VideoSystemer VSVM-103 Manuale utente
- 1 -
Safety Instructions
- 2 -
◆ FOREWORD
■Safety Instructions ………………………………………………... 1
◆ CONNECTING AND PREPARING YOUR TV
■ Viewing the Control Panel ………………………………. 3
■ Viewing the Remote Control ……………………………. 7
■ Becoming Familiar with the Remote Control …………… 7
◆ SETING YOUR TV
■ Viewing the Display mode ………………………………. 8
■ Setting the Picture ………………………………………… 9
■ Storing Channels Automatically ………………………… 10
■ Storing Channels Manually ………………………………… 11
■ Fine Tuning Channel Reception …………………………. 12
■ Swapping and Deleting Stored Channels ………………. .13
■ Setting the Sound …………………………………………… 14
■ Setting the System ………………………………………… 15
◆ TECHNICAL AND RECOMMENDATIONS FOR USE
■ Malfunction Checking………………………………………… 17
■ Technical and Environmental Specifications ………… 18
- 3 -
Model No.: VSVM-103
- 4 -
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the
set from one of the following sources:
- An outdoor aerial
- A cable television network
- A satellite network
Connecting Computer
- Connect the DVI connector to the PC video connector.
Connecting External A/V Devices
- Connect VIDEO cable to an appropriate external A/V device such as
VCR, DVD or Camcorder.
- Headphone may be connected to the headphone output .While the
headphone is connected, the sound from the built-in speakers will be disabled.
Connecting Power
- Connect the Adapter to the Power input .
Adjust Volume
Press to increase or decrease the volume. Also used to select items on
the on-screen menu.
Change Channel
Press to change channels. Also press to highlight various items on the
on-screen menu.
OSD MENU
Press to see an on-screen menu of your TV’s features.
TV/VIDEO
Displays a menu of all of the available input sources (TV, AV , PCI).
POWER
Press to turn the TV on and off.
（The “Touch Screen connector” is for “Touch Screen” model）
- 5 -
Viewing the Remote Control
Becoming Familiar with the Remote Control
The following table presents the most frequently used buttons and their functions.
---------------------------------------------------------------
Used to display the next or previous stored channel.
Used to increase or decrease the volume
Switch the input source.
Used to select a channel numbered ten or over ,Press
this button, and enter the two digit channel number.
Used to switch the sound off temporarily.
Used to display the on-screen menu system.
Return to previous channel.
Power ON / OFF the TV.
- 6 -
Viewing the Display mode
You can check up the information of current video.
―――――――――――――――――――――――――――――――
Press the button.
Display the On Screen Display menu.
The signal information should be display on the screen.
――――――――――――――――――――――――――――
You may see different information on different signal mode.
VGA mode：
TV mode：
――――――――――――――――――――――――――――
Pressthe button to exit the OSD menu.
On TV mode ,you can change the TV system and sound system
for the TV signal of your country.
- 7 -
Setup Picture
You can select the type of picture which best corresponds to your
viewing requirements.
―――――――――――――――――――――――――――――――
Press the button , display the OSD main menu.
Press the or button , select the option.
Press the or button , adjust the option.
――――――――――――――――――――――――――――――――
For example , adjust the brightness：
Press the or button ,select the brightness button：
Press the or button , adjust the brightness.
――――――――――――――――――――――――――――
Pressthe button , exit the OSD menu.
- 8 -
Storing Channels Automatically
You can scan for the frequency ranges available to you (and
availability depends on your country).
-------------------------------------------------------------
Press the button , display the OSD main menu.
Press the or button , select the channel .
Press the button , select the auto store .
Press the button to scanning and storing .
------------------------------------------------------------
- 9 -
Storing Channels Manually
When storing channels manually, you can choose whether or not to
store each of the channels found
---------------------------------------------------------------
Press the button , display the OSD main menu.
Press the or button , select the channel .
Press the button , select the manual store .
Move the cursor the start , press the button to scanning.
---------------------------------------------------------------
When scanning , you can press the or button to change
program number .
- 10 -
Fine Tuning Channel Reception
If the reception is clear, you do not have to fine-tune the channel , as
this is done automatically during the search and store operation . If
however the signal is weak or distorted, you may have to fine-tune the
channel manually.
---------------------------------------------------------------
Press the button , display the OSD main menu.
Press the or button , select the channel .
Press the button , select the fine tune .
---------------------------------------------------------------
---------------------------------------------------------------
Press or button until you reach the setting to obtain a
sharp and clear picture and good sound quality.
To store the setting, press the button.
Indice
