Victesse frontengine Manuale utente
Victesse
Frontengine
User
Manual
Table of contents
Congratulations on the purchase of your new Victesse .................................................................................... 2
Use of the battery ................................................................................................................................................... 3
Operating computer and reading display............................................................................................................ 4
Central display with control on the left side of the handlebar ......................................................................... 8
Error code .............................................................................................................................................................. 11
Lighting................................................................................................................................................................... 12
Gears ...................................................................................................................................................................... 14
Adjusting the handlebar ...................................................................................................................................... 15
Adjusting the saddle............................................................................................................................................. 17
Maintenance/cleaning.......................................................................................................................................... 18
English- 1
Victesse
Congratulations on the purchase of your new Victesse
Thank you and congratulations for choosing a Victesse bike! Victesse bicycles are built with the greatest
care and are only assembled with the best parts. We also offer at-home service, so we feel certain you
will have a wonderful experience with your Victesse bike.
This guide will help you get acquainted with all the features of your Victesse bike and includes tips to
help you keep your bike in perfect condition.
There is one tip we would like to share with you right away, as it has been shown to make e-bikes last
longer: always start off in a low assist mode and low gear (i.e. a gear in which you pedal faster). As your
speed increases, you can shift to a higher gear and higher assist mode. This provides a gentle, gradual
start. You will ride more safely and smoothly, and this minimizes stress on the battery and motor. This
will help to increase the life of your bike.
Happy cycling!
Victesse
English- 2
Use of the battery
> Carefully insert the battery into the battery slot
> Turn on the battery with the key: turn the key to the horizontal “on” position
- Always remove the key from the battery during use, because the key is not locked in the “on” position
- The battery itself is locked in the “on” position
Removing battery from the bicycle
> Turn the key to “off” to turn off the battery
> To release the battery lock, with the key in the “push” position push the key in gently and turn it to
“unlock”. Remove the key from the lock. You can now remove the battery from the battery slot by
pulling the battery out the back of the carrier rack.
Fig. 1: Battery
Placing battery in the bicycle
You can slide the battery into the battery slot under the carrier rack. As soon as you hear a click the
battery is installed properly.
Charging
The battery must be charged with the supplied charger. The battery can remain in the bicycle while
charging, but it can also be taken out of the bicycle. Charging is done with regular household power. In
some cases you will have to turn on the battery before the battery can be charged. The charging port is
located under the cover (shown in red in figure 2).
Fig. 2: Battery port (under cover)
It usually takes about 4-6 hours to fully charge the battery from 0% to 100%. Sometimes it can take
longer, such as when the battery is new or the place where it is being charged is below 15 °C (59 °F).
Room temperature (around 21 °C/70 °F) is a good ambient temperature for the battery during charging.
IGNITION
ON
OFF
PUSH UNLOCK
English- 3
Victesse
There is a LED on the charger. The light is red when the battery is charging and changes to green when
the battery is fully charged. The charger then stops charging, so there is no need to immediately unplug
the charger.
Note: When the 4 LEDs on the battery are lit, this does not necessarily mean that the battery is fully
charged. You can only be sure the battery is fully charged once the light on the charger is
green..
It is advisable to run the battery down to the 5 to 10% charge level and then fully recharge it the
first 3 times.
About the battery
> The 4 LEDs indicate the approximate battery status. Each LED represents about 25% of the full
battery charge.
- If only one LED is on, it is recommended that you charge the battery.
- The 5-block display on the handlebar shows the status with more precision.
> Do not place the battery in direct sunlight.
> Charge the battery every 2 months when not in use.
> The battery can be charged at any time. It does not harm the battery to charge it when it is at, say,
50% or 75%. We do recommend, however, that the battery be discharged almost completely and
then fully recharged every now and then.
> Do not drain the battery completely.
> In very cold temperatures the battery will operate less efficiently than at temperatures of around
10-20 °C (50-68 °F), and this may reduce the action radius by as much as 30%. This also applies to
charging: the charging process will take longer.
Operating computer and reading display
There are 2 displays available for the Victesse models with front-wheel motor: a display with integrated
control on the left side of the handlebar, and a centrally located display on the handlebar with control
on the left side of the handlebar.
Display on the left side of the handlebar
Once the battery is turned on, the computer can be turned on with the Mode Mbutton on the control
panel by holding it for 2-3 seconds.
Turning on
1. Lock the battery and turn on the electrical system by turning the key all the way to the right (“on”).
2. Turn on the display by pressing the Mode Mbutton for 3 seconds.
3. Use the speed adjuster to select the desired amount of pedal assistance by pressing the MINUS -
and PLUS +buttons.
4. As soon as you pedal, the assist will turn on.
5. You interrupt the assist by stopping pedaling or squeezing the brakes.
Victesse
English- 4
What the screen shows
Fig. 3: Display
BMS (battery monitoring system)
> Battery level – An outline in the shape of a battery, filled with blocks. Each block inside the outline
represents approximately 15% of the battery’s capacity. When the battery is almost discharged,
the battery-shaped outline will blink.
