Virtual access 6000 Series Manuale utente

Service Managed Gateway

Installing your 6000 Series

Router

Issue 1.1

Date 15 September 2010

Table of contents

of the third parties.

Installing your 6000 Series Router

Issue 1.1 Page 2 of 11

Location variants ..................................................................................... 3

Installing a 6000 series router in the UK ................................................. 4

2.1

Package contents for the UK .................................................................. 4

2.2

6000 series serial number an mo el escriptions for the UK ................ 4

2.3

Installing a UK 6000 series router before it is automatically configure 6

2.4

Installing a GW6000 or GL6000 ADSL router in the UK .......................... 6

Installing a 6000 series router outsi e the UK ........................................ 8

3.1

Package contents for outsi e the UK ...................................................... 8

3.2

6000 series serial number an mo el escriptions for outsi e the UK ... 8

3.3

Installing a 6000 series router before it is automatically configure ... 10

3.4

Installing a GW6000 or GL6000 ADSL SMG outsi e the UK ................... 10

1: Location variants

Installing your 6000 Series Router © Virtual Access Ltd.

Issue 1.1 Page 3 of 11

1Location variants

There are cable variations for the 6000 Series router depending on whether ou have bought

our router for use in the UK or outside the UK.

If ou are a UK customer, read section 2, ‘Installing a 6000 series router in the UK.’

If ou are a customer outside the UK, read section 3, ‘Installing a 6000 series router outside

the UK’.

2: Installing a 6000 series router in the UK

Installing your 6000 Series Router © Virtual Access Ltd.

Issue 1.1 Page 4 of 11

2Installing a 6000 series router in the UK

2.1 Package contents for the UK

If ou are a UK customer, check that ou have all the components listed below.

Table 1: Components for installing a 6000 series router in the UK

Unpack the contents. There is a corresponding silver label located on the bottom of the

router.

2.2 6000 series serial number and model descriptions for the UK

When ou receive our 6000 Series pack, retain the outer packaging. The label containing

the model number, serial number (S/N) and part number (P/N) is located on the side of the

packaging box.

Each 6000 Series router is assigned a unique serial number. Record our device serial

number on a printed cop of our warrant or somewhere ou can easil access it. You must

reference our unique serial number (S/N) when ou contact our distributor or Virtual

1x 6000 Series router

1x purple ADSL cable Both ends of the cable looks like

this:

1x ellow Ethernet cable Both ends of the cable look like

this:

*1x black dial modem cable for

PSTN

One end of the cable looks like

this:

The other end of the cable looks

like a standard BT telephone

connector.

*If ou have purchased a router

with no dial modem, ou will not

receive the black dial modem cable

in our package.

1 x ADSL spliter

1x power cord

2: Installing a 6000 series router in the UK

Installing your 6000 Series Router © Virtual Access Ltd.

Issue 1.1 Page 5 of 11

Access support for installation and configuration confirmation or should ou request service

on the device.

Figure 1: The model number on the side of the packaging

Check that all the parts are in our package before ou install our SMG.

If there is a 'Y' in a field, ou should have that part. If ou are missing an parts, please

contact our distributor.

Mo el

Number

Port

Description

Power

Supply

Unit

(PSU)

Power

Cable

ADSL

Cable

RJ11

(Purple)

Dial

Mo em

Cable

for

PSTN

(Black)

Ethernet

Cable

(Yellow)

ADSL

Filter

GL6110A ADSL Annex

A, Quad

Ethernet

Y Y Y - Y Y

GL6110AM ADSL Annex

M, Quad

Ethernet

Y Y Y - Y Y

GL6125A ADSL Annex

A, Quad

Ethernet,

Dial modem

Y Y Y Y Y Y

GL6125AM ADSL Annex

M, Quad

Ethernet,

Dial modem

Y Y Y Y Y Y

GW6110A ADSL Annex

A, Quad

Ethernet

Y Y Y - Y Y

GW6110AM

ADSL Annex

M, Quad

Ethernet

Y Y Y - Y Y

GW6125A ADSL Annex

A, Quad

Ethernet,

Dial modem

Y Y Y Y Y Y

GW6125AM

ADSL Annex

M, Quad

Ethernet,

Dial modem

Y Y Y Y Y Y

Table 2: 6000 series model numbers and cables

2: Installing a 6000 series router in the UK

Installing your 6000 Series Router © Virtual Access Ltd.

