VIA Technologies VIPRO VP7710 Manuale utente
VIPRO VP7710
VIPRO VP7710VIPRO VP7710
VIPRO VP7710
U
UU
U
SER
SERSER
SER
’
’’
’
S
S S
S
M
MM
M
ANUAL
ANUALANUAL
ANUAL
Version 1.06
November 24, 200
Copyright
CopyrightCopyright
Copyright
Copyright © 200 VIA Technologies Incorporated. All rights reserved.
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language, in any form or by any means, electronic, mechanical, magnetic, optical,
chemical, manual or otherwise without the prior written permission of VIA Technologies, Incorporated.
Trademarks
TrademarksTrademarks
Trademarks
All trademarks are the property of their respective holders.
Macrovision
MacrovisionMacrovision
Macrovision
Apparatus Claims of U.S. Patent Nos. 4,631,603; 4, 19,09 ; 4,907,093; 5,315,44 ; 6,516,132 licensed for
limited viewing uses only. This product incorporates copyright protection technology that is protected by
certain U.S. patents and other intellectual property rights owned by Macrovision and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
Disclaimer
DisclaimerDisclaimer
Disclaimer
No license is granted, implied or otherwise, under any patent or patent rights of VIA Technologies. VIA
Technologies makes no warranties, implied or otherwise, in regard to this document and to the products
described in this document. The information provided in this document is believed to be accurate and
reliable as of the publication date of this document. However, VIA Technologies assumes no responsibility
for the use or misuse of the information in this document and for any patent infringements that may arise
from the use of this document. The information and product specifications within this document are subject
to change at any time, without notice and without obligation to notify any person of such change.
FCC
FCCFCC
FCC-
--
-B
BB
B Radio Frequency Interference Statement
Radio Frequency Interference Statement Radio Frequency Interference Statement
Radio Frequency Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Notice 1
Notice 1Notice 1
Notice 1
The changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
Notice 2
Notice 2Notice 2
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission
limits.
S
SS
S
AFETY
AFETY AFETY
AFETY
I
II
I
NSTRUCTIONS
NSTRUCTIONSNSTRUCTIONS
NSTRUCTIONS
Lay this equipment on a reliable flat surface before setting it up.
Always unplug the power cord before inserting any add-on card or module.
Make sure the voltage of the power source and adjust properly 110/220V
before connecting the equipment to the power inlet.
Place the power cord in such a way that people cannot step on it. Do not
place anything over the power cord.
Wear a grounded wrist strap when installing components.
Hold components by the edges to prevent damage to the components.
Do not flex or stress the components.
Use the correct screws with the correct threading. Do not over tighten
screws.
If any of the following situations arises, get the equipment checked by a
service personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment has not worked well or you cannot get it work
according to User's Manual.
The equipment has dropped and damaged.
If the equipment has obvious sign of breakage.
The openings on the enclosure are for air convection hence protects the
equipment from overheating. Do not cover the openings.
Never pour any liquid into the opening. Liquid can cause damage or
electrical shock.
Keep this equipment away from humidity.
Do not leave this equipment in an environment unconditioned or in a
storage temperature above 60
o
C (140
o
F). The equipment may be damaged.
Keep the original packaging and anti-static bag in case the unit has to be
returned.
Do not attempt to power-on the system if there is damage to any of its
components.
Caution
CautionCaution
Caution:
::
:
Only use the appropriate battery specified for this product.
Do not reuse, recharge, or reheat an old battery.
Do not attempt to force open the battery.
Do not discard used batteries with regular trash.
Discard used batteries according to local regulations.
P
PP
P
ACKAGE
ACKAGE ACKAGE
ACKAGE
C
CC
C
HECK
HECK HECK
HECK
L
LL
L
IST
ISTIST
IST
VIPRO VP7710 system unit x 1
Driver Utility
SATA data cable x 1
IDE data cable x 1
Power Cable, DIN-jack to DC-plug x 1
Panel mounting plate
T
TT
T
ABLE OF
ABLE OF ABLE OF
ABLE OF
C
CC
C
ONTENTS
ONTENTSONTENTS
ONTENTS
VIPRO VP7710 Overview................................................................................................ 1
Specifications.................................................................................................................2
Processor System....................................................................................................2
Graphics ......................................................................................................................3
LCD Display ...............................................................................................................3
Touch Screen ............................................................................................................3
Ethernet.......................................................................................................................4
Audio............................................................................................................................4
Serial.............................................................................................................................4
Storage........................................................................................................................4
System Indicator......................................................................................................5
Watchdog Timer......................................................................................................5
System I/O .................................................................................................................5
Power Supply............................................................................................................6
Environmental Specification...............................................................................7
Mechanical.................................................................................................................
