Vicoustic VicFix Frame 3x1 Guida di riferimento
VicFix Frame 3x1
INSTALLATION PROCEDURES
Required Apparatus:
VicFix Frame 3x1 Items:
2 x Wood Part (160cm)
6 x Wood Part (40cm)
4 x Triangular Part
6 x Metal Spike Part
Accessories
12 x Screws (3x20 Philips Head)
8 x Nails
Bill of Materials
Metal Spike Part
Triangular Part
Screws
Nails
Wood Part (40cm)
Wood Part (160cm)
VicFix Frame 3x1 (Vertical Assembly)
INSTALLATION PROCEDURES
Hammer the two nails per each triangular part. Then, fit
two screws (not included) onto your wall and use these
triangular parts to hold your frame in place. Make sure
the two screws are correctly levelled on your wall.
Step 3 (Vertical Assembly)
Push two spike parts on three different wooden 40cm pieces.
Step 1 (Vertical Assembly)
Push your Vicoustic acoustic panels into the
spiked pieces at a 45º angle for the best fit.
Step 2 (Vertical Assembly)
Fit in all screws as shown on the pictures.
Step 4 (Vertical Assembly)
VicFix Frame 3x1
INSTALLATION PROCEDURES
Push the six spiked parts on one of the wooden
160cm pieces.
Step 1 (Horizontal Assembly)
Hammer the two nails per each triangular
part. Then, fit two to three screws (not
included) on your wall and use these
triangular parts to hold your frame in
place.
Step 3 (Horizontal Assembly)
Push your Vicoustic acoustic panels into the
spiked pieces at a 45º angle for the best fit.
Step 4 (Horizontal Assembly)
Step 2 (Horizontal Assembly)
Fit in all screws as shown on the pictures.
Indice
Altri manuali Vicoustic Rack e supporto
