H13700 MAPMT
- 6 -
Vertilon Corporation, 66 Tadmuck Road, Westford, MA 01886 /Tel: (978) 692-7070 www.vertilon.com
List of Figures
Figure 1: Functional Block Diagram...........................................................................................................9
Figure 2: Typical Setup..............................................................................................................................9
Figure 3: Resistive Anger Logic Circuit ...................................................................................................11
Figure 4: Position Signal Plot...................................................................................................................12
Figure 5: Anode Preamplifier Response .................................................................................................12
Figure 6: Dynode Preamplifier Response................................................................................................13
Figure 7: Gain Switch Positions...............................................................................................................13
Figure 8: Top and Bottom Views .............................................................................................................14
Figure 9: SIB71256 Printed Circuit Board Dimensions ............................................................................15
Figure 10: SIB71256 3D View ................................................................................................................. 15
User Guide
- 7 -
Vertilon Corporation, 66 Tadmuck Road, Westford, MA 01886 /Tel: (978) 692-7070 www.vertilon.com
General Safety Precautions
Use Proper Power Source
The SIB71256 is powered with a +12V power source. Use with any other power source may result in damage to the
product.
Operate Inputs within Specified Range
To avoid electric shock, fire hazard, or damage to the product, do not apply a voltage to any input outside of its specified
range.
Electrostatic Discharge Sensitive
Electrostatic discharges may result in damage to the SIB71256. For this reason, the SIB71256 board is intended to be
operated in a user’s conductive instrument enclosure.
Do Not Operate in Wet or Damp Conditions
To avoid electric shock or damage to the product, do not operate in wet or damp conditions.
Do Not Operate in Explosive Atmosphere
To avoid injury or fire hazard, do not operate in an explosive atmosphere.
SIB17256 Sensor Interface Board for Hamamatsu H13700 MAPMT
- 8 -
Vertilon Corporation, 66 Tadmuck Road, Westford, MA 01886 /Tel: (978) 692-7070 www.vertilon.com
Product Overview
The SIB71256 multianode photomultiplier tube interface board provides the mechanical and electrical connectivity
between the Hamamatsu H13700 256 anode PMT and external signal processing electronics such as Vertilon’s PhotoniQ
multichannel data acquisition systems. The MAPMT is mounted to the bottom side of the SIB71256 through a pair of
socket connectors that route the PMT’s 256 anode signals and last dynode output to the board. The high voltage bias to
the PMT is supplied separately on its own cable and thus never reaches the SIB71256. The anode signals are routed to
an on-board resistive anger logic circuit that generates four anger signal outputs. Each output is fed to an inverting
amplifier and made available to the user on an SMB connector. Event position and energy information can be determined
by connecting the four anger signal outputs to customer-supplied electronics. For timing applications utilizing the last
dynode output of the PMT, the SIB71256 includes a high speed non-inverting preamplifier whose output is also available
on an SMB connector. The polarity of the preamplifiers is such that the four anger and last dynode outputs produce all
positive going signals.
The various functions on the SIB71256 are described in greater detail on the following pages. When necessary, refer to
the functional block diagram shown in Figure 1 below.
Included
SIB71256 anger logic sensor interface board for Hamamatsu H13700 MAPMT
Wall mount +12V power supply with international plug set
Five 120 cm SMB to BNC coaxial cables
Gain adjustment tool
User Manual
Mounting board for 256 channel Hamamatsu H13700 MAPMT
Includes anger logic for interface to data acquisition systems
Reduces channel count from 256 down to 4 outputs
High speed preamplifier for each anger logic output
High speed preamplifier for last dynode output
Two user-selectable gain settings
User Guide
- 9 -
Vertilon Corporation, 66 Tadmuck Road, Westford, MA 01886 /Tel: (978) 692-7070 www.vertilon.com
Figure 1: Functional Block Diagram
Typical Setup
A typical setup using a SIB71256 is shown below. The Hamamatsu H13700 MAPMT is mounted to the SIB71256 and
positioned to detect incoming light from a scintillator crystal or optical assembly. The four anger logic outputs from the
SIB71256 connect to four inputs on a PhotoniQ IQSP418 / IQSP518 multichannel PMT data acquisition system. Digitized
output data from the PhotoniQ is sent through a USB 2.0 connection to a PC for display, logging, or real time processing.
The amplified last dynode signal from the SIB71256 connects to an external discriminator that generates a trigger to the
PhotoniQ. A high voltage bias of up to negative 1200 volts is sent directly to the PMT from an SHV connector located on
the rear of the PhotoniQ. Note that the high voltage output is an optional configuration on the IQSP418 / IQSP518.
Figure 2: Typical Setup
GAIN
P255
P256
P1
P2
P3
÷ K-Z
256 to 4
ANGER LOGIC
V1
V16
V241
V256
ANODES
÷ K-Z
÷ K-Z
÷ KZ
50
50
50
50
+A DY10
50
DY10
LAST DYNODE GAIN
SIB17256 Sensor Interface Board for Hamamatsu H13700 MAPMT
- 10 -
Vertilon Corporation, 66 Tadmuck Road, Westford, MA 01886 /Tel: (978) 692-7070 www.vertilon.com
Specifications
(TA= +25C, unless otherwise noted)
Description Sym Min Typ Max Units Notes
ANODE CIRCUITS
Quantity P1 – P256 256
ANGER SIGNAL PREAMPLIFIER
Input Resistance Rin 12.4
Current Divider (High Gain) K 1
Current Divider (Low Gain) K 4
Transimpedance Z 500
Net Transimpedance Gain (High Gain) 250 Measured at anger output into 50 ohms
Net Transimpedance Gain (Low Gain) 62.5 Measured at anger output into 50 ohms
Bandwidth 160 MHz
Slew Rate 450 V/us
Output Baseline Level 12
55
50
110
mV
mV
No load
Isink = 5mA
Maximum Output Pulse 4 V Into 50 ohms
Output Impedance 50
LAST DYNODE PREAMPLIFIER
Input Resistance (High Gain) 50
Input Resistance (Low Gain) 12.4
Amplifier Gain A 10
Net Transimpedance Gain (Hi Gain) 250 Measured at anger output into 50 ohms
Net Transimpedance Gain (Lo Gain) 62.5 Measured at anger output into 50 ohms
Bandwidth 160 MHz
Slew Rate 450 V/us
Output Baseline Level 12
55
50
110
mV
mV
No load
Isink = 5mA
Maximum Output Pulse 4 V Into 50 ohms
Output Impedance 50
POWER
Supply Voltage Vsupply +11 +12 +13 V
Supply Current Isupply 70 mA
DIMENSIONS
Width W 52 mm
Length L 52 mm
Thickness T 1.57 mm (printed circuit board only)
Table 1: Specifications
Indice
Altri manuali Vertilon Hardware per computer
Vertilon
Vertilon SIB1064 Manuale utente
Vertilon
Vertilon SIB064B Manuale utente
Vertilon
Vertilon SIB164B-1018 Manuale utente
Vertilon
Vertilon SIB064 Manuale utente
Vertilon
Vertilon PhotoniQ Series Manuale utente
Vertilon
Vertilon SIB864 Manuale utente
Vertilon
Vertilon SIB332B Manuale utente
Vertilon
Vertilon SIB2316 Manuale utente
Vertilon
Vertilon SIB164B Manuale utente
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
