VIPA PPC010 EC Manuale utente
PPC | 67K-RRJ0 | Manual
HB160 | PPC | 67K-RRJ0 | en | 18-30
VIPA HMI
Panel PC - PPC010 EC
www.vipa.com/en/service-support/manuals
67K-RRJ0_000_PPC010EC,1,EN - © 2018
VIPA GmbH
Ohmstr. 4
91074 Herzogenaurach
Telephone: +49 9132 744-0
Fax: +49 9132 744-1864
Email: [email protected]
Internet: www.vipa.com
Table of contents
1 General.................................................................................................................... 4
1.1 Copyright © VIPA GmbH ................................................................................. 4
1.2 About this manual............................................................................................. 5
1.3 Safety information............................................................................................. 6
2 Hardware description............................................................................................. 7
2.1 Safety information for users.............................................................................. 7
2.2 Properties......................................................................................................... 8
2.3 Structure........................................................................................................... 9
2.3.1 Overview........................................................................................................ 9
2.3.2 Interfaces..................................................................................................... 11
2.3.3 Memory management.................................................................................. 15
2.4 Dimensions..................................................................................................... 16
2.5 General data................................................................................................... 17
2.6 Technical data................................................................................................. 19
3 Deployment Panel PC.......................................................................................... 22
3.1 Installation...................................................................................................... 22
3.2 Installation of the CFast card.......................................................................... 23
3.3 Commissioning............................................................................................... 24
3.3.1 Firmware update.......................................................................................... 24
3.3.2 VIPA Startup-Manager................................................................................. 25
3.4 Connection to a PLC system.......................................................................... 28
3.5 Operating system Windows Embedded Compact 7....................................... 29
3.5.1 General........................................................................................................ 29
3.5.2 Structure...................................................................................................... 30
3.6 Integrated server............................................................................................ 32
3.6.1 General........................................................................................................ 32
3.6.2 ftp server...................................................................................................... 33
3.6.3 Telnet server................................................................................................ 34
3.6.4 VNC server.................................................................................................. 35
3.7 Access to the network resources.................................................................... 37
4 BIOS setup............................................................................................................ 38
4.1 Overview......................................................................................................... 38
4.2 Main................................................................................................................ 39
4.3 Advanced........................................................................................................ 40
4.4 Chipset........................................................................................................... 50
4.5 Security........................................................................................................... 54
4.6 Boot................................................................................................................ 56
4.7 Save and Exit................................................................................................. 57
5 Installation guidelines.......................................................................................... 59
5.1 Basic rules for the EMC-equitable assembly of installations.......................... 59
5.2 EMC-equitable assembly................................................................................ 62
5.3 EMC-equitable cabling................................................................................... 63
5.4 Special precautions providing high noise immunity........................................ 66
5.5 Checklist for the EMC-compliant installation of controllers............................. 67
Appendix............................................................................................................... 68
A History of changes............................................................................................ 70
VIPA HMI Table of contents
HB160 | PPC | 67K-RRJ0 | en | 18-30 3
1 General
1.1 Copyright © VIPA GmbH
This document contains proprietary information of VIPA and is not to be disclosed or used
except in accordance with applicable agreements.
This material is protected by the copyright laws. It may not be reproduced, distributed, or
altered in any fashion by any entity (either internal or external to VIPA), except in accord-
ance with applicable agreements, contracts or licensing, without the express written con-
sent of VIPA and the business management owner of the material.
For permission to reproduce or distribute, please contact: VIPA, Gesellschaft für Visuali-
sierung und Prozessautomatisierung mbH Ohmstraße 4, D-91074 Herzogenaurach, Ger-
many
Tel.: +49 9132 744 -0
Fax.: +49 9132 744-1864
EMail: [email protected]
http://www.vipa.com
Every effort has been made to ensure that the information contained in
this document was complete and accurate at the time of publishing. Nev-
ertheless, the authors retain the right to modify the information.
This customer document describes all the hardware units and functions
known at the present time. Descriptions may be included for units which
are not present at the customer site. The exact scope of delivery is
described in the respective purchase contract.
Hereby, VIPA GmbH declares that the products and systems are in compliance with the
essential requirements and other relevant provisions. Conformity is indicated by the CE
marking affixed to the product.
For more information regarding CE marking and Declaration of Conformity (DoC), please
contact your local VIPA customer service organization.
VIPA, SLIO, System 100V, System 200V, System 300V, System 300S, System 400V,
System 500S and Commander Compact are registered trademarks of VIPA Gesellschaft
für Visualisierung und Prozessautomatisierung mbH.
SPEED7 is a registered trademark of profichip GmbH.
