Viking W-200 Istruzioni per l’uso

W-200

-200

Door Communication

System

October 9, 2003

Power: 120V AC/12V DC, 500mA UL listed adapter provided

Talk Battery: 15V DC

Dimensions: Controller: 120mm x 70mm x 35mm (4.75” x

2.75” x 1.38”), Speaker Box: 140mm x 115mm x 38mm (5.5” x

4.5” x 1.5”)

Weight: .75 Kg (1.5 lbs.)

Environmental: Controller: 0°C to 32°C (32°F to 90°F) with 5%

to 95% non-condensing humidity, Speaker Box: -26°C to 54°C (-

15°F to 130°F)

Connections: 6 wire modular cord (included)

Maximum Run: 500 feet to speaker box (24 gauge twisted)

Talk to Visitors at Your Door...

Even if You’re on the Phone!

TECHNICAL

s• Communicate handsfree with doors or gates

• Commercial, industrial and residential

security applications

• Provide communication with delivery and

employee entrances

• Works in combination with existing doorbell

• Integrates easily with residential and busi-

ness phone systems

• “Hold” feature allows communication with the

speaker box while a phone call is in progress

• Microphone volume adjustment for back-

ground noise

• Electronics mount indoors

• Provides 15 volt talk battery

• Only two wires required to speaker box

phones. In addition, the W-

200 can also be configured to

work with business telephone

systems.

If the door bell sounds, even

when you are on the phone,

When used in combination with an existing doorbell, the

W-200 provides safe and reliable handsfree two way

communication through your existing residential

enter a Touch Tone command to communicate with the visitor at the door. Calls may be

disconnected or placed on “hold” and reconnected after the conversation with the

speaker box.

A. Accessing Dial Tone

To gain access to C.O. dial tone, dial a Touch Tone “9”, then follow the oper-

ating examples below. When using private dial tone, remove JP1 shunt (see

diagram to the right). Note: Disconnect power and modular cord prior to

removing the cover of the W-200. Phones will instantly have dial tone for mak-

ing calls. Follow the Operating Examples, in the table below, for speaker box

access.

Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or

subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate

such changes.

Fax Back Doc 167

ZF301270 Rev C

Printed in the U.S.A.

B. Microphone Volume

In certain noisy locations the microphone sensitivity may

need to be decreased. A pot is provided on the bottom of

the W-200 to increase (clockwise) or decrease (counter-

clockwise) the microphone sensitivity. Note: The POT

comes factory set to the middle position.

A. Wiring the W-200

B. Mounting the W-200

VIKING©

W-200

DOORCOM

SYSTEM

BUSY

VIKING©

Note: The W-200 may also be used without a

dial tone source. Jumper JP1 must be left in

place. When the doorbell sounds, access line

2 of a two-line phone, pick up a dedicated

telephone or access that line on a KSU/PABX

phone system. Touch Tone commands are

not needed to communicate with a doorbox.

Speaker Box

(included)

W-200 120V AC

Adapter

(included)

PABX/KSU 2-Line

Phone

House

Phone(s)

Dial

Tone

Telephone Jack

Assembly

(not included)

Operating Examples

To access the speaker box (disconnects the call in progress)

To place the call on hold and the speaker box

To return a call placed on hold

Enter Digits

✱9or #9

✱0or #0

✱or #

JP1

Internal View of the W-200

MIC

Increase

Decrease

Bottom View of the W-200

Red

Green

Blue

White

Black Yellow

Back panel of the Speaker Box

Q170200

100½0.5W

VIKING©

To open the speaker box, remove

the two screws from the cover.

Mount back panel to a wall, a sin-

gle gang box or a 4”x4” junction

box with the arrow pointing up.

3.40”

1.55”

3.30”

2.35”

3.40”

Attach the cover to the base

with the two included screws

as shown.

Side view of the Speaker Box

Front view of the Speaker Box

Altri manuali Viking Sistema di interfono

Viking

Viking AES--2000 Istruzioni per l’uso

Viking

Viking K-1200 Istruzioni per l’uso

Viking

Viking X-205 Series Manuale utente

Viking

Viking K-1205-EWP Istruzioni per l’uso

Viking

Viking K-1775-BN-IP Manuale utente

Viking

Viking E-75-BN Istruzioni per l’uso

Viking

Viking K-1700-3 Istruzioni per l’uso

Viking

Viking E-70-BK Manuale utente

Viking

Viking E-60-BK Istruzioni per l’uso

Viking

Viking C-1000B Guida rapida alla configurazione

Viking

Viking HID-1 Istruzioni per l’uso

Viking

Viking E-10-IP Manuale utente

Viking

Viking E-20 Manuale utente

Viking

Viking E-75-SS Istruzioni per l’uso

Viking

Viking E-30 Istruzioni per l’uso

Viking

Viking E-50-BK Istruzioni per l’uso

Viking

Viking C-1000B Istruzioni per l'installazione e il funzionamento

Viking

Viking C-1000B Istruzioni per l’uso

Viking

Viking K-1775-IP Series Manuale utente

Viking

Viking AES-2005 Istruzioni per l’uso

Viking

Viking K-1270 Series Manuale utente

Viking

Viking E-35-IP Manuale utente

Viking

Viking AES--2000 Istruzioni per l’uso

Viking

Viking E-35-EWP Manuale utente

Manuali Sistema di interfono popolari di altre marche

Bticino

Bticino LINEA 3000 Manuale utente

MSI

MSI MSI-140 Manuale utente

golmar

golmar Stadio Plus Manuale utente

CyberData

CyberData 011211 series Manuale

Vidos

Vidos duo M1021 Manuale utente

Vimar

Vimar ELVOX 7539/E Manuale utente

SSS Siedle

SSS Siedle BTSV 850-03 Manuale utente

Dahua

Dahua VTO Series Manuale utente

Elvox

Elvox 5651 Manuale utente

Videx

Videx VIDEOKIT Series Manuale utente

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuale utente

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuale utente

SSS Siedle

SSS Siedle BFCV 850 Series Manuale utente

GRD

GRD MAX V2 Manuale utente

Alecto

Alecto ADI-250 Manuale utente

Aiphone

Aiphone IE-8MD Manuale utente

Perel

Perel EDB4 Manuale utente

Bticino

Bticino Classe 300 Manuale utente