Visa Lighting MIDBAY Series Manuale utente
LENS STOP
NOTCHED AREA
FIXTURE JBOX
MOUNTING
SCREWS
Document Descr pt on: Installat on Instruct ons for
•
760635XXDraw ng: DRev: 1 of 3Sheet: MAREng: 4/20/2005
INSTALLATION INSTRUCTIONS
Date Drawn:
MIDBAY
Model:
MIDBAY
F xture Fam ly: 414-354-6600
1717 West C v c Dr ve M lwaukee, WI 53209
© V sa L ght ng
!
Des gn Mod f cat on R ghts Reserved
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully installing and save for future use.•
Make sure all connections are in accordance with the ational Electrical Code and local regulations.•
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture•
Service should be performed by qualified personnel.•
These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting.
MIDBAY Ser es Lum na res
PLATE
ACCESS
AGAINST LENS STOPS.
AND SECURING WITH ATTACHMENT NUT NUT
LENS
FIXTURE
LENS ATTACHMENT
LENS ATTACHMENT, BOX MOUNTING AND ACCESS
1. ANGLE FIXTURE JBOX THROUGH NOTCHED
AREA IN HOUSING AND SLIDE INTO POSITION
SO THAT JBOX MOUNTING FLANGE IS UNDER
HOUSING EDGE AND SCREW HOLES ARE ALIGNED.
2. ATTACH WITH (4) SCREWS PROVIDED THROUGH
HOUSING INTO JBOX FROM TOP AS SHOWN.
3. REMOVE ACCESS PLATE FOR MOUNTING
AND WIRING BY LOOSENING SCREWS (2),
THEN TURN AND SLIDE PLATE TO THE SIDE.
4. MOUNT AND WIRE PER PAGE 2 AND 3.
5. LENS IS ATTACHED BY LIFTING INTO FIXTURE
MOUNTING LEGS THROUGH HOLES IN BRACKET.
WIREGUARD MOUNTING
AND ATTACHING WITH (2) MOUNTING SCREWS.
NUT
MOUNTING
WIREGUARD
SCREWS
MOUNTING BRACKET
FIXTURE
WIREGUARD
WIREGUARD
BRACKET
3. LIFT WIREGUARD AROUND FIXTURE AND INSERT
ATTACH WITH 3 ADDITIONAL NUTS.
1. INSTALL ONE NUT ONTO EACH MOUNTING
LEG OF WIREGUARD (3 PLACES). TURN NUT TO
THE END OF THE THREADS.
2. ASSEMBLE WIREGUARD BRACKETS TO
FIXTURE BY INSERTING INTO SLOT ON HOUSING
MOUNTING
LEG
LOOP CONNECTOR
JBOX ( BY OTHERS)
CABLE ENDS
SEPARATE)
(ORDERED
DETAIL
CABLE MOUNTING
ASSEMBLY
DETAIL
CABLE / CHAIN MOUNTING
MOUNTING
CHAIN
CABLE
HOOK OPTION
JBOX PLATE &
LOOPED/CRIMPED
3. MAKE ELECTRICAL CONNECTIONS PER CODE.
ORDERED SEPARATE FOR ATTACHMENT TO
JBOX)
INSTRUCTIONS IN CABLE ASSEMBLY PACKAGE.
FOR CHAIN MOUNTING, USE (3) LOOP
CONNECTORS TO ATTACH CHAIN TO FIXTURE
EYEBOLTS. (SEE DETAILS).
3. ASSEMBLE ALL CABLES OR CHAINS TO LOOP
CONNECTOR, ATTACH TO STRUCTURE AND
CLOSE LOOP. (JPH OPTION CAN BE ORDERED
SURFACE MOUNTING
HOOK MOUNTING
CHAIN AND SECURE EVERY ".
5. IF DESIRED, ROUTE CORD ALONG THE CABLE/
4. MAKE ELECTRICAL CONNECTIONS PER CODE.
SEPARATE FOR ATTACHMENT TO JBOX)
1. ASSEMBLE FIXTURE JBOX TO FIXTURE WITH
SCREWS (4) PROVIDED. SEE PAGE 1 FOR
JBOX MOUNTING AND JBOX ACCESS INSIDE
FIXTURE. MAKE ELECTRICAL CONNECTION AT
FIXTURE.
2. LOOP CABLE THRU EYEBOLTS (3) ON FIXTURE
AND ATTACH CABLE GRIPPER TO CABLE PER
1. ASSEMBLE FIXTURE JBOX TO FIXTURE WITH
SCREWS (4) PROVIDED. SEE PAGE 1 FOR
JBOX MOUNTING AND JBOX ACCESS INSIDE
FIXTURE. MAKE ELECTRICAL CONNECTION AT
FIXTURE.
2. ASSEMBLE LOOP CONNECTOR TO EYEBOLTS AT
FIXTURE AND JBOX PLATE, CLOSE LOOP AND
ATTACH TO STRUCTURE. (JPH OPTION CAN BE
FIXTURE JBOX
LOOP
CONNECTOR
(BY OTHERS)
JBOX
SEPARATE)
(ORDERED
JBOX PLATE &
HOOK OPTION
FIXTURE JBOX
OTHERS)
JBOX (BY
A 4" OCTAGONAL BOX.
