ViM BATE-R Manuale utente

NT00000591-BATE-R-AN-231018

INSTRUCTION MANUAL

INSTALLATION | WIRING | COMMISSIONING | MAINTENANCE |

AFNOR CERTIFICATION

ISO 14001

Environnement

AFNOR CERTIFICATION

ISO 9001

Qualité

BATE-R

Circular electrical heater

Power control tted

2/16 NT00000591-BATE-R-AN-231018

CONTENTS

1. GENERAL........................................................................................................................................... 3

1.1 Warnings .................................................................................................................................. 3

1.2 Assembly and safety instructions ............................................................................................. 3

1.3 Reception – Storage................................................................................................................. 4

1.4 Warranty................................................................................................................................... 4

2. RANGE / PRODUCT PRESENTATION.............................................................................................. 4

3. INSTALLATION .................................................................................................................................. 5

3.1 Features ................................................................................................................................... 5

4. ELECTRICAL CONNECTION............................................................................................................ 6

4.1 BATE-R Single phase + TJ-K10K duct probe + TR5K potentiometer ...................................... 7

4.2 BATE-R Single-phase + NTC10 room probe and TJ-K10K supply limitation probe................. 8

4.3 BATE-R Three-phase + TJ-K10K duct probe + TR5K box ....................................................... 9

4.4 BATE-R Three-phase + NTC10 room probe and supply limitation probe TJ-K10K.................11

5. COMMISSIONING - MAINTENANCE - ALARMS............................................................................ 13

5.1 Safety instructions .................................................................................................................. 13

5.2 Commissioning....................................................................................................................... 13

5.3 Maintenance and alarm.......................................................................................................... 14

6. WASTE MANAGEMENT.................................................................................................................. 14

6.1 Treatment of packaging and non-hazardous waste ............................................................... 14

6.2 Treatment of Professional WEEE........................................................................................... 14

3/16 NT00000591-BATE-R-AN-231018

1. GENERAL

1.1 Warnings

This product has been manufactured in compliance with rigorous technical safety regulations, in accordance

with CE standards. The CE declaration can be downloaded from the website (contact details on last page).

Before installing and using this product, carefully read these instructions which contain important information

for your safety and that of users during the installation, commissioning and maintenance of this product.

Once installation is complete, leave this notice available for future reference.

The installation of this product and all other interventions (use, connections, commissioning, maintenance)

must be carried out by a professional applying state of the art, standards and safety regulations in force. It

must comply with the requirements relating to EMC and LVD.

The manufacturer cannot be held liable for any possible bodily injury and/or material damage caused when

the safety instructions have not been respected or following a modication of the product.

BATE R coils are intended to be inserted into rigid circular ducts in galvanized steel or aluminum for hea-

ting applications in tertiary buildings.

• Installation inside the premises

• Speed in the heater between 1.5 m/s and 10 m/s

• Environmental temperature between -20°C / +50°C

• Maximum relative humidity 95% without condensation

• Non-potentially explosive atmosphere

• Low salinity atmosphere, without corrosive chemicals

1.2 Assembly and safety instructions

Equip yourself with appropriate PPE (Personal Protective Equipment) before any intervention.

If work needs to be carried out on the appliance, turn o󰀨 the power supply at the main circuit breaker and

ensure that no one can accidentally turn it back on.

Check the earth connection.

Do not touch the electronic card when the device is powered on. The control circuit is not isolated from the

power supply circuit of the device.

• For rigid circular networks in galvanized steel or A1 (M0) aluminum.

• Vertical installation: the ow must be upward.

• Horizontal installation: position the heater so that the connection box is not underneath.

• Fixing the cover with screws.

• Access to the cover necessary for the manual reset. The heater must be capable of being disassem-

bled for replacement and maintenance.

• Possibility of externally insulating the heater with A1 (M0) insulation. Do not insulate the cover.

• Respect the direction of the air indicated by the arrow.

• Respect a distance of twice the diameter between the heater and the other components of the

network, in particular the lters.

• Maintain a distance of 100 mm between the heater and surrounding materials.

• The network must not be completely blocked.

TJ-K10K

Filtre

2xD

TR5K

Bouton de réarmement

manuel

BATTERIE

Boîtier de régulation

2xD

Pièce

chauée

Heated

room

Regulation box Manual reset button

Filter

HEATER

4/16 NT00000591-BATE-R-AN-231018

1.3 Reception – Storage

In the event of lack, non-compliance, total or partial damage of the products delivered, the Buyer must, in

accordance with article 133-3 of the Commercial Code, issue written reservations on the carrier's receipt

and conrm them within the 72 hours by registered letter with a duplicate addressed to the seller. Unreser-

ved receipt of the material deprives the Buyer of any further recourse against us.

The product must be stored protected from bad weather, shocks and dirt due to projections of any kind

during its transport from the supplier to the nal customer, and on the site before installation.

1.4 Warranty

The equipment is guaranteed for 24 months from the invoice date. The warranty is limited to the replace-

ment of parts or equipment whose operation is recognized as defective by the manufacturer, excluding

any compensation or penalties. The costs of labor, removal and rest, travel related to the replacement are

the responsibility of the Customer. Excluded from our warranty are defects linked to abnormal use or not

in accordance with the recommendations in our instructions, defects observed as a result of normal wear

and tear, incidents caused by negligence, lack of monitoring or maintenance, defects due to incorrect ins-

tallation of devices or poor storage conditions prior to assembly.

Under no circumstances is the manufacturer responsible for transformed or repaired equipment, even

partially.

2. RANGE / PRODUCT PRESENTATION

• Diameters from 125 to 500 mm.

• Power from 300 to 18,000 W

• Mono 230V 50Hz or tri 400V 50Hz power supply.

Standard construction

• Circular ange and IP44 connection box in Aluzinc treated steel.

• Connection by waterproof class C seals.

• IP44 cable grommets to cut.

• Heating elements shielded in 304 stainless steel.

• 1 TJ-K10K duct probe to connect for measuring the supply temperature (+0 to +30°C) or high and

low limitation (+15°C/+40°C), delivered in the box or heater.

• 1 TR5K connection box with +0 to +30°C adjustment potentiometer and integrated NTC10 room

sensor, delivered in the box or in the heater.

Regulation box integrating:

• 1 Triac type electronic power PID regulator.

• 1 safety air ow sensor (1.5 m/s).

• 1 safety thermostat with automatic reset 50°.

• 1 safety thermostat with manual reset, setpoint 100°C.

• 3 LED indicating heating (red) / operating mode-fault (green) / voltage presence (yellow).

• Connection terminal block.

Functioning :

Duct temperature regulation

• Micro-switch 1 in position 1 delivered from the factory.

• Adjustment of the temperature set point +0°C to +30°C on the TR5K box.

• Temperature measured by the TJ-K10K probe.

Room temperature regulation

• Micro-switch 1 to be placed in the ON position.

• Adjustment of the temperature set point +0°C to +30°C on the TR5K box.

• Temperature measured by the NTC10 probe in the TR5K box.

• Low +15°C and high +40°C limitation on supply, measured by the TJ-K10K probe. If the temperature

measured by the probe is:

- below 15°C. The heater will heat up to try to reach 15°C (low limit).

- above 40°C. The heater stops heating (high limit).

5/16 NT00000591-BATE-R-AN-231018

3. INSTALLATION

3.1 Features

BATE R

70Ø

Designation Power

(W) Intensity (A) Weight

(Kg) Dimensions (mm) Minimum

ow (m

/h) Maximum

ow (m

/h)

A B C D

230V single-phase power supply

BATE R 125-300W Mono

300 1,4 2,2 276 373 195 48,5 70 450

BATE R 125 600W Mono

600 2,8 2,3 276 373 195 48,5 70 450

BATE R 125 900W Mono

900 4,1 2,4 276 373 195 48,5 70 450

BATE R 125 1200W Mono

1 200 5,5 2,7 276 373 195 48,5 70 450

BATE R 125-1800W Mono

1800 8,2 2,9 276 373 195 48,5 70 450

BATE R 160 300W Mono

300 1,4 2,9 276 373 230 48,5 110 740

BATE R 160 900W Mono

900 4,1 3,1 276 373 230 48,5 110 740

BATE R 160 1800W Mono

1800 8,2 3,3 276 373 230 48,5 110 740

BATE R 160 2100W Mono

2 100 9,6 3,4 276 373 230 48,5 110 740

BATE R 160 2700W Mono

2700 12,3 3,6 276 373 230 48,5 110 740

BATE R 200 600W Mono

600 2,8 3,7 276 373 270 48,5 170 1 150

BATE R 200-900W Mono

900 4,1 3,7 276 373 270 48,5 170 1 150

BATE R 200 1200W Mono

1 200 5,5 3,8 276 373 270 48,5 170 1 150

BATE R 200-2100W Mono

2 100 9,6 3,9 276 373 270 48,5 170 1 150

BATE R 200 3000W Mono

3 000 13,7 4,0 276 373 270 48,5 170 1 150

BATE R 250 600W Mono

600 2,8 6,6 276 373 320 48,5 270 1 800

BATE R 250 1200W Mono

1 200 5,5 6,8 276 373 320 48,5 270 1 800

BATE R 250-2100W Mono

2 100 9,6 6,9 276 373 320 48,5 270 1 800

BATE R 250 3000W Mono

3 000 13,7 7,0 276 373 320 48,5 270 1 800

BATE R 315 900W Mono

900 4,1 8,7 276 376 385 50,0 420 2 850

BATE R 315 1200W Mono

1 200 5,5 8,8 276 376 385 50,0 420 2 850

BATE R 315 1500W Mono

1 500 6,9 8,8 276 376 385 50,0 420 2 850

BATE R 315-2100W Mono

2 100 9,6 10,0 276 376 385 50,0 420 2 850

BATE R 315 3000W Mono

3 000 13,7 10,5 276 376 385 50,0 420 2 850

BATE R 315-4000W Mono

4 000 18,3 11,0 276 376 385 50,0 420 2 850

BATE R 400 3000W Mono

3 000 13,7 9,1 276 376 470 50,0 680 4 600

BATE R 400 5000W Mono

5 000 22,8 10,2 276 376 470 50,0 680 4 600

400V three-phase power supply

BATE R 160 5,400W Tri

5 400 7,8 3,5 276 373 230 48,5 110 740

BATE R 200 6,000W Tri

6 000 8,7 4,4 276 373 270 48,5 170 1 150

BATE R 250 6,000W Tri

6 000 8,7 7,3 276 373 320 48,5 270 1 800

BATE R 250 9,000W Tri

9 000 13,0 8,9 276 373 320 48,5 270 1 800

BATE R 250 12,000W Tri

12 000 17,3 10,5 402 500 320 48,5 270 1 800

BATE R 315 6,000W Tri

6 000 8,7 9,2 276 376 385 50,0 420 2 850

BATE R 315 9,000W Tri

9 000 13,0 10,8 276 376 385 50,0 420 2 850

BATE R 315 12,000W Tri

12 000 17,3 11,4 400 500 385 50,0 420 2 850

BATE R 400 3,000W Tri

3 000 4,3 12,0 276 376 470 50,0 680 4 600

BATE R 400 9,000W Tri

9 000 13,0 13,1 276 376 470 50,0 680 4 600

BATE R 400 12,000W Tri

12 000 17,3 14,0 400 500 470 50,0 680 4 600

BATE R 500 18,000W Tri +N

18 000 26,0 17,8 530 630 570 50,0 1 060 7 070

These datas are visible on the identication label present on each product.

6/16 NT00000591-BATE-R-AN-231018

Housing with TR5K potentiometer and integrated NTC10 probe

• Length: 71mm

• Width: 71mm

• Thickness: 25 mm

26,8

25,5

25,0

Vis de xation du couvercle sous le bouton

71,0

35,5

18,0 4,0

28,0

59,8

Cover xing screw under the button

4. ELECTRICAL CONNECTION

The device is originally equipped with two safety thermostats to prevent overheating: a thermostat with au-

tomatic reset (50°C) and a thermostat with manual reset (100°C) placed on the cover. They must control

a contactor (not supplied) which cuts o󰀨 the general power supply to the heater in the event of a

trip.

The coil is delivered with a shunt onto the M/A terminal block which allows the heater to operate.

The shunt can be replaced by an external contact which will allow remote operation authorization by clo-

sing the circuit.

To ensure the operation of the electric coil is controlled by the fan and manage the safety chain with the

thermostats, provide:

• A general on/o󰀨 control: fan + heater.

• A timer to manage post-ventilation when the system is stopped.

• A power contactor to manage the power supply to the electric heater.

• A power contactor to manage the fan power supply if the latter is a three-phase AC model.

• A protection circuit breaker for each power supply.

Electrical cable sections:

• Control terminal block: provide cables with a section ≤ 4 mm².

• Power terminal block: the terminal block capacities are indicated in the table below:

10 mm² 16 mm²

Single phase 230V ≤ 4,5kW ˃ 4,5kW

Three-phase 400V ≤ 15kW ˃ 15kW

7/16 NT00000591-BATE-R-AN-231018

4.1 BATE-R Single phase + TJ-K10K duct probe + TR5K potentiometer

Blowing temperature control.

Setting the setpoint temperature on the TR5K box.

Micro switch 1 held in position “1”. Micro switch 2: indi󰀨erent position

BATE-R single phase - Duct temperature control

t°t°

LED1 LED2

t°

SOUS TENSION

CHAUFFAGE

MODE

BLEU

MARRON

JAUNE/VERT

230V

Voir détails

asservissement

ventilateur

Shunt pour

autorisation

de marche

X18

X15

F3.2

F3.1

RG1 MICRO SWITCH

TJ-K10K TR5K

PTC

KM1

LED3

A1 A2

COM

OUT

VCC

PE PE

RANG 1

X12

X26

X16

X20

GND

OUT

GND1

OUT1

See fan control

details

POWER ON

HEATING

RANK 1

BLUE

BROWN

YELLOW/GREEN

Shunt for

running au-

thorization

Fan control

EC fan

Single phase EC fan

Three-phase AC fan

Single phase - In < 8A AC fan

Three-phase

Ventilateur

Mar

che/Arrêt

ntilateur +

batterie

10 V

S2S1

KM1

230V230V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V 400V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

S2S1

KM1

230V230V

Marche/Arrêt

ventilateur +

batterie

Ventilateur

230V 400V

KM1

KM2

Fan

Start/stop

fan + heater

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V230V

Ventilateur

Marche/Arrêt

ntilateur +

batterie

10 V

S2S1

KM1

230V 400V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

S2S1

KM1

230V230V

Marche/Arrêt

ventilateur +

batterie

Ventilateur

230V 400V

KM1

KM2

Start/stop

fan + heater

Fan

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V230V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V 400V

Ventilateur

Mar

che/Arrêt

ntilateur +

batterie

S2S1

KM1

230V230V

Marche/Arrêt

ventilateur +

batterie

Ventilateur

230V 400V

KM1

KM2

Start/stop

fan + heater

Fan

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V230V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V 400V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

S2S1

KM1

230V230V

Mar

che/Arrêt

ntilateur +

batterie

Ventilateur

230V 400V

KM1

KM2

Start/

stop fan +

heater

Fan

Included in the heater Accessories

RG1 EKR-K KN1 NI PTC 2NTC controller DBCCA 1V - M/A switch (VIM accessory)

Micro Switch Micro switch EMCR1 - Post-ventilation (VIM Accessory)

AHeating resistors KM1 Electric heater supply contactor

BAutomatic reset thermostat KM2 Fan power contactor

CManual reset thermostat SElectric heater protection circuit breaker

V1 Solid State Drive S1 Control circuit protection circuit breaker

PTC Air ow sensor S2 Fan protection circuit breaker

TR5K Ambient adjustment potentiometer

TJ-K10K Duct probe

8/16 NT00000591-BATE-R-AN-231018

4.2 BATE-R Single-phase + NTC10 room probe and TJ-K10K supply limitation

probe

Room temperature control and supply temperature limitation with micro switch 1 in "On" position. Micro

switch 2: indi󰀨erent position.

Setting the setpoint temperature on the TR5K box.

BATE-R Single-phase - Room temperature control, supply temperature limitation

t°t°

LED1 LED2

t°

SOUS TENSION

CHAUFFAGE

MODE

BLEU

MARRON

JAUNE/VERT

230V

Shunt pour

autorisation

de marche

X18

X15

F3.2

F3.1

RG1 MICRO SWITCH

TJ-K10K

PTC

KM1

LED3

A1 A2

COM

OUT

VCC

PE PE

RANG 1

X12

X26

X16

X20

GND

OUT

GND1

OUT1

TR5K + NTC10

Voir détails

asservissement

ventilateur

See fan control

details

POWER ON

HEATING

RANK 1

BLUE

BROWN

YELLOW/GREEN

Shunt for

running au-

thorization

Fan control

EC fan

Single phase EC fan

Three-phase AC fan

Single phase - In < 8A AC fan

Three-phase

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V230V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V 400V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