Layout ...............................................................................................................................9
Installation..........................................................................................................................11
Removing the back plate....................................................................................... 11
Installing Memory..................................................................................................... 12
Installing the Hard Drive ........................................................................................ 14
Installing the CF Memory ...................................................................................... 16
Installing the WLAN Module (optional)........................................................... 1
Mounting Options ..........................................................................................................21
VESA Mounting Holes............................................................................................. 21
Desktop Stand (optional)....................................................................................... 22
Panel Mounting Kit................................................................................................... 23
Wall Mounting Kit (optional)................................................................................ 26
VIPRO VP7710 BIOS SETUP.........................................................................................27
Main Menu................................................................................................................... 27
Standard CMOS Features ...................................................................................... 29
IDE Drives ..................................................................................................................... 30
Advanced BIOS Features........................................................................................ 31
CPU Feature................................................................................................................. 34
Hard Disk Boot Priority........................................................................................... 35
Advanced Chipset Features .................................................................................. 36
AGP & P2P Bridge Control.................................................................................... 37
CPU & PCI Bus Control ........................................................................................... 39
TV Output Connector.............................................................................................. 40
Integrated Peripherals............................................................................................. 41
VIA OnChip PCI Device ........................................................................................... 42
USB Device Setting................................................................................................... 43
Power Management Setup ................................................................................... 45
Wakeup Event Detect.............................................................................................. 4
PnP/PCI Configurations.......................................................................................... 50
IRQ Resources ............................................................................................................ 52
PC Health Status........................................................................................................ 53
Frequency / Voltage Control................................................................................ 54
DRAM Clock/Drive Control ................................................................................... 55
Load Optimized Defaults ....................................................................................... 5
Set Supervisor / User Password .......................................................................... 59
Save & Exit Setup...................................................................................................... 60
Exit Without Saving.................................................................................................. 61
Appendix A ........................................................................................................................62
Introduction of VIPRO VP7710 External I/O Connectors ......................... 63
VIPRO VP7710 Bottom System External I/O Connectors......................... 64
Power Input Connector ..................................................................................... 64
Power ON/OFF Switch Button........................................................................ 64
Audio Connector.................................................................................................. 65
5V/12V switch for COM 2 and COM4 ......................................................... 65
RS-422/4 5 switch for COM1......................................................................... 65
LED indicators........................................................................................................ 65
COM2 and COM4 Connector ......................................................................... 66
COM1 Connector................................................................................................. 67
VGA Connector..................................................................................................... 6
VIPRO VP7710 Side System External I/O connectors ................................ 69
PS/2 Keyboard and PS/2 Mouse Connector............................................. 69
USB Connectors.................................................................................................... 70
Ethernet Connector (LAN)................................................................................ 71
VIPRO VP7710 User’s Manual
1
11
1
VIPRO VP7710
VIPRO VP7710VIPRO VP7710
VIPRO VP7710
Overview
OverviewOverview
Overview
The VIPRO VP7710 Fanless Panel PC is an embedded panel computer
with a 10.4” TFT LCD and resistive touch screen. The VIPRO VP7710 has
a NanoBGA2 central processor (VIA Eden ULV 1.6 GHz or C7 1.0 GHz) —
making it an ideal solution for applications that require low power
consumption, fanless and noise-free operation, and multiple IO ports.
It accepts a wide range of DC power input voltages (from DC 7V – 30V).
The VIPRO VP7710 Panel PC is equipped with one DDR2 533 MHz
SODIMM socket that supports up to 1 GB of memory, three COM ports
(one RS-422/4 5 and two RS-232 with a 5V/12V selector), one Gigabit
LAN, and two USB 2.0 ports.
The VIPRO VP7710 has an external VGA port that enables dual
independent displays and high definition audio ports that makes it good
for multimedia applications. Storage can be integrated into its internal
Compact Flash socket and 2.5" internal HDD drive bay. It also includes a
variety of mounting options that make it a flexible system to install.
