ViewZ VZ-PRO-ST Series Manuale utente

USER MANUAL

Please read this manual thoroughly before use, and keep it handy for future reference.

11232021-Rev. A

V IDEO WA LL CONTROLLER SETUP & OPERATION

VZ-PRO-ST SERIES

2User ManualVisit the ViewZ USA website at https://www.viewzusa.com

07132021-Rev. A

CONTENTS

Safety Instrucon

Installaon

Setup

Trouble Shoong

Warranty

1. Mark Indicaon & Substance

1. Package & Features

1. Soware Interface

2. Controller Connecon

4. Videowall Display Setup

6. Schedule Setup

3. Control Soware Operaon

5. Main Screen Layout Setup

7. Input Source Setup

8. IP Input Source Setup

2. Warning

2. I/O Interface

3. System Diagram

4. SW Installaon

3. Cauon

4. Operaonal Temperature & Humidity

.......................................................................................................................................................................................

.......................................................................................................................................................................................................

.............................................................................................................................................................................

.....................................................................................................................................................................

..................................................................................................................................................................

....................................................................................................................................................................................

..........................................................................................................................................................

.............................................................................................................................................................

...........................................................................................................................................................................

.......................................................................................................................................................................

..........................................................................................................................................................................................

........................................................................................................................................................................................................

.......................................................................................................................................................

.......................................................................................................................................................................

................................................................................................................................................................................................

..........................................................................................................................................................................................

..................................................................................................................................................................................

.....................................................................................................................................................................................

..................................................................................................................................................................................................

.....................................................................................................................................

3User Manual Visit the ViewZ USA website at https://www.viewzusa.com

07132021-Rev. A

1. Read all warnings and manuals before operaon.

2. Follow all instrucons to ensure longevity of product.

3. Do not place the VZ-PRO Controller near water.

4. Clean only with non-stac electronic dry cloth.

5. Do not block any venlaon openings. Install in accordance with the manufacturer’s instrucons.

6. Do not install near any heat sources such as radiators, heat registers, stoves, or other heat generang devices.

7. Do not override the safety purpose of the polarized or grounding-type plug.

8. A polarized plug has two blades with one wider than the other.

9. A grounding type plug has two blades and a third grounding prong.

10. The wide blade and the third prong are provided for your safety.

11. If the provided plug does not t into your outlet, consult with electrician for replacement of the outlet.

12. Protect the power cord from being walked on or pinched parcularly at plugs, convenience receptacles and the

point where it connects to the monitor.

13. Only use aachment/accessories specied by the manufacturer.

14. Use only with the cart, stand, tripod, bracket or table specied by the manufacturer or sold with the monitor.

When a cart is used, use cauon when moving the cart & monitor in combinaon to avoid injuries.

15. Unplug the VZ-PRO Controller during lightning storms or when unused for long periods of me.

16. Refer all servicing to qualied service personnel. Servicing is required when the VZ-PRO Controller has been

damaged in any way.

The monitor shall not be exposed to dripping or splashing and objects containing liquids, such as vases

shall not be placed near the monitor.

The VZ-PRO Controller should be installed with enough distance (e.g. 10cm) from the wall for sucient

venlaon.

Important Safety Instruction

SAFETY INSTRUCTION

4User ManualVisit the ViewZ USA website at https://www.viewzusa.com

07132021-Rev. A

This symbol is intended to alert the user to the presence of uninsulated & dangerous voltage

within the monitor’s enclosure that may be of sucient magnitude to constute a risk of

electric shock to persons.

This symbol is intended to alert the user to the presence of important operang and

maintenance (servicing) instrucons in the literature accompanying the monitor.

Important Safety Instruction

Mark Indication and Substance

Warning

SAFETY INSTRUCTION

CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL

• Do not use damaged or loose cables and plug.

• Do not pull the plug out by the wire nor touch the plug with wet hands.

• Use only a properly grounded plug and receptacle.

• Do not connect too many extension cords or plugs to one outlet.

• Do not excessively bend the plug and wire.

• Do not disconnect the power cord while it's sll plugged into the monitor.

• Do not place any heavy objects on the power cord. Damage to the cord may cause shock or re.

• Never open the monitor. There are no user-serviceable parts inside and opening will void warranty.

• Removing covers may expose you to dangerous shock hazards or other risks.

• Keep any heang devices away from the power cable and VZ-PRO Controller.

• Do not place the VZ-PRO controller near water.

• Do not insert objects of any kind into the monitor's open slots, as they may touch dangerous voltage points.

• Please follow the laws and regulaons of your municipality to dispose the VZ-PRO Controller properly.

• Do not use the monitor in high temperature, humid, dusty or oily areas.

• Do not install the monitor where it will be exposed to connual vibraon.

• Keep the plasc packaging out of children’s reach.

• If any damage is detected upon rst opening the box, contact agency from which you bought the VZ-PRO

Controller directly.

• If the VZ-PRO Controller does not operate normally – in parcular, if there is any unusual sound or smell coming

from the VZ-PRO Controller – unplug it immediately and contact an authorized dealer or the service center.

5User Manual Visit the ViewZ USA website at https://www.viewzusa.com

07132021-Rev. A

Important Safety Instruction

Caution

Caution - Equipment Grounding Requirements

Available Temperature & Humidity

SAFETY INSTRUCTION

• If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth.

• Make sure to unplug the power cord before cleaning the VZ-PRO Controller.

• Do not drop the VZ-PRO Controller when moving it.

• Place the VZ-PRO Controller in a locaon with low humidity and minimum dust.

• Do not place the monitor on an unstable or small surface area.

• Disconnect the plug from the outlet during storms or lightning or if it has not been used for a long me.

