ViewSonic EP5012-L Manuale utente

EP5012-L/EP5012-TL

Multimedia Digital Poster

User Guide

Model No.: VS15900

Thank you for choosing ViewSonic

With over 25 years as a world leading provider of visual solutions,

ViewSonic is dedicated to exceeding the world’s expectations for

technological evolution, innovation, and simplicity. At ViewSonic, we

believe that our products have the potential to make a positive impact

in the world, and we are confident that the ViewSonic product you have

chosen will serve you well.

Once again, thank you for choosing ViewSonic !

Compliance Information

NOTE: This section addresses all connected requirements and statements regarding

regulations. Confirmed corresponding applications shall refer to nameplate labels

and relevant markings on unit.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for

a Class A/Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the

interference at his/her own expense.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: To comply with the limits for the Class A/Class B digital device, pursuant

to Part 15 of the FCC Rules, this device must be installed in computer equipment

certified to comply with the Class A/Class B limits. All cables used to connect the

computer and peripherals must be shielded and grounded. Operation with non-

certified computers or non-shielded cables may result in interference to radio or

television reception. Changes and modifications not expressly approved by the

manufacturer could void the user’s authority to operate this equipment.

For Canada

CAN ICES-3 (A/B)/NMB-3(A/B)

CE Conformity for European Countries

The device complies with the EMC Directive 2004/108/EC and Low Voltage

Directive 2006/95/EC.

Following information is only for EU-member states:

The mark shown to the right is in compliance with the Waste Electrical and

Electronic Equipment Directive 2002/96/EC (WEEE).

The mark indicates the requirement NOT to dispose of the equipment

as unsorted municipal waste, but use the return and collection systems

according to local law.

If the batteries, accumulators and button cells included with this equipment,

display the chemical symbol Hg, Cd, or Pb, then it means that the battery

has a heavy metal content of more than 0.0005% Mercury or more than,

0.002% Cadmium, or more than 0.004% Lead.

Industry Canada Notice

This device complies with Canadian RSS-210.To prevent radio interference to the

licensed service, this device is intended to be operated indoors and away from

windows to provide maximum shielding. Equipment (or its transmitting antenna) that

is installed outdoors is subject to licensing. The installer of this radio equipment must

ensure that the antenna is located or pointed such that it does not emit RF field in

excess of Health Canada limits for the general population; consult Safety Code 6,

obtainable from Health Canada’s website www.hc-sc.gc.ca/rpb.

R&TTE Compliance Statement

This device complies with the Essential Requirements of the R&TTE Directive of

the European Union (1999/5/EC). This equipment meets the following conformance

standards:

ETSI EN 300 328

EN 301 489-01

EN 301 489-17

EN 62311

Notified Countries: Germany, UK, Netherlands, Belgium, Sweden, Denmark,

Finland, France, Italy, Spain, Austria, Ireland, Portugal, Greece, Luxembourg,

Estonia, Latvia, Lithuania, Czech Republic, Slovakia, Slovenia, Hungary, Poland and

Malta.

iii

Declaration of RoHS2 Compliance

This product has been designed and manufactured in compliance with Directive

2011/65/EU of the European Parliament and the Council on restriction of the use

of certain hazardous substances in electrical and electronic equipment (RoHS2

Directive) and is deemed to comply with the maximum concentration values issued

by the European Technical Adaptation Committee (TAC) as shown below:

Substance

Proposed Maximum

Concentration

Actual Concentration

Lead (Pb) 0,1% < 0,1%

Mercury (Hg) 0,1% < 0,1%

Cadmium (Cd) 0,01% < 0,01%

Hexavalent Chromium (Cr6+) 0,1% < 0,1%

Polybrominated biphenyls

(PBB) 0,1% < 0,1%

Polybrominated diphenyl ethers

(PBDE) 0,1% < 0,1%

Certain components of products as stated above are exempted under the Annex III

of the RoHS2 Directives as noted below:

Examples of exempted components are:

1. 0HUFXU\LQFROGFDWKRGHÀXRUHVFHQWODPSVDQGH[WHUQDOHOHFWURGHÀXRUHVFHQW

lamps (CCFL and EEFL) for special purposes not exceeding (per lamp):

(1) Short length (≦500 mm): maximum 3.5 mg per lamp.

(2) Medium length (＞500 mm and ≦1,500 mm): maximum 5 mg per lamp.