2. MAKE ELECTRICAL CONNECTIONS PER CODE.
FIXTURE. ASSEMBLE CLOSURE PLATE TO FIXTURE
JBOX WITH SCREWS (2) PROVIDED WHEN USING
1. ASSEMBLE FIXTURE JBOX TO FIXTURE WITH
SCREWS (4) PROVIDED. SEE PAGE 1 FOR
JBOX MOUNTING AND JBOX ACCESS INSIDE
FIXTURE JBOX
Document Description: Installation Instructions for
•
760635XXDrawing: DRev: 2 of 3Sheet: MAREng: 4/20/2005
INSTALLATION INSTRUCTIONS
Date Drawn:
MIDBAY
Model:
MIDBAY
Fixture Family: 414-354- 00
1717 West Civic Drive Milwaukee, WI 53209
© Visa Lighting
Design Modification Rights Reserved
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully installing and save for future use.•
Make sure all connections are in accordance with the ational Electrical Code and local regulations.•
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture•
Service should be performed by qualified personnel.•
These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting.
MIDBAY Series Luminaires
Document Description: Installation Instructions for
•
760635XXDrawing: DRev: 3 of 3Sheet: MAREng: 4/20/2005
INSTALLATION INSTRUCTIONS
Date Drawn:
MIDBAY
Model:
MIDBAY
Fixture Family: 4 4-354-6600
7 7 West Civic Drive Milwaukee, WI 53209
© Visa Lighting
!
Design Modification Rights Reserved
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully installing and save for future use.•
Make sure all connections are in accordance with the ational Electrical Code and local regulations.•
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture•
Service should be performed by qualified personnel.•
These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting.
MIDBAY Series Luminaires
CABLE
ADJUSTER
WIREWAY
RUNNING THREAD ON WIREWAY COVER.
2. INSERT CABLE ASSEMBLY THROUGH LENS AND
ADJUSTER, TIGHTEN SCREW ONTO CABLE.
LAMP PLATE AND THROUGH HOLE IN CABLE
3. INSERT CABLE ASSEMBLY THROUGH HOLE IN
COVER
THREAD
RUNNING
. SEE PAGE FOR FOR REMOVAL OF WIREWAY
COVER.
LRS CABLE
STEM MOUNTING
ADHESIVE NEEDS TO APPLIED TO STEM THREADS
TO PREVENT LOOSENING OF STEM.
3. MAKE ELECTRICAL CONNECTIONS PER CODE.
JBOX
ROUND SWIVEL
(BY OTHERS)
(BY OTHERS)
CONDUIT
THREADED RIGID
SQUARE OR
SEPARATE)
(ORDERED
PLATE OPTION
. ASSEMBLE FIXTURE JBOX TO FIXTURE WITH
SCREWS (4) PROVIDED. SEE PAGE FOR
JBOX MOUNTING.
2. ATTACH IMC THREADED CONDUIT (BY OTHERS)
TO FIXTURE THROUGH FIXTURE JBOX. ATTACH
TO JBOX (BY OTHERS). SEE PAGE FOR JBOX
ACCESS INSIDE FIXTURE.(SKS OR SKR SWIVEL KIT
OPTION CAN BE ORDERED SEPARATE FOR
ATTACHMENT TO JBOX) *CAUTION: LOCKTITE
FIXTURE JBOX
BRACKET
PHA OPTION STEM MOUNTING
LRS OPTION ASSEMBLY
MOUNTING
BALL
(BY OTHERS)
FLANGE
JBOX
COUPLER
CANOPY
INTO MOUNITNG BRACKET AND ALIGN NOTCHES,
6. LIFT FIXTURE ASSEMBLY AND INSERT SWIVEL BALL
7. MAKE ELECTRICAL CONNECTIONS PER CODE.
ATTACH CANOPY TO MOUNTING BRACKET.
. ASSEMBLE FIXTURE JBOX TO FIXTURE WITH
SCREWS (4) PROVIDED. SEE PAGE FOR
JBOX MOUNTING AND JBOX ACCESS INSIDE
FIXTURE.
2. INSERT FLANGE COUPLER THROUGH HOLE IN
FIXTURE JBOX FROM BOTTOM OF FIXTURE,
ATTACH WITH SCREWS (2) PROVIDED.
3. THREAD STEM INTO COUPLER AT FIXTURE AND
TIGHTEN SET SCREW.
4. SLIDE CANOPY DOWN OVER STEM AND THREAD
SWIVEL BALL ONTO STEM. *CAUTION: LOCKTITE
ADHESIVE NEEDS TO APPLIED TO STEM THREADS
TO PREVENT LOOSENING OF STEM.
5. ATTACH MOUNTING BRACKET TO JBOX (BY
OTHERS)
SWIVEL
FIXTURE JBOX
Altri manuali Visa Lighting Lanterna