These features make the VIPRO VP7710 Fanless Panel PC suitable for a
wide variety of embedded, multimedia, and industrial HMI (Human
Machine Interface) applications including factory automation systems,
precision machinery, production process control, terminal information
systems, entertainment management systems, and car park automation
systems…etc. The VIPRO VP7710 is a reliable, cost-effective solution that
can shorten your application development time.
VIPRO VP7710 User’s Manual
2
22
2
Specifications
SpecificationsSpecifications
Specifications
Processor System
Processor
ProcessorProcessor
Processor
•VIA Eden ULV 1.6 GHz (for VP-7710-R1E16A1)
o00 MHz FSB
o12 KB L2 cache
oNanoBGA2 package
•VIA C7® 1.0 GHz (for VP-7710-R1C10A1)
o400 MHz FSB
o12 KB L2 cache
oNanoBGA2 package
Chipset
ChipsetChipset
Chipset
•VIA CX700M2 Unified Digital IGP chipset
BIOS
BIOSBIOS
BIOS
•Award 4-Mbit Flash BIOS
System Power Management
System Power ManagementSystem Power Management
System Power Management
•Timer Power On
•ACPI Support
System
System System
System Memory
MemoryMemory
Memory
•1 x 200-pin DDR2 533 SDRAM SODIMM socket
•Supports up to 1 GB of DDR2 SDRAM
VIPRO VP7710 User’s Manual
3
33
3
Graphics
Controller
ControllerController
Controller
•Integrated VIA UniChrome™ Pro II 3D/2D AGP graphics with
MPEG-2/4 and WMV9 video decoding acceleration
Display Memory
Display MemoryDisplay Memory
Display Memory
•Optimized Shared Memory Architecture, supports up to 12
MB frame buffer using system memory
LCD Display
LCD Type
LCD TypeLCD Type
LCD Type
•10.4” Color TFT LCD panel
Resolution/Color
Resolution/ColorResolution/Color
Resolution/Color
•Up to 00 X 600 @ 262K
Pixel pitch (mm)
Pixel pitch (mm)Pixel pitch (mm)
Pixel pitch (mm)
•0.264 x 0.264
Viewing angle
Viewing angleViewing angle
Viewing angle
•70° (right), 70° (left), 50° (up) and 60° (down)
Luminance
LuminanceLuminance
Luminance
•230 cd/m2
Backlight MTBF
Backlight MTBFBacklight MTBF
Backlight MTBF
•30,000 hours (typical)
Touch Screen
Type
TypeType
Type
•Analog Resistive, continuous resolution
(up to 1 million touches)
Light Transmission
Light TransmissionLight Transmission
Light Transmission
•2.5% (Typical)
Controller
ControllerController
Controller
•USB interface
VIPRO VP7710 User’s Manual
4
44
4
Ethernet
Controller
ControllerController
Controller
•VIA VT6122 Gigabit Ethernet
Interface
InterfaceInterface
Interface
•Supports one RJ45 connector
•Supports Wake On LAN (WOL)
•Supports Pre-boot Execution Environment (PXE)
Audio
Controller
ControllerController
Controller
•VIA VT170 A High Definition Audio Codec
Interface
InterfaceInterface
Interface
•Supports Line-in, Speaker-out, and Mic-in connectors
Serial
USB
USBUSB
USB
•2 x USB ports, USB 2.0 compliant
Serial Ports
Serial PortsSerial Ports
Serial Ports
•3 x COM ports consisting of 2 x RS-232 and 1 x RS-422/4 5
•5V/12V selectable
Storage
HDD
HDDHDD
HDD
•1 x 2.5 inch drive bay
Compact Flash
Compact FlashCompact Flash
Compact Flash
•1 x Type I socket
Altri manuali per VIPRO VP7710
1
Indice
Altri manuali VIA Technologies Pannello touch
VIA Technologies
VIA Technologies VIPRO VP7710 Manuale utente
VIA Technologies
VIA Technologies VIPRO VP7910 Manuale utente
VIA Technologies
VIA Technologies VTS-8588 Manuale utente
VIA Technologies
VIA Technologies Viasis 3003 Manuale utente
VIA Technologies
VIA Technologies VIPRO VP7815 Manuale utente
VIA Technologies
VIA Technologies VIPRO VP7806 Manuale utente