• Do not try to move the VZ-PRO Controller by pulling on the power cord.

• Do not cover the vents on the VZ-PRO controller.

• When moving the VZ-PRO Controller, turn o and unplug the power cord. Make sure that all cables, including

HDMI cable and cables connected to other devices, are disconnected before moving it.

• Place the VZ-PRO Controller out of children’s reach, as they could damage it by hanging onto it.

• Make sure that the power supply and chassis of the spliced processor (here in aer, referred to as the

equipment) are well grounded.

• Make sure the power supply and housing of the large screen connected to the device are well grounded.

• Port damage due to the Non-grounded or improper grounded equipment, the videowall monitor (or large

screen) and videowall controller will not be covered by warranty.

• Operang Temperature : 32°F ~ 122°F / 0°C ~ 50°C

• Operang Humidity : 5 ~ 95% RH

6User ManualVisit the ViewZ USA website at https://www.viewzusa.com

V.1.9.

07132021-Rev. A

The following tools may be required depending on your installaon.

Your ViewZ PRO series is shipped with all proper installaon hardware and components. If there are parts missing

and/or damaged, please stop the installaon and contact ViewZ USA at (888)-998-4399.

Electronic Stud Finder Protecve Eye-wearPencil Level Phillips Screwdriver

Assembly Components - provided

Installation Tools

VZ-PRO-ST Controller (Qty 1) AC Power Cables (Qty 2) Soware USB (Qty 1)

includes User Manual

Ethernet Cable (Qty 1)

INSTALLATION

7User Manual Visit the ViewZ USA website at https://www.viewzusa.com

07132021-Rev. A

1. Hardware Specicaon on local videowall control PC

2. Processor: Intel i3 4th Gen. or Higher | RAM: DDR4 8G or Higher

HDD: SSD 128/256GB or Higher

Network: General TCP/IP network with Gigabit LAN

3. OS Specicaon

- OS: Windows 7 or later

The media contents (images & videos) will not be saved into VZ-PRO-ST Controller.

Local Videowall Control PC H/W Requirement

SYSTEM REQUIREMENTS

Caution

8User ManualVisit the ViewZ USA website at https://www.viewzusa.com

07132021-Rev. A

BASIC FEATURES

VZ-PRO Architecture

Video Interface Signals

1. The designed FPGA system provides stable image processing

capabilies for 24/7 operaon.

2. The VZ-PRO Controller adopts a modular design, which can

be exibly matched with a variety of input and output cards,

which can be upgraded, expanded, and maintained;

1. The standard VZ-PRO Controller comes with HDMI input & HDMI output cards to accept upto 1080p resoluon.

4K HDMI input, DVI and IP decoder cards are also available as opon. Please contact us to get more informaon.

9User Manual Visit the ViewZ USA website at https://www.viewzusa.com

07132021-Rev. A

Video Wall Functions

Other Functions

BASIC FEATURES

1. Achieve display funcons of mulple signal sources on the wall, splicing, roaming, cross-screen, zoom-in, picture-

in-picture, pictureout-picture, screen overlay, etc.

2. Support all signals in the full screen range to open window roaming, superimposing, zooming, no window

posion, size, scale restricon.

3. Support single-screen with mul-window.

4. Support special eect subtle funcon, the font, color, size, scroll speed and direcon of subtles, background

color, background transparency can be exibly selected

5. Support ultra-high-resoluon stac pictures, pictures support mulple picture formats, support mul-window

stac layouts, quick and easy replacement, and make the big screen pictures more colorful

6. Support the presets (scene/layout) in advance & switching scene/layout based on the specic internval me.

7. Support mul-level user management, so each user can set dierent operaon permissions

1. Intelligent fan speed adjustment funcon, which can automacally adjust the fan speed according to equipment

conguraon and temperature condions in various areas to achieve green energy saving and environmental

protecon

2. Support output port mapping technology. There is no need for one-to-one correspondence between the

connecon cables between the VZ-PRO Controller and ViewZ videowall monitors. It is only necessary to ensure

a valid connecon. Port mapping sengs are completed in the control soware, which greatly simplies the

installaon process and shortens the installaon me.

10 User ManualVisit the ViewZ USA website at https://www.viewzusa.com

07132021-Rev. A

Interface Input Ports - PRO-ST

Communication Interface

CONNECT EXTERNAL EQUIPMENTS

q w

t y u

1. HDMI, IP, AUDIO IN - External Input Sources

2. HDMI OUT - Output for Videowall Monitors

3. ETHERNET 10/100 (RJ 45)

4. RS232 (RJ-45) IN - Serial Control / IR Receiver

5. RS485 (RJ-45) IN

6. RS232 (RJ-45) OUT

7. AC 100 - 240V IN x2

8. Web Control Interface (Opon)

Refer to 'VZ-PRO-ST_WebSW_UserManual'. This is to

control this unit using the WEB Browser supporng

Windows, iOS or Android.

2 3 5

TX RX GND

1. IP - IP network port, connect to switch/router, or directly connect to computer

2. RS 232 IN - RS232 port, connect to the computer serial port

3. RS 485 IN - Oponal, reserved RS485 input control

4. RS 232 OUT / RS 485 OUT - Oponal, RS232 loop out, control large screen, RS485 loop out port(reserved)

The video wall controller default IP: 192.168.0.128, ports: 5000, 5100, 5200, 5300;

The video wall controller default serial port (RS232), special rate: 115200bps;

The splicing processor default serial port (RS232), special rate: 115200bps; RJ45 line sequence of RS232 OUT

Altri manuali per VZ-PRO-ST Series

Indice

Altri manuali ViewZ Controllori

ViewZ

ViewZ VZ-PRO-ST Series Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente