Viper TC-3 Istruzioni per l'installazione

Residential Sliding Gate Opener

(Magnetic Limit Switch – Chain type)

Installation and Owner’s Manual

For Residential use only – Class 1

(A Vehicular gate operator intended for use in a single family dwelling)

Made in the U.S.A.

:NOITUAC ESAELP DAER SIHT LAUNAM YLLUFERAC

GATEMOTORS INC.

Email: [email protected]

WWW.GATEMOTORS.COM

This Product meets and exceeds the requirements of UL 325, the standard which regulates

gate operator safety, as established and made effective March 1, 2000, by Underwriters Laboratories Inc.

Residential Sliding Gate

Operator

Table of Contents

Table of Contents................................................................................................................ 1

Safety Alert Symbols .......................................................................................................... 4

Description of your Gate Opener ....................................................................................... 5

FEATRUES .................................................................................................................... 5

SAFETY ......................................................................................................................... 5

SPECIFICATIONS......................................................................................................... 5

OPTION(S) ..................................................................................................................... 6

Packing List .................................................................................................................... 6

Tools you will need............................................................................................................. 7

Installation Instruction ........................................................................................................ 8

Concrete Pad ................................................................................................................... 8

Operator Base.............................................................................................................. 8

Electrical Preparation.................................................................................................. 9

Gate Operator Mechanical Installation ......................................................................... 10

Gate Operator Electrical Installation ............................................................................ 12

Radio Transmitter Controls............................................................................................... 16

Optional Equipment Installation Procedures .................................................................... 23

Adjustment and Maintenance ........................................................................................... 24

Having a Problem?............................................................................................................ 25

Figure 1, Platform Base Dimensions .................................................................................. 9

Figure 2, Configuration Diagram ..................................................................................... 18

Figure 3, Control Board Terminals, Indicators and Jumpers ............................................ 19

Figure 4 Typical Gate Extension for Operator.................................................................. 21

Figure 5 Electrical Connection.......................................................................................... 22

Table 1, Specification.......................................................................................................... 5

Table 2 Packing List........................................................................................................... 6

Table 3 Required Tools for Installation .............................................................................. 7

Table 4, Security Code Factory Settings........................................................................... 16

Table 5, Security Code New Install .................................................................................. 16

Residential Sliding Gate

Operator

Safety Alert Symbols

Start here and read these important safety rules for the SLIDE Gate Opener

These safety alert symbols mean CAUTION – Personal safety, property damage

or danger from electrical shock. Read these instructions carefully.

Failure to comply with the following instructions may result in serious injury,

including death or property damage. The SLIDE Gate Opener is designed

and tested to provide reasonably safe service if properly installed and operating

in accordance the instructions provided in this Installation Manual

Electrical

Hazard

Installation and wiring must be in compliance with your local building and

electrical safety codes. Connect the power to the SLIDE Gate opener from a

properly grounded electrical outlet. If using electrical conduit to provide

power, be sure to attach the ground conductor to the SLIDE Frame and the

ground terminal on the circuit board.

Caution Activate the opener only when the gate is in full view and free of

obstructions.

Do not allow children to operate the gate opener using any remote

transmitter or push button switch operators. Serious injury from closing

the gate may result from misuse of the opener.

Caution Do not allow children to play near the gate opener. No one should enter or

leave through the gate while it is opening or closing.

Fasten the CAUTION LABEL near the SLIDE Gate Opener and push button

switch operators as a reminder of safe operating procedures.

Caution Do not wear loose clothing, watches or rings while installing or servicing

the gate opener.

Keep your hands away from the gear box, chain and gate track rollers

during operation.

Do not use force to make adjustments or compensate for binding or

sticking gate operation.

Electrical

Hazard

Disconnect all electrical power before making repairs or removing the

cover on the SLIDE Opener

Residential Sliding Gate

Operator

Description of your SLIDE Gate Opener

FEATRUES

• Weather proof casing

• Reliable magnetic limit switches for accurate open and close gate positions.

• Self-locking gear motor in both open and close positions.

• 300 mhz receiver.

• 2 year limited warranty on motor

• 1 year limited warranty on manual & electric parts

SAFETY

Electric Safety monitor will stop and reverse gate to open position if it senses an

obstruction while gate is closing.

• Release-key to open gate manually in case of an emergency (ie: power failure, fire, etc.).

• Electronic anti-entrapment system, operable in both the open and closing directions.

• Enclosed chain cover for added protection.

SPECIFICATIONS

Table 1, SLIDE GATE OPENER Specification

Motor Safety

Type Permanentsplit

capacitor, oil bath

Personal Push button remote,

auto reversal

Speed 1470 RPM Electronic Independent up/down

force adjustment

Volts 120 VAC ± 10% 60 Hz Electrical Motor overload

protection

Current Less than 6 Amps Start Circuit 24 V push button or

remote sensor.

Operating Temp. -22/158° F (-30/70° C) Emergency Clutch release Key

Torque 15 N.mmaximum

Drive Mechanism Dimension

Gears 1:30 Ratio Length (overall) N/A

Drive Chain gear type Ship Weight 58 lbs.

Length of Travel 25 ft max. by magnetic

Limit Switch

Chain Length 25 ft.MAX, ANSI

chain No. 41

Travel Rate 11” per second. Gate Size 25 ft. (Maximum)

Gate Weight (max.) 800 lbs. (Maximum)

SLIDE GATE OPENER

MODEL:

COMPONENT

DESCRIPTION

COMPONENT

MANUFACTURER MFR’S PART NO. QUANTITY

1Cover tc3cov1 1

2Set Phillips screw tc3sps2 1

31/2 h.p. Motor tc3mot3 1

4Limit magnets tc3lm4 2

5Control board tc3c/b5 1

6Capacitor tc3cap6 1

7L-brackets tc3lb7 2

8Plastic clip tc3pc8 4

9Base plate for receiver/

limit switch sensor tc3bp9 1

10 Base plate for control board tc3bp10 1

11 Plastic clips tc3pc11 4

12 Receiver tc3rec12 1

13 Large bracket for magnet (open limit) tc3lbol13 1

14 Small bracket for magnet (close limit) tc3sbcl14 1

15 Chain bolts tc3cb15 2

16 Spare nuts & boltsbag tc3nb16 1

17 Mounting base tc3mb17 1

18 Motor housing tc3mh18 1

19 Limit switch sensor tc3ls19 1

20 Manual release keys tc3keys20 2

21 Shaft key tc3sk21 1

22 Chain guard tc3cg22 1

23 10 ft. chain tc3ch23 1

24 U- bolts tc3ub24 4

25 Square U-bolts tc3sub25 4

VIP

Residential Sliding Gate

Operator

Tools you will need

During assembly and installation of your opener, the instructions will call for the use of

various tools shown below. Other tools may be required as needed for the installation of

the concrete pad and electrical connection.

Table 3 Required Tools for Installation

Screwdriver Tape Measure Electric Drill Level

File Wrenches Multimeter Pliers Allen Wrenches

Wire Strippers Wire Cutter Adjustable Wrench Socket Wrench

Step #2

Install the Control Board onto the Motor by mounting it on the

small white clips that are on the large Mounting Plate.

(as shown below)

Step #3

Install the Receiver onto the Motor by mounting it on the small

white clips that are on the small Mounting Plate.

(as shown

below)

Step #1

Unscrew the Blue Cover from the Motor and set it aside.

Open the small white box & make sure that the contents include:

(1) - Receiver and (1) - Control Board

Step #4

Now you will begin the installation by screwing the wires that are coming

from the small Receiver Board onto the Terminals (see Pic 1, right) from

the Control Board, in the following order:

Terminal 10 - GREEN WIRE

Terminal 11 - RED WIRE

Terminal 12 - YELLOW WIRE (any)

Terminal 13 - YELLOW & BLUE WIRE (any )

Terminal 14 - BLUE WIRE (any)

Step #5

Next, take the set of wires coming from the motor and connect the

red and black wires anywhere onto the plug.

(as shown on the pic, right)

Once you have connected those wires, you will then take that plug

and connect it to the Control Board on the section labeled:

"MOTOR"

(as shown on the pic, right)

Pic 1

MAKING THE CONNECTION

Step #6

Find the plug with the Blue & Yellow wires on it. Connect the plugon

to the Control Board on the section labeled:

"CAPACITOR"

(as shown on the pic, right)

Step #7

Find the plug with the Red, White & Blue wires on it. Connect the plug

on to the Control Board on the section labeled:

"LIMIT SWITCH"

(as shown on the pic, right)

Step #8

Find the wire coming from the bottom of the Motor that is GREEN &

YELLOW. Screw the "Ground Wire" to Terminal #22 on the Control

Board

(as shown on the pic, right)

Step #9

You are now ready to connect you power wires to your Gate

Opener!

Terminal #1- POWER

Terminal #2- NEUTRAL

Indice

Altri manuali Viper Apricancello

Viper

Viper TR-3 Istruzioni per l'installazione

Viper

Viper TC-9 Istruzioni per l'installazione

Manuali Apricancello popolari di altre marche

Elite

Elite CSW200UL Manuale utente

CAME

CAME FROG-PM4 Manuale utente

SOMFY

SOMFY FX230 Manuale utente

Aprimatic

Aprimatic ONDA 500 Manuale utente

Turnstiles

Turnstiles FSW 900 Manuale utente

Erreka

Erreka BUL BL33 Istruzioni operative

Erreka

Erreka VULCAN S Manuale utente

Beninca

Beninca R1-2 WBV Manuale utente

Erreka

Erreka VULCAN D Manuale utente

Motorline professional

Motorline professional FORT Manuale di istruzioni

Beninca

Beninca BOB5024 Manuale utente

AGA

AGA GATEMASTER 900 HD Manuale utente

Chamberlain

Chamberlain MotorLift HC280ML Manuale utente

SOMFY

SOMFY Dexxo RTS Pro Manuale utente

Cardin

Cardin BL Series Manuale utente

Westfalia

Westfalia 85 27 06 Manuale utente

CAME

CAME F500 Manuale utente

Extel

Extel VERA Manuale utente