ViewSonic EP1042T Manuale utente
1
EP1042T
Multimedia Digital Poster
User Guide
Model No. VS16289
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
www.viewsonic.com in English, or in specic languages using the Regional selection
box in the upper right corner of our website. “Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual”
Thank you for choosing ViewSonic
With over 25 years as a world leading provider of visual solutions,
ViewSonic is dedicated to exceeding the world’s expectations for
technological evolution, innovation, and simplicity. At ViewSonic,
we believe that our products have the potential to make a positive
impact in the world, and we are confident that the ViewSonic product
you have chosen will serve you well.
Once again, thank you for choosing ViewSonic !
i
Compliance Information
NOTE: This section addresses all connected requirements and statements regarding
regulations. Confirmed corresponding applications shall refer to nameplate labels and
relevant markings on unit.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class A/Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his/her own expense.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: To comply with the limits for the Class A/Class B digital device, pursuant to
Part 15 of the FCC Rules, this device must be installed in computer equipment certified
to comply with the Class A/Class B limits. All cables used to connect the computer and
peripherals must be shielded and grounded. Operation with non-certified computers or
non-shielded cables may result in interference to radio or television reception. Changes
and modifications not expressly approved by the manufacturer could void the user’s
authority to operate this equipment.
For Canada
CAN ICES-3 (A/B)/NMB-3(A/B)
ii
Declaration of RoHS2 Compliance
The product has been designed and manufactured in compliance with Directive 2011/65/
EU of the European Parliament and the Council on restriction of the use of certain
hazardous substances in electrical and electronic equipment (RoHS2 Directive) and
is deemed to comply with the maximum concentration values issued by the European
Technical Adaptation Committee (TAC) as shown below:
Substance Proposed Maximum
Concentration Actual Concentration
Lead (Pb) 0.1% < 0.1%
Mercury (Hg) 0.1% < 0.1%
Cadmium (Cd) 0.01% < 0.01%
Hexavalent Chromium (Cr6+) 0.1% < 0.1%
Polybrominated biphenyls (PBB) 0.1% < 0.1%
Polybrominated diphenyl ethers (PBDE) 0.1% < 0.1%
Bis (2-ethylhexyl) phthalate (DEHP) 0.1% < 0.1%
Butyl benzyl phthalate (BBP) 0.1% < 0.1%
Dibutyl phthalate (DBP) 0.1% < 0.1%
Diisobutyl phthalate (DIBP) 0.1% < 0.1%
Certain components of products as stated above are exempted under the Annex III of
the RoHS2 Directives as noted below:
Examples of exempted components are:
1. Mercury in cold cathode uorescent lamps and external electrode uorescent lamps
(CCFL and EEFL) for special purposes not exceeding (per lamp):
(1) Short length (≦500 mm): maximum 3.5 mg per lamp.
(2) Medium length (＞500 mm and ≦1,500 mm): maximum 5 mg per lamp.
(3) Long length (＞1,500 mm): maximum 13 mg per lamp.
2. Lead in glass of cathode ray tubes.
3. Lead in glass of uorescent tubes not exceeding 0.2% by weight.
4. Lead as an alloying element in aluminium containing up to 0.4% lead by weight.
5. Copper alloy containing up to 4% lead by weight.
6. Lead in high melting temperature type solders (i.e. lead-based alloys containing 85%
by weight or more lead).
7. Electrical and electronic components containing lead in a glass or ceramic other than
dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic
matrix compound.
iii
Copyright Information
Copyright©ViewSonic Corporation, 2016. All rights reserved.
ViewSonic and the three birds logo are registered trademarks of ViewSonic Corporation.
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the
right to change product specications without notice. Information in this document may
change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for
any purpose without prior written permission from ViewSonic Corporation.
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date:
EP1042T
ViewSonic Multimedia Digital Poster
VS16289
EP1042T_UG_ENG Rev. 1A 06-30-16
_________________________________________
_________________________________________
Product disposal at end of product life
ViewSonic respects the environment and is committed to working and living green.
Thank you for being part of Smarter, Greener Computing. Please visit ViewSonic
website to learn more.