SIMATIC, STEP, SINEC, TIA Portal, S7-300, S7-400 and S7-1500 are registered trade-
marks of Siemens AG.
Microsoft and Windows are registered trademarks of Microsoft Inc., USA.
Portable Document Format (PDF) and Postscript are registered trademarks of Adobe
Systems, Inc.
All other trademarks, logos and service or product marks specified herein are owned by
their respective companies.
All Rights Reserved
CE Conformity Declaration
Conformity Information
Trademarks
VIPA HMI
General
Copyright © VIPA GmbH
HB160 | PPC | 67K-RRJ0 | en | 18-30
4
Contact your local VIPA Customer Service Organization representative if you wish to
report errors or questions regarding the contents of this document. If you are unable to
locate a customer service centre, contact VIPA as follows:
VIPA GmbH, Ohmstraße 4, 91074 Herzogenaurach, Germany
Telefax: +49 9132 744-1204
EMail: [email protected]
Contact your local VIPA Customer Service Organization representative if you encounter
problems with the product or have questions regarding the product. If you are unable to
locate a customer service centre, contact VIPA as follows:
VIPA GmbH, Ohmstraße 4, 91074 Herzogenaurach, Germany
Tel.: +49 9132 744-1150 (Hotline)
EMail: [email protected]
1.2 About this manual
This manual describes the Panel PC 67K-RRJ0-... from VIPA. It contains a description of
the structure, project engineering and deployment.
Product Order number as of state:
HW FW BS
PPC010 EC 67K-RRJ0-... 01 1.0.0 WindowsÒ Embedded Compact 7
The manual is targeted at users who have a background in automation technology.
The manual consists of chapters. Every chapter provides a self-contained description of a
specific topic.
The following guides are available in the manual:
nAn overall table of contents at the beginning of the manual
nReferences with page numbers
The manual is available in:
nprinted form, on paper
nin electronic form as PDF-file (Adobe Acrobat Reader)
Important passages in the text are highlighted by following icons and headings:
DANGER!
Immediate or likely danger. Personal injury is possible.
Information product sup-
port
Technical support
Objective and contents
Target audience
Structure of the manual
Guide to the document
Availability
Icons Headings
VIPA HMI General
About this manual
HB160 | PPC | 67K-RRJ0 | en | 18-30 5
CAUTION!
Damages to property is likely if these warnings are not heeded.
Supplementary information and useful tips.
1.3 Safety information
The system is constructed and produced for:
ncommunication and process control
ngeneral control and automation tasks
nindustrial applications
noperation within the environmental conditions specified in the technical data
ninstallation into a cubicle
DANGER!
This device is not certified for applications in
–in explosive environments (EX-zone)
The manual must be available to all personnel in the
nproject design department
ninstallation department
ncommissioning
noperation
CAUTION!
The following conditions must be met before using or commis-
sioning the components described in this manual:
– Hardware modifications to the process control system should only be
carried out when the system has been disconnected from power!
–Installation and hardware modifications only by properly trained per-
sonnel.
– The national rules and regulations of the respective country must be
satisfied (installation, safety, EMC ...)
National rules and regulations apply to the disposal of the unit!
Applications conforming
with specifications
Documentation
Disposal
VIPA HMI
General
Safety information
HB160 | PPC | 67K-RRJ0 | en | 18-30 6
2 Hardware description
2.1 Safety information for users
VIPA modules make use of highly integrated components in MOS-Technology. These
components are extremely sensitive to over-voltages that can occur during electrostatic
discharges. The following symbol is attached to modules that can be destroyed by elec-
trostatic discharges.
The Symbol is located on the module, the module rack or on packing material and it indi-
cates the presence of electrostatic sensitive equipment. It is possible that electrostatic
sensitive equipment is destroyed by energies and voltages that are far less than the
human threshold of perception. These voltages can occur where persons do not dis-
charge themselves before handling electrostatic sensitive modules and they can damage
components thereby, causing the module to become inoperable or unusable. Modules
that have been damaged by electrostatic discharges can fail after a temperature change,
mechanical shock or changes in the electrical load. Only the consequent implementation
of protection devices and meticulous attention to the applicable rules and regulations for
handling the respective equipment can prevent failures of electrostatic sensitive modules.
Modules must be shipped in the original packing material.
When you are conducting measurements on electrostatic sensitive modules you should
take the following precautions:
nFloating instruments must be discharged before use.
nInstruments must be grounded.
Modifying electrostatic sensitive modules you should only use soldering irons with
grounded tips.
CAUTION!
Personnel and instruments should be grounded when working on electro-
static sensitive modules.
