Vicon VM615-4 Manuale utente
Installation &
Operation Manual
XX108
MODEL VM615-4
HIGH-RESOLUTION COLOR MONITOR
Copyright © 2002 Vicon Industries Inc. All rights reserved.
Product specifications subject to change without notice.
Vicon and its logo are registered trademarks of Vicon Industries Inc.
VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788
TEL: 631-952-CCTV (2288) FAX: 631-951-CCTV (2288) TOLL FREE: 800-645-9116
24-Hour Technical Support: 800-34-VICON (800-348-4266)
UK: 44/(0) 1489-566300 INFOFAX: 800-287-1207 WEB: www.vicon-cctv.com
Vicon part number 8009-8108-00-00 Rev 302 Section 3
0) VM615-4-cover 4/9/02 1:33 PM Page 2
1) VM615-4 E 4/9/02 1:33 PM Page 1
Graphic Symbol Explanation
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the presence
of uninsulated ‘dangerous voltage’ within the product’s
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Warning - To Prevent Fire or Shock Hazard, Do Not
Expose This Monitor To Rain or Moisture.
ii
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
1) VM615-4 E 4/9/02 1:33 PM Page ii
IMPORTANT SAFEGUARDS
Caution
Power source is indicated on the rear of the set. It contains high-voltage parts. If
you remove the cover, it may cause fire or electric shock. Do not remove the
cover by yourself. (Control switches are at the front of the monitor.)
1. Read Instructions : All the safety and operating instructions should be
read before the appliance is operated.
2. Retain Instructions : The safety and operating instructions should be
retained for future reference.
3. Heed Warnings : All warnings on the monitor and in the operating
instructions should be adhered to.
4. Follow Instructions : All operating and use instructions should be
followed.
5. Cleaning : Unplug this monitor from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
Exception. A monitor that is meant for uninterrupted service and that
for some specific reason, such as the possibility of the loss of an
authorization code for a CATV converter, is not intended to be
unplugged by the user for cleaning or any other purpose, may exclude
the reference to unplugging the monitor in the cleaning description
otherwise required in Item 5.
6. Attachments : Do not use attachments not recommended by VICON as
they may cause hazards.
7. Water and Moisture : Do not use this monitor near water, for example,
near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool and the like.
iii
1) VM615-4 E 4/9/02 1:33 PM Page iii
8. Accessories : Do not place this monitor on an unstable cart, stand,
tripod, bracket, or table. The monitor may fall, causing serious injury to
a child or adult, and serious damage to the appliance. Use only with a
cart, stand, tripod, bracket, or table recommended by VICON, or sold
with the monitor. Any mounting of the monitor should follow VICON’s
instructions, and should use a mounting accessory recommended by
VICON.
9. Ventilation : Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the monitor and to protect
it from overheating, and these openings should never be blocked by
placing the monitor on a bed, sofa, rug, or other similar surface. This
monitor should never be placed near or over a radiator or heat register.
This monitor should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or VICON’s
instructions have been adhered to.
10. Power Sources : This monitor should be operated only from the type of
power source indicated on the label. If you are not sure of the type of
power supply to your installation site, consult your VICON dealer or
local power company.
11. Grounding or Polarization : For monitors equipped with a 3-wire
grounding-type plug having a third (grounding) pin, this plug will only
fit into a grounding type power outlet. This is a safety feature. If you are
unable to insert the plug into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the
grounding-type plug.
12. Power : Cord Protection-Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the monitor.
iv
1) VM615-4 E 4/9/02 1:33 PM Page iv
13. Lightning : For added protection for this monitor during a lightning
storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the cable system. This will
prevent damage to the monitor due to lightning and power-line surges.
14. Overloading : Do not overload wall outlets and extension cords as this
can result in a risk of fire of electric shock.
15. Object and Liquid Entry : Never push objects of any kind into this
monitor through openings as they may touch dangerous voltage points
or short-out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the monitor.
16. Servicing : Do not attempt to service this monitor yourself as opening
or removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
17. Damage Requiring Service : Unplug this monitor from the wall outlet
and refer servicing to qualified service personnel under the following
conditions.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the monitor.
c. If the monitor has been exposed to rain or water.
d. If the monitor does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a
qualified technician to restore the monitor to its normal operation.
e. If the monitor has been dropped or the cabinet has been damaged.
f. When the monitor exhibits a distinct change in performance-this
indicates a need for service.
v
1) VM615-4 E 4/9/02 1:33 PM Page v
18. Replacement Parts : When replacement parts are required, be sure the
service technician has used replacement parts specified by VICON or
have the same characteristics as the original parts.
Unauthorized substitutions may result in fire, electric shock or other
hazards.
19. Safety Check : Upon completion of any service or repairs to this
monitor, ask the service technician to preform safety checks to
determine that the monitor is in proper operating condition.
FCC & ICES Information
Warning
This equipment has been tested and found to comply the limits for a class A
digital device, pursuant to part 15 of the FCC Rules and ICES-003 of
Industry Canada. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial
environment. This equipment generate, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct
the interference at his own expense.
User-Installer Caution
Your authority to operate this FCC verified equipment could be voided if
you make changes or modifications not expressly approved by the party
responsible for compliance to part 15 of the FCC Rules.
vi
1) VM615-4 E 4/9/02 1:33 PM Page vi
General
Scope
The information in this instruction manual covers the installation and
operation of the VM615-4 Color Monitor.
These units should be installed using approved materials and wiring
practices in accordance with the National Electrical Code and applicable
local wiring ordinances.
Introduction
The VM615-4 Color Monitor, having a resolution of more than 650 lines at
center, produces high quality pictures on a 15” (measured diagonally) screen.
Designed primarily for industrial applications this monitor accepts standard
NTSC/PAL color input signals.
Operating controls (BRIGHT, CONTRAST, COLOR, TINT, SHARP,
VOLUME) are located on the front panel. A power switch is also located on
the front panel.
A regulated power supply maintains excellent performance during
fluctuations in line voltage.
The VM615-4 Color Monitor is housed in a metallic dark-gray color cabinet.
vii
1) VM615-4 E 4/9/02 1:33 PM Page vii
1) VM615-4 E 4/9/02 1:33 PM Page viii
Before operating the unit, please read this manual thoroughly,
and retain it for future reference.
1) VM615-4 E 4/9/02 1:33 PM Page e-1
Indice
Lingue:
Altri manuali Vicon Monitor
Vicon
Vicon VM5154 Manuale utente
Vicon
Vicon VM-642LCD-2 Manuale utente
Vicon
Vicon VM-6215LED Manuale utente
Vicon
Vicon VM617 Manuale utente
Vicon
Vicon VM-623LED-1 Manuale utente
Vicon
Vicon VM-642LED Manuale utente
Vicon
Vicon VM-620LCD Manuale utente
Vicon
Vicon VM6093 Manuale utente
Vicon
Vicon VM520 Guida utente
Vicon
Vicon VM-717LCD Manuale utente
Vicon
Vicon VM621-4 Manuale utente
Vicon
Vicon VM615 Guida utente
Vicon
Vicon VM-610LCD Istruzioni operative
Vicon
Vicon VM614-2 Manuale utente
Vicon
Vicon VM-622LCD Manuale utente
Vicon
Vicon VM-624LED Manuale utente
Vicon
Vicon VM-619LCD Guida per l'amministratore
Vicon
Vicon VM621-5 Manuale utente
Vicon
Vicon VM-632LCD-1 Manuale utente