> Current voltage output
Speedometer
Current speed in km/h (or mph).
Assist mode (PAS [pedal assistance])
Assist mode (PAS [pedal assistance])
Assist mode – 1 to 9
Switch to a higher or lower assist mode with the MINUS -and PLUS +buttons.
English- 5
Victesse
Walk assist
When Walk assist is active, the “6 km” icon is shown. This is activated by pressing the MINUS -
button for a few seconds. When you release the MINUS -button again, the self-drive function
stops.
Important! Never use the self-drive function while riding the bike!
Statistics
This section shows a number of things. These can be consulted by briefly pressing MODE M.
> ODO: Odometer – The total distance traveled (cannot be reset to 0).
> Trip 1: Measures the distance you have biked so far. This is reset automatically at 500 km, but can
be reset manually in menu 1).
> Trip 2: Shows the last traveled distance from the previous session for 30 seconds. This is reset
automatically and begins measuring the current session after the reset.
> Time: Measures how long you have been biking. This is reset automatically when the display is
turned off.
These items can also be displayed as a slide show. This is active when the icon is displayed.
Additional settings
Press and hold MINUS -and PLUS +buttons at the same time for 3 seconds. The display now
shows the option menu.
The following settings are available:
1. Reset trip meter
2. Set maximum speed
3. Set wheel diameter
4. Set km/h or mph
5. Setting riding mode
Pressing the MODE Mbutton takes you to the next setting. Pressing the MINUS -and PLUS +
buttons at the same time again closes the settings menu.
Victesse
English- 6
1: Reset trip meter
Press the MINUS -button to reset the trip
meter to zero.
2: Set maximum speed
Reduce the maximum speed by pressing the
MINUS -button. Increase by pressing the
PLUS +button.
Dutch law states that an e-bike may only provide assistance up to 25 km/h. If you ride the bike above
this speed, the assistance stops. You can continue biking, but you will no longer have any assistance.
At speeds above 25 km/h the bike does not resist your pedaling to prevent you from biking above
25 km/h. Because a freewheel motor is installed in this model, it then feels like you are riding a bike
without pedal assist.
Note: This menu is only intended for reducing the maximum speed and does not allow you to
increase the maximum speed. If you try to increase the maximum speed of the e-bike, you do
so at your own risk and responsibility.
3: Set wheel diameter
Adjust the diameter of the wheel with the
MINUS -and PLUS +buttons.
Note: Standard setting: 700C. This must
not be changed, because otherwise
the computer will no longer function
properly.
4: Instellen km/h of mp/h
Met de MIN -en PLUS +knop kiest u voor
kilometer per uur of mijl per uur.
4: Set km/h or mph
Use the MINUS -and PLUS +buttons to
choose kilometers per hour or miles per hour.
English- 7
Victesse
5: Set riding mode
Use the MINUS -or PLUS +buttons to select the
desired riding mode (3 choices: 1 = eco, 2 = normal,
3 = power).
If you want to turn off the computer and/or pedal assist:
Press the MODE Mbutton on the control panel on the left side of the handlebar for 2 seconds. As soon
as the screen is off, the bike no longer provides pedal assist.
If you want the screen on, without pedal assist, then set the assist mode to 0. The computer will then
continue to measure distances and speeds as usual.
Note: The display automatically turns off after 5 minutes at a speed of 0 km/h.
Central display with control on the left side of the handlebar
Once the battery is turned on, the computer can be turned on with the On/off button on the control panel.
Fig. 3: Control panel + display
Victesse
English- 8
What does the screen show?
1. Type of assist
a. Power
b. Normal
c. Eco
2. Speed/backlight
a. Backlight (icon shown when enabled)
b. Speedometer (km/h by default)
c. Walk assist (icon shown when enabled)
3. Assistance/Error info/Settings
a. Assist mode
b. Error code
c. Setting number
4. Kilometer counters
a. Total distance
b. Trip meters
c. Timer (not configured)
5. BMS (battery monitoring system)
a. Battery level – An outline in the shape of a battery, filled with blocks. Each block represents
about 20% of the battery’s capacity. When the battery is almost discharged, the battery icon
on the screen will blink.
b. Voltmeter
Setting pedal assist
The assist mode – 1 to 9: minimum assistance to maximum assistance. You can
switch to a higher or lower assist mode with the + and – buttons.
Fig. 4: Plus/Minus buttons
Lighting setting
Press the on/off button one time to turn on. Press the on/off button again to turn off. When the
lighting is on, the display backlight is also on. When the lighting is active, the lighting icon is shown.
Fig. 5: Button for turning on lighting and backlight
English- 9
Victesse
Indice