Handling of electrostatic
sensitive modules
Shipping of modules
Measurements and altera-
tions on electrostatic sen-
sitive modules
VIPA HMI Hardware description
Safety information for users
HB160 | PPC | 67K-RRJ0 | en | 18-30 7
2.2 Properties
The VIPA Panel PC is a combination of industrial PC with state of the art performance
features and a touch panel with ideal display capabilities. The Panel PC is a compact and
modular embedded PC based on WindowsÒ Embedded Compact 7 - WEC7. Besides the
extensive WEC7 functions the Panel PC offers varied communication possibilities.
nWindowsÒ Embedded Compact 7
nMovicon 11 CE Standard
n10.1" 16:10 TFT Panel 262K
nPCAP, multitouch
nDisplay resolution 1280 x 800
nProcessor: Baytrail IntelÒ Celeron J1900, Quad core 2GHz
nWork memory: 2x 204Pin DDR3 SO-DIMM Socket, 2GB DDR3
nUser memory: 2GB SATA DOM
nCFast slot
n2 RS232/RS422/RS485 (switchable by BIOS), 3 USB-A, 2 Ethernet interfaces, VGA
port and Audio out, connector for remote Power switch
nMetal case
nPassive cooling
nEasy mounting via integrated pivoted lever
nProtection class IP66 (frontal)
Order data
Type Order number Description
PPC010 EC 67K-RRJ0-... 10.1'' TFT color, 2x RS232/RS422/RS485, 3x USB-A, 2x Ethernet
RJ45, VGA, Audio out
General
VIPA HMI
Hardware description
Properties
HB160 | PPC | 67K-RRJ0 | en | 18-30 8
2.3 Structure
2.3.1 Overview
1 Slot for voltage supply (DC 12-30V)
2 VGA interface
3 Reset button
4 RS232/RS422/RS485 interface COM 2
5 RS232/RS422/RS485 interface COM 1
6 USB-A interface USB 3.0
7 2x USB-A interface USB 2.0
8 RJ45 jack for Ethernet communication LAN 2
9 RJ45 jack for Ethernet communication LAN 1
10 2 pin connector for remote Power switch
11 3.5mm Audio Line out
12 Power switch (pushbutton)
13 Slot for CFast storage media
14 Display with touch sensitive area (touch screen)
Front view
VIPA HMI Hardware description
Structure > Overview
HB160 | PPC | 67K-RRJ0 | en | 18-30 9
1 Slot for voltage supply (DC 12-30V)
2 VGA interface
3 Reset button
4 RS232/RS422/RS485 interface COM 2
5 RS232/RS422/RS485 interface COM 1
6 USB-A interface USB 3.0
7 2x USB-A interface USB 2.0
8 RJ45 jack for Ethernet communication LAN 2
9 RJ45 jack for Ethernet communication LAN 1
10 2 pin connector for remote Power switch
11 3.5mm Audio Line out
Please make sure that the Panel PC always has to be supplied with
external voltage!
1 Slot for CFast storage media
2 Power switch (pushbutton)
The Panel PC starts automatically when the power supply is switched on.
It may be switched off by the power switch.
But you can change the configuration in the BIOS setup so that the Panel
PC has to be switched on by the power switch.
Ä
‘Restore AC Power
Loss’ page 51
Bottom view
Top view
VIPA HMI
Hardware description
Structure > Overview
HB160 | PPC | 67K-RRJ0 | en | 18-30 10
Questo manuale è adatto per i seguenti modelli
6
Indice
Altri manuali VIPA Pannello touch
VIPA
VIPA 605-1BC00 Manuale utente
VIPA
VIPA TP 606C CAN Manuale utente
VIPA
VIPA HMI 610-1BC01 Manuale utente
VIPA
VIPA 606-3B2E0 Manuale utente
VIPA
VIPA TP 608C Manuale utente
VIPA
VIPA 62M-JEE0 Manuale utente
VIPA
VIPA TP 608C CAN Manuale utente
VIPA
VIPA 606-3B1E0 Manuale utente
VIPA
VIPA HMI TP 612C Manuale utente
VIPA
VIPA TP 605LQS Manuale utente
VIPA
VIPA TP 606C Manuale utente
VIPA
VIPA TP 610LC Manuale utente
VIPA
VIPA 62F-FCB0 Manuale utente
VIPA
VIPA 606-3B4E1 Manuale utente
VIPA
VIPA HMI Manuale utente
VIPA
VIPA TP 608C Manuale utente
VIPA
VIPA TP 610C Manuale utente
VIPA
VIPA 605-1BL30 Manuale utente
VIPA
VIPA TP 608C CAN Manuale utente
VIPA
VIPA HMI 610-3B2I0 Manuale utente
