Victron energy CCGX Manuale utente

2020-11-10 03:20 1/6 GX - Fischer Panda generators

Victron Energy - https://www.victronenergy.com/live/

CCGX & Fischer Panda generators

Beginning with CCGX v2.07 it became possible to read data from your Fischer Panda generator. The

generator needs to be connected to the VE.Can port of the CCGX, which requires a Fischer Panda SAE

J1939 module.

Requirements

CCGX or Venus GX

Fischer Panda generator, xControl or iGenerator

Fischer Panda SAE J1939 CAN module (part number 0006107)

Fischer Panda FP-Bus to VE.Can adapter (part number 0023441)

Fischer Panda Firmware requirements:

iControl (for the iGenerator): v2.17 minimum

iControl panel: no minimum requirement

xControl (for the constant speed generators): 4V38 minimum

xContr panel: 4V29

Fischer Panda SAE J1939 CAN module: 2V05

Fischer Panda three phase module: 4V0b

Connecting

xControl

The schematic below shows how to connect a Fischer Panda xControl generator.

Last update: 2018-03-20 13:28 ccgx:ﬁscher_panda https://www.victronenergy.com/live/ccgx:ﬁscher_panda?rev=1521548908

https://www.victronenergy.com/live/ Printed on 2020-11-10 03:20

iControl

The schematic below shows how to connect a Fischer Panda iControl generator.

2020-11-10 03:20 3/6 GX - Fischer Panda generators

Victron Energy - https://www.victronenergy.com/live/

When all wiring is complete and the setup has been correctly carried-out, the Fischer Panda will show

up in the device list:

Entering the Fischer Panda device on the menu reveals a page like this:

Last update: 2018-03-20 13:28 ccgx:ﬁscher_panda https://www.victronenergy.com/live/ccgx:ﬁscher_panda?rev=1521548908

https://www.victronenergy.com/live/ Printed on 2020-11-10 03:20

Notice that it features an on/oﬀ switch as well as displaying status information, and the main AC

parameters: voltage, current and power.

Engine temperature, RPM and additional information are all available by entering the Engine sub

menu item.

Generator start/stop

In addition to the manual start/stop and monitoring, there is also an automatic start/stop feature. This

has the same comprehensive range of options as the Generator start/stop feature associated with the

CCGX relay. See GX - Generator auto start/stop for the manual.

2020-11-10 03:20 5/6 GX - Fischer Panda generators

Victron Energy - https://www.victronenergy.com/live/

Maintenance

Whenever performing maintenance on the generator, be sure to stop the generator from the Fischer

Panda control panel. This will disable the Fischer Panda autostart feature, and ensure that the

generator cannot be remotely started - by a CCGX, for example.

When the maintenance is completed, make sure you enable the autostart feature again. You can do

this on the Fischer Panda control panel in the menu generator → autostart → turn on / off.

Troubleshooting

I've set the mode of the genset to 'On' or 'Auto start/stop' but the generator is not

starting/running.

Make sure the Fischer Panda autostart feature is on, this allows the CCGX control the remote on/oﬀ of

the genset. You can ﬁnd this option on the control panel in the menu generator → autostart →

turn on / off.

If you're manually trying to start the genset, a toast message appears with the text AutoStart

functionality is currently disabled, enable it on the genset panel in order

to start the genset from this menu.

If the generator auto start/stop is enabled, it will show error #1 Remote switch control

Last update: 2018-03-20 13:28 ccgx:ﬁscher_panda https://www.victronenergy.com/live/ccgx:ﬁscher_panda?rev=1521548908

https://www.victronenergy.com/live/ Printed on 2020-11-10 03:20

disabled on the Auto start/stop page.

Disqus

View the discussion thread.

From:

https://www.victronenergy.com/live/ - Victron Energy

Permanent link:

https://www.victronenergy.com/live/ccgx:ﬁscher_panda?rev=1521548908

Last update: 2018-03-20 13:28

Altri manuali per CCGX

Indice

Altri manuali Victron energy Pannello di controllo

Victron energy

Victron energy Color Control GX Manuale utente

Victron energy

Victron energy Skylla-i Control GX Manuale utente

Victron energy

Victron energy Digital Multi Control Manuale utente

Victron energy

Victron energy Color Control GX Manuale utente

Victron energy

Victron energy Blue Power BMV-602 Manuale utente

Victron energy

Victron energy VE.Net Blue Power Panel Manuale utente

Victron energy

Victron energy VE.Bus Manuale utente

Victron energy

Victron energy Color Control GX Manuale utente

Manuali Pannello di controllo popolari di altre marche

RDZ

RDZ PC-HRX Manuale utente

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuale tecnico

Efka

Efka Variocontrol V810 Manuale utente

Cebora

Cebora 208-10 Manuale utente

AMX

AMX AutoPatch CP-15 Manuale utente

Satel

Satel CA-6 KLED-S Manuale utente

Evolution

Evolution IQ plus 800 Manuale utente

Fagor

Fagor 8040 TCO CNC Manuale utente

Trane

Trane ComfortLink II XL950 Control Manuale utente

AKO

AKO PROCool AKO-17635-2 Manuale utente

ABB

ABB 6136/30M-101 Manuale utente

Telikou

Telikou BK-603 Belt Pack Manuale utente

Mapei

Mapei Mapeheat Thermo Touch Manuale utente

Bosch

Bosch D9412GV4 Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuale utente

Sminn

Sminn BOX L VF1L EI Manuale utente

Balboa

Balboa TP600 Manuale utente

Nice

Nice HSCU1 Specifiche tecniche