S2S1

KM1

230V230V

Marche/Arrêt

ventilateur +

batterie

Ventilateur

230V 400V

KM1

KM2

Fan

Start/stop

fan + heater

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V230V

Ventilateur

Mar

che/Arrêt

ntilateur +

batterie

10 V

S2S1

KM1

230V 400V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

S2S1

KM1

230V230V

Marche/Arrêt

ventilateur +

batterie

Ventilateur

230V 400V

KM1

KM2

Start/stop

fan + heater

Fan

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V230V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V 400V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

S2S1

KM1

230V230V

Marche/Arrêt

ventilateur +

batterie

Ventilateur

230V 400V

KM1

KM2

Start/stop

fan + heater

Fan

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V230V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V 400V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

S2S1

KM1

230V230V

Marche/Arrêt

ventilateur +

batterie

Ventilateur

230V 400V

KM1

KM2

Start/

stop fan +

heater

Fan

Included in the heater Accessories

RG1 EKR-K KN1 NI PTC 2NTC controller DBCCA 1V - M/A switch (VIM accessory)

Micro Switch Micro switch EMCR1 - Post-ventilation (VIM Accessory)

AHeating resistors KM1 Electric heater supply contactor

BAutomatic reset thermostat KM2 Fan power contactor

CManual reset thermostat SElectric heater protection circuit breaker

V1 Solid State Drive S1 Control circuit protection circuit breaker

PTC Air ow sensor S2 Fan protection circuit breaker

TR5K + NTC10 Adjustment potentiometer + NTC10 room probe

TJ-K10K Duct probe

9/16 NT00000591-BATE-R-AN-231018

4.3 BATE-R Three-phase + TJ-K10K duct probe + TR5K box

Blowing temperature control with micro switch 1 in position “1”. Micro switch 2: indi󰀨erent position.

Setting the setpoint temperature on the TR5K box.

BATE-R Three-phase < 18kW - Duct temperature control

t°t°

LED1 LED2

t°

3x400V

SOUS TENSION

CHAUFFAGEMODE

X20

Shunt pour

autorisation

de marche

F3.1

F3.2

LED3

X12

X26

X17

X14

X16

X15

X18

A1 A2

RANG 1

L1 L2 L3

COM

OUT

VCC

GND

OUT

GND1

OUT1

BLEU

MARRON

JAUNE/VERT

Voir détails

asservissement

ventilateur

RG1 MICRO SWITCH

TJ-K10K TR5K

PTC

KM1

V1 V2

See fan control

details

POWER ON

HEATING

RANK 1

BLUE

BROWN

YELLOW/GREEN

Shunt for

running au-

thorization

Fan control

EC fan

Single phase EC fan

Three-phase AC fan

Single phase - In < 8A AC fan

Three-phase

Ventilateur

Mar

che/Arrêt

ntilateur +

batterie

10 V

S2S1

KM1

230V230V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V 400V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

S2S1

KM1

230V230V

Marche/Arrêt

ventilateur +

batterie

Ventilateur

230V 400V

KM1

KM2

Fan

Start/stop

fan + heater

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V230V

Ventilateur

Marche/Arrêt

ntilateur +

batterie

10 V

S2S1

KM1

230V 400V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

S2S1

KM1

230V230V

Marche/Arrêt

ventilateur +

batterie

Ventilateur

230V 400V

KM1

KM2

Fan

Start/stop

fan + heater

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V230V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V 400V

Ventilateur

Mar

che/Arrêt

ntilateur +

batterie

S2S1

KM1

230V230V

Marche/Arrêt

ventilateur +

batterie

Ventilateur

230V 400V

KM1

KM2

Fan

Start/stop

fan + heater

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V230V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V 400V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

S2S1

KM1

230V230V

Mar

che/Arrêt

ntilateur +

batterie

Ventilateur

230V 400V

KM1

KM2

Fan

Start/

stop fan +

heater

Included in the heater Accessories

RG1 EKR-K KN3 NI PTC 2NTC controller DBCCA 1V - M/A switch (VIM accessory)

Micro Switch Micro switch EMCR1 - Post-ventilation (VIM Accessory)