(3) Long length (＞1,500 mm): maximum 13 mg per lamp.

2. Lead in glass of cathode ray tubes.

3. /HDGLQJODVVRIÀXRUHVFHQWWXEHVQRWH[FHHGLQJE\ZHLJKW

4. Lead as an alloying element in aluminium containing up to 0.4% lead by weight.

5. Copper alloy containing up to 4% lead by weight.

6. Lead in high melting temperature type solders (i.e. lead-based alloys containing

85% by weight or more lead).

7. Electrical and electronic components containing lead in a glass or ceramic other

than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or

ceramic matrix compound.

Safety Precautions

FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN

SETTING UP AND USING THE LCD COLOR MONITOR:

• DO NOT REMOVE MONITOR BACK COVER. There are no user serviceable

parts inside and opening or removing covers may expose you to dangerous

shock hazards or other risks. Refer all servicing to qualified service personnel.

• Do not spill any liquids into the cabinet or use your monitor near water.

• Do not insert objects of any kind into the cabinet slots, as they may touch

dangerous voltage points, which can be harmful or fatal or may cause electric

shock, fire or equipment failure.

• Do not place any heavy objects on the power cord. Damage to the cord may

cause shock or fire.

• Do not place this product on a sloping or unstable cart, stand or table, as the

monitor may fall, causing serious damage to the monitor.

• Do not place any objects onto the monitor and do not use the monitor outdoors.

• The inside of the fluorescent tube located within the LCD monitor contains

mercury. Please follow the laws or rules of your municipality to dispose of the

tube properly.

• Do not bend power cord.

• Do not use monitor in high temperature, humid, dusty, or oily areas.

• If monitor or glass is broken, do not come in contact with the liquid crystal and

handle with care.

• Allow adequate ventilation around the monitor, so that heat can properly

dissipate. Do not block ventilated openings or place the monitor near a radiator

or other heat sources. Do not put anything on top of the monitor.

• The power cable connector is the primary means of detaching the system from

the power supply. The monitor should be installed close to a power outlet, which

is easily accessible.

• Handle with care when transporting. Save packaging for transporting.

• Please clean the holes of back cabinet to reject dirt and dust at least once a year

because of set reliability.

• If using the cooling fan continuously, it’s recommended to wipe holes a minimum

of once a month.

• When installing the remote control batteries;

- Align the batteries according to the (+) and (-) indications inside the case.

- Align the (-) indication of the battery first inside the case.

CAUTION:

Immediately unplug your monitor from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

• When the power supply cord or plug is damaged.

• If liquid has been spilled, or objects have fallen into the monitor.

• If the monitor has been exposed to rain or water.

• If the monitor has been dropped or the cabinet damaged.

• If the monitor does not operate normally by following operating instructions.

Recommended Use

CAUTION:

• For optimum performance, allow 20 minutes for warm-up.

• Rest your eyes periodically by focusing on an object at least 5 feet away. Blink

often.

• Position the monitor at a 90° angle to windows and other light sources to

minimize glare and reflections.

• Clean the LCD monitor surface with a lint-free, nonabrasive cloth. Avoid using

any cleaning solution or glass cleaner!

• Adjust the monitor’s brightness, contrast and sharpness controls to enhance

readability.

• Avoid displaying fixed patterns on the monitor for long periods of time to avoid

image persistence (after image effects).

• Get regular eye checkups.

• The device can be physically fixed to the floor with screws to keep it standing still

and avoid it falling over.

Ergonomics

To realize the maximum ergonomic benefits, we recommend the following:

• Use the preset Size and Position controls with standard signals.

• Use the preset Color Setting.

• Use non-interlaced signals.

• Do not use primary color blue on a dark background, as it is difficult to see and

may produce eye fatigue due to insufficient contrast.

Contents

Compliance Information

FCC Statement.................................................................................... i

For Canada ......................................................................................... i

CE Conformity for European Countries...............................................ii

Industry Canada Notice.......................................................................ii

R&TTE Compliance Statement ...........................................................ii

Declaration of RoHS2 Compliance.....................................................iii

Safety Precautions .............................................................................iv

Recommended Use............................................................................ v

Ergonomics ........................................................................................ v

Product Registration........................................................................... 2

For Your Records ............................................................................... 2

Packing list ......................................................................................... 3

