VEVOR FLO700 Manuale utente

Technical Support and E-Warranty Certificate www.vevor.com/support

SEWAGE PUMP

INSTALLATION INSTRUCTIONS

MODEL:FLO700

We continue to be committed to provide you tools with competitive price.

"Save Half", "Half Price" or any other similar expressions used by us only represents an

estimate of savings you might benefit from buying certain tools with us compared to the major

top brands and doses not necessarily mean to cover all categories of tools offered by us. You

are kindly reminded to verify carefully when you are placing an order with us if you are

actually saving half in comparison with the top major brands.

- 1 -

MODEL:FLO700

Have product questions? Need technical support? Please feel free to

contact us:

CustomerService@vevor.com

NEED HELP? CONTACT US!

This is the original instruction, please read all manual instructions

carefully before operating. VEVOR reserves a clear interpretation of our

user manual. The appearance of the product shall be subject to the

product you received. Please forgive us that we won't inform you again if

there are any technology or software updates on our product.

SEWAGE PUMP

- 2 -

Kindly Reminder

TheFLO700 has been developed with the utmost care, and it is tested in the

factory. Therefore, it is possible that the test water remains in the appliance.

GENERAL DESCRIPTION

The equipment should be avoided for commercial use; the FLO700 is

exclusively reserved for indoor use.The macerator pump system of the

appliance is integrated in a special way, which is only suitable for toilets

with a horizontal outlet(P-trap toilet). The macerating pump starts

automatically when a certain water level is reached. For the proper

operation of the grinder, it is necessary important to follow the installation

and maintenance instructions in this manual.

When properly installed and maintained according to the instructions 1n

this user manual, the appliance is very powerful, safe, and reliable.

- 3 -

FLO700 is specially used to connect with:

WC

Shower cabin

Wash basin

Washing machine

Bidet

Urinal

SPECIFICATIONS

Input Power Rating:

700W

Max Vertical Lift:

10M

Input Voltage:

220-240V,

50HZ

Max Temperature:

90℃

Flow Rated:

160L/MIN

Noise Level:

45 dBA

Max Horizontal Lift:

100M

Degree of Protection:

IPX4

- 2 -

INSTALLATION (DIAGRAM)

ACCESSORY LIST

- 3 -

S/N

Name

Number

A-B

Check valve with plastic elbow

1

C

Hose Clamp (32-50mm)

4

D

Rubber ring to connected the Intelflo toilet and Intelflo

pump

1

E

Plastic hose

3

F

Activated Carbon

1

G

Hose Clamp (90-110mm)

1

H

Hose Clamp (110-120mm)

1

J

Lid

1

K

Plug(It Mounted On The Pump)

3

INSTALLATION INSTRUCTIONS

(5-1), Install the rubber sleeve (D) onto the sewage pump and lock it with a

90- 110mm hose clamp(G). Be careful not to install the rubber backwards.

(5-2), The customer can select accessory A-B and check that the hose

clamp of the accessory is locked before installation. Then the customer

chooses the size of the drain pipe, which is available in l" (28mm), 1- 1/4"

(32mm), or 40mm (l- l/4") sizes. The dimensions are marked on the

- 4 -

accessories, and the customer is free to choose. In this installation

example, we choose the 1-1/4"(32mm) drain pipe size. Then use a knife to

cut the extra.

Note: The smaller the pipe diameter, the higher the lift.

(5-3), In addition, at the corner of the PVC water pipe, be sure to use a

large elbow composed of two 45-degree elbows, not a right-angle elbow;

otherwise, it will affect the vertical lifting height.

- 5 -

(5-4), Please install a ball valve (not provided) near the water outlet to

prevent sewage leakage when the pump is disassembled.

(5-5),When connecting to the main pipe, the drain pipe must flow in from

above the main pipe to prevent back-flow. As shown below:

- 6 -

8/13

(5-6), For best performance, please drain upward first and then drain the

drain pipe to the main pipe at a 2%-3% incline: otherwise, the sewage will

flow back.

INSTALLATION OF CONNECTING PIPE IN THE SHOWER ROOM

(6-1), Install the plastic hose fitting (E) and lock it with the hose clamp (C).

There are two inlet holes on the left and right sides of the sewage pump.

They are used to connect the shower room and the sink. If the water inlet is

not used, it can be plugged in with accessory K.

C

- 7 -

(6-2), When installing the shower room, first, you can install a wooden

or iron shower base or build a cement platform. For wastewater from the

shower and bath, ensure that the slope of the siphon is at least 3% (0.4

inches per 40 inches) so that the wastewater flows through the natural

gravity to the unit position. If other sanitary units are connected to the

disposal line along the disposal circuit, install check valves in the

appropriate waste pipes to prevent backflow.

Note: Please make sure that the shower room chassis is raised to a

minimum height of 6 inches (15 cm). It also depends on the distance

between the shower room and the pump.

(6-3), If you need to connect more equipment and use the top water inlet,

please open it with a saw and connect it with a hose.

Indice

Manuali Pompa dell'acqua popolari di altre marche

Neptun

Neptun NPHW 5500 Manuale utente

Sensidyne

Sensidyne Gilian BDX-II Istruzioni per l'installazione e il funzionamento

Draper

Draper 47808 Manuale utente

Trolla

Trolla 12820 Manuale utente

Sunfab

Sunfab SVH Series Manuale utente

WilTec

WilTec 50740 Manuale utente

Fieldmann

Fieldmann FVC 5015 EK Manuale utente

Everbilt

Everbilt EFSUB5-122HD Manuale utente

Graco

Graco Husky 3300e Manuale utente

esotec

esotec 101018 Manuale utente

moyno

moyno 2000 CC Manuale utente

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuale utente

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guida alla risoluzione dei problemi

DUROMAX

DUROMAX XP WX Series Manuale utente

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuale utente

Franklin Electric

Franklin Electric IPS Manuale utente

Xylem

Xylem e-1532 Series Manuale utente

Milton Roy

Milton Roy PRIMEROYAL Manuale utente