Issue 1.1 Page 6 of 11

2. Installing a UK 6000 series router before it is automatically configured

The SMG is shipped in its factor default configuration for automatic configuration. After ou

have powered up the router for the first time, the config LED flashes to indicate that it is in a

factor default configuration. The SMG automaticall downloads its firmware and configuration

files either via the ADSL or dial modem connection. After connecting the cables, the automatic

configuration process will take between 5 – 10 minutes. After the configuration is complete,

the unit will reboot. After reboot the config LED will be solid to indicate that the automatic

configuration process has been successful.

If this process is not successful, contact our support team.

2.4 Installing a GW6000 or GL6000 ADSL router in the UK

Figure 2: The cables you need to connect an ADSL connection in the UK

1. On our GW6000 or GL6000 SMG, connect one end of the ellow RJ45 Ethernet cable to

the Ethernet port marked A. Connect the other end into the LAN port of our PC or to a

LAN hub or switch.

2. To connect directl to an ADSL service, connect one end of the RJ11 connector on the

purple cable to the port marked ADSL. Connect the other end of the RJ11 connector to the

ADSL socket on the wall or the splitter. This socket can be an RJ45 or an RJ11 port. The

RJ11 will fit into both.

3. If ou have a dial modem, connect the RJ11 end of the black cable to the port marked

MODEM. Connect the other end to a PSTN telephone socket or the splitter.

If ou are using a cable or ADSL modem and not a direct service connection, do not connect

the ADSL cable. Connect one end of the Ethernet cable to one of the Ethernet ports marked B,

C, or D. Connect the other end of the cable to the Ethernet port on our ADSL or cable

modem.

4. Connect the power suppl connector to the power port on the back of the SMG.

2: Installing a 6000 series router in the UK

Installing your 6000 Series Router © Virtual Access Ltd.

Issue 1.1 Page 7 of 11

Figure 3: The power cable for the 6000 series router

The SMG initialises. The CONFIG LED flashes, and all the LEDs temporaril light in sequence.

Then our SMG activates.

The activation process can take between 2 and 10 minutes. The CONFIG LED flashes

throughout activation. When activation finishes, our SMG enters operational mode.

3: Installing a 6000 series router outside the UK

Installing your 6000 Series Router © Virtual Access Ltd.

Issue 1.1 Page 8 of 11

Installing a 6000 series router outside the UK

.1 Package contents for outside the UK

If ou are a customer outside the UK, check that ou have all the components listed below.

Table 3: Components for installing your series 6000 router outside the UK

Unpack the contents. There is a corresponding silver label located on the bottom of the

router.

.2 6000 series serial number and model descriptions for outside the UK

When ou receive our 6000 Series pack, retain the outer packaging. The label containing

the model number, serial number (S/N) and part number (P/N) is located on the side of the

packaging box.

Each 6000 Series router is assigned a unique serial number. Record our device serial

number on a printed cop of our warrant or somewhere ou can easil access it. You must

reference our unique serial number (S/N) when ou contact our distributor or Virtual

Access support for installation and configuration confirmation or should ou request service

on the device.

1x 6000 Series router

1x purple ADSL cable Both ends of the cable looks like

this:

1x ellow Ethernet cable Both ends of the cable look like

this:

*1x purple dial modem cable for

PSTN

Both ends of the cable look like

this:

*If ou have purchased a router

with no dial modem, ou will not

receive a second purple cable in

our package.

1 x ADSL splitter

1x power cord

3: Installing a 6000 series router outside the UK

Installing your 6000 Series Router © Virtual Access Ltd.

Issue 1.1 Page 9 of 11

Figure 4: The model number on the side of the packaging

Check that all the parts are in our package before ou install our SMG.