1. Product Introduction

1.1 Overview ...................................................................................... 3

1.2 Product function ........................................................................... 3

1.3 I/O ports introduction .................................................................... 4

1.4 Supported media files format ....................................................... 4

2. Remote Control

3. Main Menu Operation Instructions

3.1 System Settings ........................................................................... 6

3.2 System Control............................................................................. 8

3.3 Network Settings .......................................................................... 9

3.4 Date And Time ........................................................................... 10

3.5 On/Off Timer............................................................................... 11

3.6 Special Settings.......................................................................... 12

3.7 File Management........................................................................ 14

3.8 Exit ............................................................................................. 14

vii

4. Other Setting

4.1 Source Setting............................................................................ 15

4.2 Image Setting ............................................................................. 15

5. ePoster Manager Express Plus Introduction

5.1 Installation .................................................................................. 16

5.2 Playlist Creation ......................................................................... 20

5.3 Player Settings ........................................................................... 24

5.4 Save to USB............................................................................... 25

5.5 Terminal Creation....................................................................... 26

6. Content Update

6.1 Update content directly............................................................... 28

6.2 Update content via ePoster Manager Express Plus................... 28

7. PhotoShop Guidelines

8. Specifications

Other Information

Customer Support ............................................................................ 31

Limited Warranty .............................................................................. 32

ViewSonic and the three birds logo are registered trademarks of ViewSonic

Corporation.

ENERGY STAR®is a registered trademark of the U.S. Environmental Protection

Agency (EPA). As an ENERGY STAR®partner, ViewSonic Corporation has

determined that this product meetsthe ENERGY STAR®guidelines for energy

efficiency.

Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors

or omissions contained herein; nor for incidental or consequential damages resulting

from furnishing this material, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves

the right to change product specifications without notice. Information in this

document may change without notice.

No part of this document may be copied, reproduced, or transmitted by any means,

for any purpose without prior written permission from ViewSonic Corporation.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ViewSonic Segnaletica digitale

ViewSonic

ViewSonic EP4320 Manuale utente

ViewSonic

ViewSonic EP4602 Manuale utente

ViewSonic

ViewSonic EP4610T Manuale utente

ViewSonic

ViewSonic EP5555T Manuale utente

ViewSonic

ViewSonic EP4610 Manuale utente

ViewSonic

ViewSonic EP4203r-2 Manuale utente

ViewSonic

ViewSonic EP4320-2 Manuale utente

ViewSonic

ViewSonic NMP520-W Manuale utente

ViewSonic

ViewSonic EP5502 Manuale utente

ViewSonic

ViewSonic EP5202 Manuale utente

ViewSonic

ViewSonic EP4602r Manuale utente

ViewSonic

ViewSonic EP5502T Manuale utente

ViewSonic

ViewSonic EP4602T Manuale utente

ViewSonic

ViewSonic EP5202r Manuale utente

ViewSonic

ViewSonic DSM3210 Manuale utente

ViewSonic

ViewSonic EP5502 Manuale utente

ViewSonic

ViewSonic EP4610 Manuale utente

ViewSonic

ViewSonic EP4602 Manuale utente

ViewSonic

ViewSonic CDE 20 Series Manuale utente

ViewSonic

ViewSonic EP4602 Manuale utente

ViewSonic

ViewSonic EP3202r Manuale utente

ViewSonic

ViewSonic EP4646 Manuale utente

ViewSonic

ViewSonic DSM3210 Manuale utente

ViewSonic

ViewSonic EP5555 Manuale utente

Manuali Segnaletica digitale popolari di altre marche

LG 72WS70MS-B Manuale utente

SMART-AVI

SMART-AVI SIGNAGEPRO Manuale utente

LG 65SM5D Manuale utente

LG 55EW5TK-A.AUS Manuale utente

KeyWest Technology

KeyWest Technology BREEZE Manuale utente

XtendLan

XtendLan XL-DSP-183C Manuale utente

LG 47VL10 Manuale utente

LG WP400 Guida rapida

Dynascan

Dynascan DS861LR4 Manuale utente

Classic Exhibits

Classic Exhibits SEGUE DESIGNS MOD-1363 Manuale utente

LG 22XE1J Manuale utente

protech

protech KT-7290 Manuale utente

WebDT

WebDT 515A Istruzioni per il montaggio

Samsung

Samsung IWJ Series Manuale utente

LG 84TR3B Manuale utente

LG 55EJ5D Guida rapida

EVERI

EVERI Enrollment Kiosk Manuale utente

LG 75XS4G Manuale utente