Notice
Every effort was made to ensure that the information in this manual was accurate at the time of printing. However, information
is subject to change without notice, and Viavi reserves the right to provide an addendum to this manual with information not
available at the time that this manual was created.
Copyright
© Copyright 2016 Viavi Solutions Inc. All rights reserved. Viavi and the Viavi logo are trademarks of Viavi Solutions Inc. (“Viavi”). All
other trademarks and registered trademarks are the property of their respective owners. No part of this guide may be reproduced
or transmitted, electronically or otherwise, without written permission of the publisher.
Copyright release
Reproduction and distribution of this guide is authorized for Government purposes only.
Terms and conditions
Specifications, terms, and conditions are subject to change without notice. The provision of hardware, services, and/or software
are subject to Viavi standard terms and conditions, available at www.viavisolutions.com/terms.
Specifications, terms, and conditions are subject to change without notice. All trademarks and registered trademarks are the
property of their respective companies.
Federal Communications Commission (FCC) Notice
This product was tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this product in a
residential area is likely to cause harmful interference, in which case you will be required to correct the interference at your own
expense.
The authority to operate this product is conditioned by the requirements that no modifications be made to the equipment unless
the changes or modifications are expressly approved by Viavi.
Laser compliance
This device is a class 1 laser product.
Industry Canada Requirements
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
WEEE and Battery Directive Compliance
Viavi has established processes in compliance with the Waste Electrical and Electronic Equipment (WEEE) Directive, 2002/96/EC,
and the Battery Directive, 2006/66/EC.
This product, and the batteries used to power the product, should not be disposed of as unsorted municipal waste and should be
collected separately and disposed of according to your national regulations. In the European Union, all equipment and batteries
purchased from Viavi after 2005-08-13 can be returned for disposal at the end of its useful life. Viavi will ensure that all waste
equipment and batteries returned are reused, recycled, or disposed of in an environmentally friendly manner, and in compliance
with all applicable national and international waste legislation.
It is the responsibility of the equipment owner to return equipment and batteries to Viavi for appropriate disposal. If the
equipment or battery was imported by a reseller whose name or logo is marked on the equipment or battery, then the owner
should return the equipment or battery directly to the reseller.
Instructions for returning waste equipment and batteries to Viavi can be found in the Environmental section of Viavi web site
at http://www.viavisolutions.com. If you have questions concerning disposal of your equipment or batteries, contact Viavi WEEE
Program Management team at WEEE.EMEA@viavisolutions.com.
Technical Support
North America 1.844.GO VIAVI / 1.844.468.4284
Latin America +52 55 5543 6644
EMEA +49 7121 862273
APAC +1 512 201 6534
All Other Regions viavisolutions.com/contacts
email customer.care@viavisolutions.com
Support hours are 7:00 A.M to 7:00 P.M. (local time for each office).
