VisionNet M625N Manuale utente
M625N Installaon Guide
Connect Antennas
1
Connect WAN (Internet) Cable
FOR DSL WAN UPLINK:
Connect the DSL Cable to the “DSL” port.*
FOR NON-DSL WAN UPLINK:
Connect the Ethernet Cable to the “Omni” port.
* ONLY USE CABLES AND FILTERS PROVIDED BY YOUR ISP
Connect LAN Devices
Ethernet ports are ideal for Gaming Consoles and TV Devices.
Only connect ISP provided equipment to ports labeled “IPTV”
Connect Power Supply
Only use the provided 12VDC / 1.5A power supply.
Always use a surge protector.
2
3
4
WiFi SSID ends in last 6 digits of the Boom Label LAN MAC
Security Key matches the Boom Label Serial Number
Secured WiFi Connecon Instrucons
1
Search for the SSID associated with your VisionNet Gateway
2
When Prompted: Enter the Network Security Key
IF YOU EXPERIENCE INTERMITTENT WIFI ISSUES:
Press the “WiFi Channel” buon on the top of the M625N
Wait 60 seconds. The M625N will select a new WiFi channel
Aempt to reconnect
IF YOU STILL HAVE ISSUES, YOU MAY WISH TO CONTACT YOUR ISP
Indice
Altri manuali VisionNet Router wireless