USA & Canada: http://www.viewsonic.com/company/green/recycle-program/
Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/
Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx
iv
Content
1. Introduction ...................................................................... 1
1.1. Features..................................................................... 1
1.2. Package contents ...................................................... 2
1.3. Physical view and features ........................................ 3
1.4. Mounting and Installation........................................... 4
2. Conguring the device ...................................................... 5
2.1. System connections................................................... 5
2.2. Basic settings............................................................. 6
2.3. Connecting the device to your network...................... 7
2.4. Time zone settings................................................... 10
2.5. Content settings........................................................11
2.6. Player information.................................................... 12
2.7. Content conguration – AppStart............................. 13
2.8. Content conguration – FailSafe ............................. 13
2.9. Content conguration – EasyPlay............................ 14
2.10. Display settings...................................................... 17
2.11. Sound settings ....................................................... 19
2.12. Access conguration – Player name...................... 21
2.13. Access conguration – Security............................. 21
2.14. Schedule conguration – Time and date ............... 22
2.15. Schedule conguration – Time Server................... 23
2.16. Schedule conguration – Schedule reboot............ 24
2.17. System conguration - Firmware upgrades........... 25
2.18. System conguration – Expansion storage ........... 26
v
2.19. System conguration - Factory reset..................... 28
2.20. System conguration – Power save ...................... 29
2.21. System conguration – Auto Recovery.................. 29
2.22. System conguration – CEC.................................. 30
2.23. System conguration – Expand Storage by
using micro SD card ............................................... 30
3. Content Management ..................................................... 30
4. Authoring in HTML5 ........................................................ 30
5. Working with SMIL .......................................................... 31
5.1. Introduction.............................................................. 31
5.2. www.a-smil.org for developers................................. 31
6. Technical Data ................................................................ 32
6.1. Specications........................................................... 32
7. Troubleshooting .............................................................. 34
1
1. Introduction
1.1. Features
EP1042T
• 10.1-inch multi-touch widescreen LCD display and stereo
speakers
• Support for HTML5 widgets for dynamic content (W3C
Widgets standard)
• Full-HD 1080p hardware (powered by AC adapter) decoding
of MPEG, H.264, and VC-1 media formats
• 8GB on-board EMMC local storage with micro SD card slot
• Built-in embedded antenna b/g/n 2.4GHz network, Bluetooth
and Ethernet
• Supports full POPAI Screen Media Formats Standards proles
S1 to S12, and E1 to E8
• Multiple 3rd party software solution compatibility
• Industry leading W3C SMIL support for developers
• Backlight LED
• Built-in camera
• Power over Ethernet 13W
• Programmable LED light bars on the side
2
1.2. Package contents
Main Unit AC Adapter
(with select power plug)
Power and Micro SD card
brackets
Display Stand Software QSG Quick Start Guide
Software CD
Note: A USB mouse is required for system setup.
3
1.3. Physical view and features
Web Camera
LED (EP1042T)
Reserved Expansion Port
ADB
Reset Button
Wall Mount Screw Hole
VESA mount (MIS-D75)
Screw spec: M4*4MM
Speaker
Stand screw hole
Power LED
DC inHDMI Out EthernetAudio Out Micro SD
USB
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali ViewSonic Monitor
ViewSonic
ViewSonic P75F+ Manuale utente
ViewSonic
ViewSonic VS19276 Manuale utente
ViewSonic
ViewSonic E70f+SB Manuale utente
ViewSonic
ViewSonic VA2448-LED Manuale utente
ViewSonic
ViewSonic CD4200 - 42" LCD Flat Panel Display Manuale utente
ViewSonic
ViewSonic VG2481-4K Manuale utente
ViewSonic
ViewSonic VS15741 Manuale utente
ViewSonic
ViewSonic VA1932wa Manuale utente
ViewSonic
ViewSonic VA2248m Manuale utente
ViewSonic
ViewSonic LDP163-181 Manuale utente
ViewSonic
ViewSonic VG151-2 Manuale utente
ViewSonic
ViewSonic VA503B - 15" LCD Monitor Manuale utente
ViewSonic
ViewSonic PD1010 Manuale utente
ViewSonic
ViewSonic VS12264 Manuale utente
ViewSonic
ViewSonic VS2447M Manuale utente
ViewSonic
ViewSonic VX700-2 Manuale utente
ViewSonic
ViewSonic VX2739wm Manuale utente
ViewSonic
ViewSonic VA1912w-3 Manuale utente
ViewSonic
ViewSonic VX510 Manuale utente
ViewSonic
ViewSonic E71 Manuale utente
