Viking LDB-1 Istruzioni per l’uso

The LDB-1 provides a loop activated contact closure

when used in series with telecom devices on analog

phone lines. The LDB-1 will initiate a dry relay contact

on any off-hook condition. Alternatively, add the optional

PS-2 power supply to provide switched DC power.

Loop Detector Board with on board

12 Volt Regulator

VIKING©

Technical Practice

Telecom Solutions for the 21st Century LDB-1

Loop Detect Board

November 24, 1999

Dimensions: 47.6mm x 30.5mm (1.875” x 1.2”)

Mounting: (2) #4 screws (not included) or foam tape (included)

Shipping Weight: .45 kg (1 lb)

Added Loop Resistance: 40 ohms

Maximum Loop Current: 125 mA

Minimum Loop Current: 18 mA

Operating Temperature: -26°to 54°C (-15°to 130°F)

Installation

Installation Diagram

Printed in the U.S.A. ZF301230 Rev AFax Back Doc # 406

Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking

Electronics, its affiliates and/or subsidiaries assume no responsibility for errors and/or omissions contained in this information. Revisions of this

document or new editions of it may be issued to incorporate such changes.

Product Support Line...(715) 386-8666 Fax Back Line...(715) 386-4345

Incoming

Phone line

Telecom

Device

N.O. dry contacts

Note: If dry contacts

are required, do not

use PS-2.

The relay itself is phone line powered and does not need an

external power supply. Because both TIP and RING currents flow

through the relay, excellent line balance is maintained.

Specifications

Maximum Supply Voltage Input: 35 VDC

Maximum 12V Supply Current: 500 mA with PS-2

Longitudinal Balance: 63 dB minimum

Maximum Contact Voltage: 200 VDC

Maximum Contact Current: 500 mA

Maximum Contact Power: 10 W

Connections: 7 pin screw terminal block

12V DC Output

- or -

Optional PS-2 Power Supply

(not included)

http://www.VikingElectronics.com

Sales...(715) 386-8861

Schematic Diagram

+12V DC

COM

1 2 3 4 5 6 7

Indice

Altri manuali Viking Sistema di sicurezza

Viking

Viking 1600A Series Istruzioni per l’uso

Viking

Viking PROXCARD Manuale utente

Viking

Viking Access Control Manuale utente

Viking

Viking VS 2625 Manuale utente

Viking

Viking VCAM-1 Istruzioni per l’uso

Viking

Viking K-2000-DVA Manuale utente

Viking

Viking MTG-10 Manuale utente

Viking

Viking K-202-DVA Istruzioni per l’uso

Viking

Viking RAD-1A Manuale utente

Viking

Viking PROXCARD Istruzioni per l’uso

Viking

Viking K-202-DVA Manuale utente

Viking

Viking RC-2A Istruzioni per l'installazione e il funzionamento

Viking

Viking FIRECYCLE III Manuale utente

Viking

Viking VS 1125 Istruzioni per l'installazione

Viking

Viking DVA-TNT Istruzioni per l’uso

Viking

Viking VS 1125 Istruzioni operative originali

Viking

Viking C-1000B Istruzioni per l’uso

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente