Vinotemp 700 Manuale utente

Disassemble/Assemble instructions

FOR YOUR PERSONAL WINECELLAR

BEFORE PROCEEDING, PLEASE READ ALL INSTRUCTIONS FIRST!

The tools required for disassembly and reassembly of your custom Winecellar are as follows:

A) 7/16 Wrench

B) Phillips Head Screwdriver

C) Metric 4mm Hex Wrench

D) 1/4” Nut Driver

You will need a clean level area. It will be necessary for 2 or 3 people to help in disassembly to

complete the following instructions:

1. Remove shipping carton and packing material with exception to pallet. Open door

and remove the plastic bag containing four or six casters depending on the size of

unit.

2. Place the cardboard on ground behind winecellar.

3. With the 7/16” wrench, remove the two baits at the top of cooling unit. Carefully

slide the unit out and place it on the ground out of the way in an upright position,

being careful not to damage the insulated bottom.

4. If you have a model 700, remove the middle bar by removing center screw in

back brace, then remove screws on top and bottom of middle bar.

5. Carefully remove the screws that are on the cabinet side of the hinge making sure

someone is holding the door while screws are being removed. Place the door on

cardboard to the side of winecellar.

6. With the Phillips Head Screwdriver or 1/4” Nut Driver carefully remove the

screws holding the bottle racks, be sure to save the screws which are located in

the top back of rack. Remove entire rack. (Standard cellar trellis racks)

Note:Models with horizontal support bar (single door 440 and single door 400),

the bar must be removed prior to removing rack.

Removal of E-Line (Black Metal) Racks:

-Remove the cellar trellis row sticks from the top of rack.

-Remove the rack spacers on each side, one by one, starting from the

bottom and proceeding to the top.

-Remove the four black metal grids one by one.

-Remove spacers from bottom of unit.

Page 1 of 2 DISASSEMBLY/ASSEMBLY INSTRUCTIONS FOR

YOUR PERSONAL WINECELLAR

7. Carefully tilt

the unit back and place’on cardboard packing or padding so as to

not damage the cabinet.

8. With the 4mm Hex Wrench, careftilly remove bolts on side of cabinet and

place side on cardboard.

9. Having someone holding the top and bottom ends, remove bolts on other side.

Place the side on cardboard.

10. Remove the bolts at top of unit. Place top on cardboard.

Now your winecellar is ready to be carefully moved into its final destination.

ASSEMBLY INSTRUCTIONS

1. Install the casters all the way in on the bottom piece first.

2. To assemble our unit follow the disassembly instructions in reverse.

3. If doors appear not to be aligned, level the cellar as best possible by screwing the

casters back out slowly checking alignment with each adjustment.

4. The unit can be moved to your desired location, being sure to allow 5 to 6 inches

of clearance from the back of winecellar to the wall.

5. Your unit is now ready. to plug into a dedicated 110/115 volt outlet for your

winecellar. We recommend that you do not plug your winecellar into an outlet

used for other electronic items in addition to the winecellar.

Page 2 of 2

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali Vinotemp Refrigeratore per vino

Vinotemp

Vinotemp Il Romanzo Cavanova ILCO2FROST Manuale utente

Vinotemp

Vinotemp VT-45 Manuale utente

Vinotemp

Vinotemp WINE-MATE WM-1500HZD Manuale utente

Vinotemp

Vinotemp VT-50SD-SB Manuale utente

Vinotemp

Vinotemp WINE-MATE WM-1500HTD Manuale utente

Vinotemp

Vinotemp VT-34 TS Manuale utente

Vinotemp

Vinotemp WINE-MATE WM-1500HZD Manuale utente

Vinotemp

Vinotemp VC7S Manuale utente

Vinotemp

Vinotemp WINE-MATE WM1500 HTD-TE Manuale utente

Vinotemp

Vinotemp VT-WC58GNV-SB10 Manuale utente

Vinotemp

Vinotemp VT - 28TEDS Manuale utente

Vinotemp

Vinotemp 3500HZD Manuale utente

Vinotemp

Vinotemp Wine-Mate Series Guida all'installazione

Vinotemp

Vinotemp Portofino Manuale utente

Vinotemp

Vinotemp VT-32SN Manuale utente

Vinotemp

Vinotemp Wine-Mate WM-2520SSW Guida all'installazione

Vinotemp

Vinotemp Wine-Mate WM-2500SSDWC Manuale utente

Vinotemp

Vinotemp cavanova Romanzo IL-OW006 - 2Z Manuale utente

Vinotemp

Vinotemp VT-CAVA1 Manuale utente

Vinotemp

Vinotemp VT-CHILLER SLVR Manuale utente

Vinotemp

Vinotemp 4500DS Manuale utente

Vinotemp

Vinotemp VT-36 Manuale utente

Vinotemp

Vinotemp WINE-MATE VINO1500HZD Manuale utente

Vinotemp

Vinotemp VT-12TEDS Manuale utente

Manuali Refrigeratore per vino popolari di altre marche

U-Line

U-Line Echelon Wine Captain 2075WC Manuale del proprietario

Haier

Haier WS50GA Manuale utente

Cavist

Cavist 62 Manuale utente

Kenmore

Kenmore 461.99130 Manuale utente

Miele

Miele KWT 6422 iG Manuale utente

Danby

Danby DWC113BLSDB Manuale utente

Caple

Caple Wi6128 Manuale utente

Avanti

Avanti WC1001 Manuale utente

Frigidaire

Frigidaire FFWC38F6LS Manuale utente

Titan

Titan TT-W2454SZ Manuale di installazione

Klarstein

Klarstein Botella 166 Uno Manuale utente

Costway

Costway FP10130WL Manuale utente

Lemair

Lemair LWC59 Manuale utente

Haier

Haier JC-125GEA Manuale utente

Caple

Caple WCi46B Manuale utente

Climadiff

Climadiff CLI24 Guida rapida

Viking

Viking VCWB301LSS Manuale utente

Caple

Caple WC6511 Manuale utente