VISIONARY DESIGNS MOD-1521 Manuale
© 2018
Order #XXXXX
Monitor
Mount
Kiosk
Cabinet
2
3
1
Kiosk Top
Monitor
Mount
Completed Assembly
Item
1
2
3
Qty.
1
1
1
Description
Base
15” RR125 Vertical Extrusion
24” RR91 Vertical Extrusion
Steps:
1) Attach vertical extrusion [2] to base [1], using screw.
2) Attach Kiosk Cabinet to vertical extrusion [2], using screw.
See Kiosk Base Attachment detail.
3) Attach horizontal extrusion [3] to Kiosk Top, from inside
Kiosk Cabinet door, using screw.
4) Connect Monitor Mounts to vertical extrusion [3].
See Monitor Mount detail.
Monitor Mount
Slide Connectors into groove
of Vertical extrusion. Tighten
set screws to secure in place.
Attach Monitor Mount back
plate to Connectors, using Bolts.
*
Bolts
Monitor
Mount
Connectors
with Set
Screws
Kiosk Cabinet Attachment
Kiosk Cabinet
Screw
2
*
Insert screw, from
inside Kiosk Cabinet,
into Extrusion [2].
MOD-1521 Monitor Kiosk
SETUP INSTRUCTIONS
If you would like to tell us about your experience with your setup instructions please email us at [email protected]
© 2018
Order #XXXXX
DO NOT USE POWER TOOLS
ALL CONNECTIONS MUST
BE TIGHTLY SECURED
Part Identification - Numbering
Spline Connection Base Plate & Extrusion Connection
General Setup Instructions
- Read entire setup instruction manual prior to
unpacking parts and pieces.
- The setup instructions are created specifically
for this configuration.
- Setup instructions are laid out sequentially in
steps, including exploded views with detailed
explanation for assembly.
WARNING
Cleaning & Packing
- For Cleaning Metal, Plex, & Laminate Parts:
Use a MILD NON-ABRASIVE cleanser and
soft cloth/paper towel to clean all surfaces.
- Keep exhibit components away from heat
and prolonged sun exposure.
Heat and UV exposure will warp and
fade components.
- Retain all provided Packing Materials.
All provided packing materials are for
ease of repacking & component protection.
Disassembly
- For loss prevention, tighten all setscrews
and locks during disassembly
7A
Hex Tool - Essential for Assembly
Extrusion & Lock Connection Engaged Lock
LADDERS OR LIFTS
MAY BE REQUIRED
General Information
© 2018
Crate 1 of 1
Order #XXXXX Crate Packing
Indice
Altri manuali VISIONARY DESIGNS Rack e supporto
VISIONARY DESIGNS
VISIONARY DESIGNS VK-1326 Manuale utente
VISIONARY DESIGNS
VISIONARY DESIGNS MOD-1234 Manuale
VISIONARY DESIGNS
VISIONARY DESIGNS MOD-9003 Manuale utente
VISIONARY DESIGNS
VISIONARY DESIGNS MOD-9001 Manuale utente
VISIONARY DESIGNS
VISIONARY DESIGNS VK-1362 Manuale
VISIONARY DESIGNS
VISIONARY DESIGNS MOD-1377 Manuale
VISIONARY DESIGNS
VISIONARY DESIGNS VK-1127 Manuale
VISIONARY DESIGNS
VISIONARY DESIGNS VK-4040 Manuale
VISIONARY DESIGNS
VISIONARY DESIGNS VK-2984 Manuale utente
VISIONARY DESIGNS
VISIONARY DESIGNS MOD-9008 Manuale