AHeating resistors KM1 Electric heater supply contactor

BAutomatic reset thermostat KM2 Fan power contactor

CManual reset thermostat SElectric heater protection circuit breaker

V1 - V2 Solid State Drive S1 Control circuit protection circuit breaker

PTC Air ow sensor S2 Fan protection circuit breaker

TR5K Ambient adjustment potentiometer

TJ-K10K Duct probe

10/16 NT00000591-BATE-R-AN-231018

BATE-R Three-phase ≥ 18kW - Duct temperature control

Voir détails

asservissement

ventilateur

t°t°

LED1 LED2

t°

3x400V

SOUS TENSION

CHAUFFAGEMODE

Shunt pour

autorisation

de marche

X20

X25

X24

F3.2

F3.1

LED3

X12

X26

X17

X14

X16

X15

X18

GND

OUT

GND1

OUT1

A1 A2

RANG 1

L1 L2 L3

COM

OUT

VCC

RANG 2

L1 L2 L3

BLEU

MARRON

JAUNE/VERT

RG1 MICRO SWITCH

TJ-K10K TR5K

PTC

KM1

See fan control

details

POWER ON

HEATING

RANK 1

RANK 2

BLUE

BROWN

YELLOW/GREEN

Shunt for

running au-

thorization

Fan control

EC fan

Single phase EC fan

Three-phase AC fan

Single phase - In < 8A AC fan

Three-phase

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V230V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V 400V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

S2S1

KM1

230V230V

Marche/Arrêt

ventilateur +

batterie

Ventilateur

230V 400V

KM1

KM2

Fan

Start/stop

fan + heater

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V230V

Ventilateur

Mar

che/Arrêt

ntilateur +

batterie

10 V

S2S1

KM1

230V 400V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

S2S1

KM1

230V230V

Marche/Arrêt

ventilateur +

batterie

Ventilateur

230V 400V

KM1

KM2

Fan

Start/stop

fan + heater

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V230V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V 400V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

S2S1

KM1

230V230V

Marche/Arrêt

ventilateur +

batterie

Ventilateur

230V 400V

KM1

KM2

Fan

Start/stop

fan + heater

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V230V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

10 V

S2S1

KM1

230V 400V

Ventilateur

Marche/Arrêt

ventilateur +

batterie

S2S1

KM1

230V230V

Marche/Arrêt

ventilateur +

batterie

Ventilateur

230V 400V

KM1

KM2

Fan

Start/

stop fan +

heater

Included in the heater Accessories

RG1 EKR-K KN3 NI PTC 2NTC controller DBCCA 1V - M/A switch (VIM accessory)

Micro Switch Micro switch EMCR1 - Post-ventilation (VIM Accessory)

AHeating resistors KM1 Electric heater supply contactor

BAutomatic reset thermostat KM2 Fan power contactor

CManual reset thermostat SElectric heater protection circuit breaker

V1 - V2 Solid State Drive S1 Control circuit protection circuit breaker

PTC Air ow sensor S2 Fan protection circuit breaker

TR5K Ambient adjustment potentiometer

TJ-K10K Duct probe

K1 Internal contactor

Altri manuali per BATE-R

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ViM Riscaldatore elettrico

ViM

ViM BATE-R010 Manuale utente

Manuali Riscaldatore elettrico popolari di altre marche

Heatscope

Heatscope PURE Guida rapida

Sunbeam

Sunbeam Calentador SFH457A Manuale utente

Dura Heat

Dura Heat DH2000C Manuale utente

Harvia

Harvia K10.5GS Manuale utente

Harvia

Harvia GL70 Manuale utente

Heylo

Heylo DE 2 XL Manuale utente

Heylo

Heylo DE 20 SH Manuale utente

Harvia

Harvia PP70SP Manuale utente

Tylo

Tylo SENSE SPORT Manuale utente

Dirna

Dirna ecodirna SUN Manuale di istruzioni

Creda

Creda Heating Solution Manuale utente

THERMEx

THERMEx Frame E Wi-Fi Series Manuale utente

SHUFT

SHUFT UniMAX-R 1400VE EC Manuale utente

HUUM

HUUM CLIFF Series Manuale utente

Harvia

Harvia HL70S Manuale utente

Dimplex

Dimplex DHEBHT Manuale utente

Radialight

Radialight SIRIO Manuale utente

Polaris

Polaris PRE E 0715 H Manuale utente