ViewSonic ColorPro VP3256-4K Manuale utente
6/11/23, 12:31
VP3256-4K - ViewSonic Monitor
https://manuals.viewsonic.com/VP3256-4K_Full_Guide
2/49
Letter Item
ADisplay Screen
BControl Panel Keys
CPower Button
DSecurity Slot
I/O Ports
Number Item
1AC IN
2HDMI
3DisplayPort
4USB Type C
5USB Type B (Upstream)
6USB Type A (Downstream)
Stand Installation
1. Place the monitor on a flat, stable surface with the screen facing down.
2. Align and slide the upper hooks of the stand into the stand mounting slots.
3. Lift the device into its upright position on a flat, stable surface.
6/11/23, 12:31
VP3256-4K - ViewSonic Monitor
https://manuals.viewsonic.com/VP3256-4K_Full_Guide
3/49
Always place the device on a flat, stable surface.
Failure to do so may cause the device to fall and
damage the device and/or result in personal injury.
Wall Mounting
Refer to the table below for the standard dimensions for wall mount kits.
For use only with a UL certified wall mount
kit/bracket. To obtain a wall-mounting kit or height
adjustment base, contact ViewSonic® or your local
dealer.
Maximum
Loading
Hole Pattern (W x
H)
Interface Pad (W x H x
D)
Pad
Hole
Screw Specification &
Quantity
14 kg 100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm M4 x 10 mm - 4 pieces
1. Turn off the device and disconnect all cables.
2. Place the device on a flat, stable surface with the screen facing down.
3. Pull down slightly to disengage the hooks and remove the stand.
4. Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it
with four (4) screws (M4 x 10 mm).
5. Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.
6/11/23, 12:31
VP3256-4K - ViewSonic Monitor
https://manuals.viewsonic.com/VP3256-4K_Full_Guide
4/49
Using the Security Slot
To help prevent the device from being stolen, use a security slot locking device to secure the device to
a fixed object.
Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the
weight of the monitor in order to prevent the monitor from falling over.
Below is an example of setting up a security slot locking device on a table.
Connecting to Power
1. Connect the power cord to the AC IN jack at the rear of the device.
2. Connect the power cord plug to a power outlet.
Connecting External Devices
Note: To connect the monitor to an external device (PC, laptop…etc.), please use
one of the included video cables for your application and connect it to both terminals.
6/11/23, 12:31
VP3256-4K - ViewSonic Monitor
https://manuals.viewsonic.com/VP3256-4K_Full_Guide
5/49
Connecting to Power
HDMI Connection
DisplayPort Connection
USB Connection
Connect one end of an HDMI cable to the HDMI port of your monitor. Then connect the other end of
the cable to the HDMI port of your computer.
NOTE: The monitor is equipped with two HDMI 2.0 ports.
Connect one end of a DisplayPort cable to the DisplayPort port. Then connect the other end of the
cable to the DisplayPort or mini DP port of your computer.
NOTE: To connect the monitor to the Thunderbolt port (v. 1&2) on your Mac, connect the mini DP end
of the “mini DP to DisplayPort cable” to the Thunderbolt output of your Mac. Then connect the other
end of the cable to the DisplayPort port of the monitor.
HDMI
DisplayPort
USB
6/11/23, 12:31
VP3256-4K - ViewSonic Monitor
https://manuals.viewsonic.com/VP3256-4K_Full_Guide
6/49
Connect one end of a USB cable to a USB port of the monitor. Then connect the other end of the cable
to a USB port of your computer.
USB Number Description
Type
ATwo (2)
Connection for your Type A
peripheral device(s). (e.g., storage
device).
NOTE: To use some peripherals,
please ensure your computer is
also connected to the monitor’s
USB Type B port.
Type
BOne (1)
Connect the USB Type B male
cable (square with 2 cut corners)
to this port, and then connect the
other end of the cable to the USB
downstream port of your
computer.
Type
COne (1)
Make sure your Type C output
device and cable support video
signal transmission.
Height Adjustment
Swivel Adjustment
Tilt Angle Adjustment
Lower or raise the monitor to the desired height (0 to 130 mm).
