Product information
2VITODENS 300
VITODENS 300
The combination of top technology:
The modulating MatriXcompact gas
burner and the proven stainless steel
InoxRadial heating surface guarantee a
standard efficiency up to 109%. This
reduces heating costs and protects the
environment.
Like all wall mounted condensing boilers
from Viessmann, Vitodens300 too is
equipped with a stainless steel
InoxRadial heating surface. And it
incorporates all advantages of the heat
transfer principle, of its design and its
high self−cleaning effect.
With its modulation range of 1:4, the
MatriXcompact gas burner saves in
terms of energy consumption and
emissions. Its extremely clean
combustion lets it perform substantially
better than the limits set for the "Blue
Angel".
Vitodens300 is equipped with automatic
flue gas adaptation. This constantly
adapts to changing conditions, for
example weather changes. And that
ensures permanently good combustion.
The MatriX−compact gas burner with its
quite combustion and the modulating,
electronic BUS−controlled pump
operating with reduced flow noise,
ensure a pleasantly quiet operation.
The combi version of Vitodens300 is
equipped with a comfort plate heat
exchanger. This delivers DHW at a
constant outlet temperaturewithout
delay.
Benefits at a glance
HGas fired condensing boiler as wall
mounted model, 4.5 to 66kW.
HStandard efficiency: up to 109%.
HThe stainless steel InoxRadial heating
surface ensures high operational
reliability and a long service life.
HMatriXcompact gas burner,
modulation range 1:4.
HThe emissions fall substantially below
the limits set for the "Blue Angel"
certificate of environmental excellence.
HLow power consumption through
governed AC fan and heating circuit
pump.
HAs a condensing combination boiler:
High DHW convenience as a result of its
integrated DHW Quick−System and
comfort controli.e. instant hot water
at a constant temperature.
HVitotronic control units for room
temperature−dependent or weather−
compensated mode, with integral
diagnostic system and Optolink laptop
interface; capable of communicating
with Vitodata.
With the Vitotronic333 cascade control
unit, rated outputs up to 264kW are
feasible.
HParticularly easy to install, maintain and
service, due to modular design
generous wiring chamber.
HAutomatic flue gas adaptation ensures
permanently high efficiency.
HParticularly quiet operation.
HSpace saving, because clearances at the
boiler sides are no longer required.
HVitodens300 with 4.5 to 12.0kW
automatically regulates to achieve
optimum combustion values. The gas
family or type require no selection.
HFlexible connections to adapt third
party boiler installations enable easy
replacement of alternative makes.
Vitodens300
49 and 66kW
Tested quality
VDE designation approval applied
for.
CE designation in accordance with
current EC Directives.
Clean combustion. Performs significantly
better than the limits set by the "Blue
Angel" certificate of environmental
excellence to RALUZ61.
5822304 GB
