Viotek D2800 Manuale utente
PORTABLE
POWER STATION
User Manual V1.1
www.viotek.com
1-855-229-9472
Warnings
Disclaimers
Read the user manual carefully before using the power station unit. Failure to follow instructions may cause
injury or damage to the unit.
• Do not expose the portable power station to extreme temperatures, water, or other liquids. This can cause
damage to the unit and result in fire, electric shock, or personal injury.
• Do not modify or disassemble the portable power station in any way. Doing so can cause damage to the unit
and result in fire, electric shock, or personal injury.
• Use only the recommended charging cables and accessories that come with the portable power station.
Using other cables or accessories may cause damage to the unit and result in fire, electric shock, or personal
injury.
• Keep the portable power station out of reach of children and pets. Children and pets may accidentally
damage the unit or expose themselves to the risk of electric shock.
• Do not use the portable power station to power medical devices or life support equipment. The unit may not
be reliable enough to power such equipment, and failure to do so can result in serious injury or death.
• The manufacturer is not liable for any damage to the unit or personal injury resulting from improper use,
modification, or disassembly of the portable power station.
• The manufacturer is not responsible for any damage to devices or equipment connected to the portable
power station. It is the user's responsibility to ensure that the devices are compatible with the unit and that they
are connected properly.
• The manufacturer is not responsible for any loss of data or information stored on devices connected to the
portable power station. Users are advised to regularly backup their data and information to avoid loss.
• The manufacturer reserves the right to modify the product specifications and user manual without prior notice.
Users are advised to check for updates regularly.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable
exposure condition without restriction.
Table of Contents
Package Contents .................................................................................................................1
Specifications........................................................................................................................2
Product Overview (Front & Back).........................................................................................3
Product Overview (Left & Right)...........................................................................................4
Product Overview (LCD Display)...........................................................................................5
Charging The Power Station Unit.....................................................................................6,7,8
Powering 110V/120V AC Devices..........................................................................................9
Powering Electric Vehicles..............................................................................................10,11
Powering DC/ USB Devices.................................................................................................12
Expanding Battery Pack.......................................................................................................13
UPS Battery Backup............................................................................................................14
Multifunctional LED Light.....................................................................................................14
Turning Off The Power Station............................................................................................15
Reset From Overloading......................................................................................................16
Maintenance........................................................................................................................16
Troubleshooting..................................................................................................................17
Warranty...............................................................................................................................18
Package Contents
1
2
3
4
1. Power Station Unit
2. AC Charging Cable
3. Car Charging Cable
4. Solar Panel Charging Cable (MC4 to XT60)
1
Specifications
Model No.
Unit Weight
Unit Dimensions (L x D x H)
Battery
AC Input
Car/ Solar XT60 Input
AC Output (120V Mode)
AC Output (240V Mode)
DC Output
Car Socket Output
QC3.0
USB-C
UPS Battery Backup
UPS Switching Time
Protection Types
Operating Noise
Operating Temperature
Charging Temperature
Storage Temperature
D2800
50 lbs (23.1Kg)
18.3 x 10.4 x 11 in (46.5 x 26.5x 27.9 cm)
LiFePO4, 48V 40Ah, 1920Wh
100V~120V 1600W Max
12V~80V 8.6A Max / 650W Max
4x 120V 60Hz Pure Sine Wave (Rated Power: 2000W)
1x 240V 60Hz Pure Sine Wave (Rated Power: 2800W)
12V 8A Max
12V 10A Max
4x USB-A 5V/3A, 9V/2A,12V/1.5A (18W Max)
2x PD 100W, 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A
Support
≤30ms
Overload, Temperature, Short Circuit, Voltage, Current
≤30dB
-10°C~40°C (14°F ~ 104°F)
-10°C~45°C (14°F ~ 113°F)
-10°C~60°C (14°F ~ 140°F)
2
1 2 3
4
5 6 7 8
9 10
Product Overview (Front & Back)
1. Car Socket Output (12V/10A 120W)
2. LCD Display
3. Main Power Button, LCD Display ON/OFF
4. DC Main Output Button
5. 2x DC 5521 Output
6. 4x QC 3.0 USB-A Output
7. 2x USB-C PD 100W Output
8. Solar/ Car Charging XT60 Input (650W Max.)
9. LED Light Button
10. Multifunctional LED Light
3
11
12 13 14
15 16
Product Overview (Left & Right)
11. 4x 120V AC Outlets (2000W Max)
12. AC Charging Port
13. Overload Protection Switch
14. Expansion Battery Port
15. 240V NEMA 14-50 Outlet (2800W Max)
16. AC Mode Switch
4
Product Overview (LCD Display)
1. Battery Percentage
2. Input Power
3. Output Power/ Error Code
4. AC Mode
5. Solar/ Car Charging
6. AC Output
7. DC Output
8. USB Output
9. Remaining Battery/ Charge Time
10. Cooling Fan Status
11. LED Light Status
12. Device Warning
13. Temperature Warning
2 1 10 11
3
4
5 6 7 8
9
13
12
5
Charging The Power Station With AC
On AC charging, the power station unit’s AC switch must be set to OFF or 120V mode, rather than 240V.
1. Connect the AC charging cable to the power input port of the portable power station.
2. Connect the AC charging cable to a 100v~120v AC wall outlet. Do not charge via a power strip. If you need
to use an extension cord, make sure it is rated for the amount of power that the power station requires.
3. The portable power station will be turned on automatically and it's LCD display will show the charging
progress, the battery level and the estimated time to be fully charged.
4. Once the power station battery is fully charged, the LCD display will show 100% battery level.
6
Indice