NOTE: When adjusting, press down firmly along the adjustment track holding the monitor with both
hands on the side.
Swivel the monitor to the left or right for the desired viewing angle (60˚).
Tilt the monitor forwards or backwards to the desired viewing angle (-5˚ to 21˚).
Height Adjustment
Swivel Adjustment
Tilt Angle Adjustment
6/11/23, 12:31
VP3256-4K - ViewSonic Monitor
https://manuals.viewsonic.com/VP3256-4K_Full_Guide
7/49
NOTE: When adjusting, support the stand firmly with one hand while tilting the monitor forwards or
backwards with the other hand.
Screen Orientation Adjustment
Screen Orientation Adjustment
Screen Orientation Adjustment
1. Adjust the monitor height to the highest position. Then tilt the monitor backwards to the full tilt
position.
2. Rotate the monitor 90° clockwise or counter clockwise from landscape to portrait orientation.
NOTE:
When adjusting, make sure to hold both sides of your monitor firmly with both hands.
If using the Auto Pivot function, the system can detect the screen orientation
automatically.
Using the Control Panel Keys
Use the control panel keys to access the Quick Access Menu, navigate the On-Screen Display (OSD)
Menu, and change the settings.
Quick Menu
Screen Orientation Adjustment (Monitor Pivot)
6/11/23, 12:31
VP3256-4K - ViewSonic Monitor
https://manuals.viewsonic.com/VP3256-4K_Full_Guide
9/49
Icon Name Description
Standard Color Select one of the preset standard color settings.
Contrast / Brightness Adjust the contrast or brightness.
Input Select Select the input source.
Main Menu Enter the On-Screen Display (OSD) Menu.
Exit Exit the Quick Menu.
Hot Keys
When the On-Screen Display (OSD) Menu is off, you can quickly access special functions by using the
control panel keys.
6/11/23, 12:31
VP3256-4K - ViewSonic Monitor
https://manuals.viewsonic.com/VP3256-4K_Full_Guide
10/49
Key Description
1
Press and hold the key for 5 seconds to select
User mode. Then select the desired User mode to
activate.
2+3
Press and hold the keys to lock/unlock the OSD
Menu.
When the menu appears on the screen,
continue holding both keys for 10 seconds
to lock/unlock the OSD Menu.
2+4
Press and hold the keys to lock/unlock the Power
button.
When the menu appears on the screen,
continue holding the key for 10 seconds to
lock/unlock the Power button.
3+5 Press the keys to display/hide the boot up screen
when the device is turned on.
Altri manuali per ColorPro VP3256-4K
1
Indice
Altri manuali ViewSonic Monitor
ViewSonic
ViewSonic PT770 - 17" CRT Display Guida per l'amministratore
ViewSonic
ViewSonic VX2767U-2K Manuale utente
ViewSonic
ViewSonic VP191b-1 Manuale utente
ViewSonic
ViewSonic VLED221WM - 22" LCD Monitor Manuale utente
ViewSonic
ViewSonic VS17789 Manuale utente
ViewSonic
ViewSonic LDM216-251 Manuale utente
ViewSonic
ViewSonic VA2736-MH Manuale utente
ViewSonic
ViewSonic VA1931wa-LED Manuale utente
ViewSonic
ViewSonic VP231WB - 23" LCD Monitor Manuale utente
ViewSonic
ViewSonic VA2205 Manuale utente
ViewSonic
ViewSonic VG2021WM Manuale utente
ViewSonic
ViewSonic ViewPanel VA800 Manuale utente
ViewSonic
ViewSonic VG2228WM-LED Manuale utente
ViewSonic
ViewSonic VS16542 Manuale utente
ViewSonic
ViewSonic VE510s Manuale utente
ViewSonic
ViewSonic E70B Manuale utente
ViewSonic
ViewSonic VA2231W Manuale utente
ViewSonic
ViewSonic VP2000S Manuale utente
ViewSonic
ViewSonic VP2365WB - 23" LCD Monitor Manuale utente
ViewSonic
ViewSonic VS16294 Manuale utente
