Vimar 01911 Manuale

01911

Surface electronic chronothermostat - Instruction handbook

CLIMAPIÙ

Space for noting the three-digit PIN number

used as the lockout password.

.............. .............. ..............

WARNING !

When the display shows the symbol blinking, the supply batteries are running down.

CHANGE THEM IMMEDIATELY.

If the battery charge drops under the minimum level, the timer-thermostat output relay automati-

cally switches OFF and it is no longer possible to perform any control operations by using the

device.

Flat batteries and their renewal do not delete the programs or the settings; after changing, it will

in fact be necessary to reset only the date and time.

In addition, if the timer-thermostat is not used for a long period of time, it is always recommended

to remove the batteries so as to prevent any acid leaking out that would damage the device.

For the battery life to be assured, it is always necessary for the front of the timer-thermostat to be

closed after opening to access the vertical temperature sliders.

SUMMARY.

1. The timer-thermostat 01911............................................................................... 2

2. Front view, controls and display ............................................................................ 2

3. Description of the device ................................................................................. 6

4. Field of application ...................................................................................... 6

5. Installation ............................................................................................ 6

6. Connections........................................................................................... 8

7. Inserting/changing the batteries ............................................................................ 10

8. Button functions........................................................................................ 11

9. Access to the menus and operating modes................................................................... 13

10. Operation of the timer-thermostat with the radio-frequency module................................................. 28

11. Initial switch-on ........................................................................................ 29

12. Main characteristics ..................................................................................... 30

13. Installation regulations ................................................................................... 31

14. Conformity ........................................................................................... 31

1. THE TIMER-THERMOSTAT 01911

The Vimar 01911 timer-thermostat is able to assure ideal tempera-

ture conditions for every hour of the day.

It is equipped with a large display for viewing the temperature and

the settings, a push-button and knob for selecting and programming

the functions and a set of vertical sliders that are used to adjust the

temperature extremely simply.

The timer-thermostat can work in different modes, also timed, and

with two types of automatic operation (during which it is also pos-

sible to change the programmed temperature temporarily).

The device is powered with two AA LR06 1.5 V penlight batteries

that are easily found on the market and assure a power supply for

the device for over a year.

2. FRONT VIEW, CONTROLS AND DISPLAY

Indicators and controls

1. Room temperature

2. Unit of measurement of temperature

3. Day of the week

4. Month

5. Current time

6. Daily pattern of the current automatic program

7. OFF

8. Timed OFF

9. Antifreeze

10. Heating

11. Air conditioning

12. Changing the temperature during automatic operation

13. Manual

14. Timed Manual

15. Remote control via phone dialler

16. Radio transmitter module present

17. Flat battery

18. Daily programming

19. Weekly programming

20. Push-button for selecting settings and access to

menus

21. Handle for scrolling through menus and setting

numerical values

22. Vertical sliders for setting the temperature in corre-

spondence with Automatic operation.

N.B. If the display shows the symbol it means that the timer-

thermostat is switching on the heating; likewise, the symbol

means that the timer-thermostat is keeping the air-conditioning

on.

If the display does not show either of these two symbols, it

means that the heating or air-conditioning is off at that time.

Figure 1

Figure 2 Figure 3

Figure 4 Figure 5

3. DESCRIPTION OF THE DEVICE

Electronic timer-thermostat with sliders for ambient temperature

control (heating and air conditioning), changeover relay output 5(2)

A 250 V~, power supply with penlight batteries AA LR6 1.5 V (not

supplied), surface mounting, white.

4. FIELD OF APPLICATION

The appliance is designed to control room temperature by acting on

the control circuit of the burner or circulation pump (heating) or on

the control circuit of the air conditioner (air conditioning), ensuring an

ideal temperature, every day, throughout the week.

The large display shows the room temperature, day, time, system

operating status and the daily profile set for the current program.

5. INSTALLATION

The appliance must be installed on a wall at a height of 1.5 m off the

floor in a suitable position for correctly detecting the ambient tem-

perature. It must not be installed in niches, behind doors and curtains

or in areas affected by sources of heat or atmospheric factors. In

particular, it must not be installed on outer walls.

The base of the appliance has 4 slots for installation straight onto

a wall with screws and plugs ø 6 mm (not supplied) or for installa-

tion in recess-mounting enclosures with anchoring by screws with

centre distance 60 mm or 83.5 mm (3-gang joined rectangular

enclosures).

It should be used in dry, dust-free places at a temperature between

0 °C and +40 °C.

Altri manuali per 01911

Indice

Altri manuali Vimar Termostato

Manuali Termostato popolari di altre marche

EWELLY

EWELLY EW-181 Manuale utente

Prolon

Prolon T1100 Istruzioni per l'installazione

Computherm

Computherm Q20 Manuale utente

Heatmiser

Heatmiser neoStat Manuale utente

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuale utente

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuale utente

Saswell

Saswell SAS920XWHB-7-S-RF Guida

Aircalo

Aircalo TFP1-ET85P2 Manuale utente

Honeywell

Honeywell CM721 Manuale utente

Carrier

Carrier DEBONAIR 33CS Manuale utente

Lennox

Lennox iHarmony Zone Thermostat Istruzioni per il montaggio

Gemtech

Gemtech GT7000 Manuale di istruzioni

Rollei

Rollei Smartes 45000 Manuale utente

Sinope

Sinope TH1300RF Manuale utente

Honeywell

Honeywell RLV4305 Manuale utente

Honeywell

Honeywell Prestige 2.0 THX9421 Manuale utente

NuTone

NuTone NTBZ48 Istruzioni operative originali

Stelpro

Stelpro MAESTRO ASMT402AD Manuale utente