If there is a 'Y' in a field, ou should have that part. If ou are missing an parts, please

contact our distributor.

Mo el

Number

Port

Description

Power

Supply

Unit

(PSU)

Power

Cable

ADSL

Cable

RJ11

(Purple)

Dial

Mo em

Cable

for

PSTN

(Purple)

Ethernet

Cable

(Yellow)

ADSL

Filter

GL6110A ADSL Annex

A, Quad

Ethernet

Y Y Y - Y Y

GL6110AM ADSL Annex

M, Quad

Ethernet

Y Y Y - Y Y

GL6125A ADSL Annex

A, Quad

Ethernet,

Dial modem

Y Y Y Y Y Y

GL6125AM ADSL Annex

M, Quad

Ethernet,

Dial modem

Y Y Y Y Y Y

GW6110A ADSL Annex

A, Quad

Ethernet

Y Y Y - Y Y

GW6110AM

ADSL Annex

M, Quad

Ethernet

Y Y Y - Y Y

GW6125A ADSL Annex

A, Quad

Ethernet,

Dial modem

Y Y Y Y Y Y

GW6125AM

ADSL Annex

M, Quad

Ethernet,

Dial modem

Y Y Y Y Y Y

Table 4: The 6000 series model numbers and cables

3: Installing a 6000 series router outside the UK

Installing your 6000 Series Router © Virtual Access Ltd.

Issue 1.1 Page 10 of 11

. Installing a 6000 series router before it is automatically configured

The SMG is shipped in its factor default configuration for automatic configuration. After ou

have powered up the router for the first time, the config LED flashes to indicate that it is in a

factor default configuration. The SMG automaticall downloads its firmware and

configuration files either via the ADSL or dial modem connection. After connecting the

cables, the automatic configuration process will take between 5 – 10 minutes. After the

configuration is complete, the unit will reboot. After reboot the config LED will be solid to

indicate that the automatic configuration process has been successful.

If this process is not successful, contact our support team.

.4 Installing a GW6000 or GL6000 ADSL SMG outside the UK

Figure 5: The cables you need to connect an ADSL connection outside the UK

1. On our GW6000 or GL6000 SMG, connect one end of the ellow RJ45 Ethernet cable to

the Ethernet port marked A. Connect the other end into the LAN port of our PC or to a

LAN hub.

2. To connect directl to an ADSL service, connect one end of the RJ11 connector on one

purple cable to the port marked ADSL. Connect the other end of the RJ11 connector to

the ADSL socket on the wall or the splitter. This socket can be an RJ45 or an RJ11 port.

The RJ11 will fit into both.

3. If ou have a dial modem, connect the other purple cable to the port marked MODEM.

Connect the other end to a PSTN telephone socket or the splitter.

If ou are using a cable or ADSL modem and not a direct service connection, do not connect

the ADSL cable. Connect one end of an Ethernet cable to one of the Ethernet ports marked

B, C, or D. Connect the other end of the cable to the Ethernet port on our ADSL or cable

modem.

4. Connect the power suppl connector to the power port on the back of the SMG.

Indice

Altri manuali virtual access Router di rete

virtual access

virtual access GW Series Foglio di istruzioni

virtual access

virtual access GW1000M Manuale utente

virtual access

virtual access GW1000 Series Manuale utente

virtual access

virtual access GW1000 Series Manuale utente

virtual access

virtual access GW9000 Series Manuale di istruzioni

virtual access

virtual access GW2040 Series Manuale utente

virtual access

virtual access GW3330 Manuale utente

virtual access

virtual access GW6600 Manuale utente

virtual access

virtual access GW7000 Series Manuale di istruzioni

virtual access

virtual access GW1032 Manuale utente

virtual access

virtual access GW3330 Manuale utente

virtual access

virtual access GW6600 Manuale utente

virtual access

virtual access GW6600 Manuale utente

virtual access

virtual access GW2040 Series Manuale utente

virtual access

virtual access GW6610 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza

virtual access 6000 Series Manuale utente

Manuali Router di rete popolari di altre marche