VisionStat Plus MA-BCKS-5.6 Manuale di istruzioni

MA-BCKS-5.6 Models

MA-BCKS-7.0 Models

Installation & User Manual

Please read this manual thoroughly before operating the device

and keep this document for future reference

VisionStat Plus®

Video Monitoring and

Obstacle Detection Sensor Systems

www.mobileawareness.com

Mobile Awareness

Mobile Awareness, LLC VisionStat Plus® Manufacturer’s Limited Warranty

2-Year Limited Warranty

(Revised 6/2010)

Limited Warranty

VisionStat Plus™Limited Warranty Mobile Awareness warrants to the original end-user purchaser that

a new VisionStat Plus™ Color Camera System is free from structural defects in material and

workmanship and agrees, without charge, to repair or replace any part(s) which fails in normal use and

service because of structural defects in material and workmanship. The VisionStat Plus™ system is

warranted to the original end-user purchaser for (2) two years from the date of purchase. Proof of

original ownership shall be evidenced by invoice or bill of sale in the name of the original end-user

purchaser. This warranty is not transferable. Warranty Limitations: Mobile Awareness does not

warrant and will not repair or replace or make adjustment with respect to any VisionStat Plus™ system

that has been subjected to misuse or abuse, including the following: a) Not following the guidelines

expressed in the Installation Guide ; b) Intentional mis-use or mis-application; c) Changing the original

condition of the VisionStat Plus™ system by alteration or by subjecting it to any processing such as

welding or straightening; e) Accidents, abnormal or severe operating conditions including, without

limitation, fires, or driving during seizures or with a flat tire; f) Failing to follow maintenance and other

instructions and warnings periodically set forth by Mobile Awareness, Recommended maintenance

includes, without limitation, periodic cleaning and inspection for damage; g) This warranty is void if the

original invoice or sales receipt is not available for verification, or upon transfer of title on any products

by the original purchaser. THERE IS NO WARRANTY THAT THE VisionStat Plus™ SYSTEM SHALL

BE MERCHANTABLE OR SATISFACTORY FOR ANY PARTICULAR PURPOSE. NOR IS THERE

ANY OTHER WARRANTY, EXPRESS OR IMPLIED, EXCEPT SUCH AS IS EXPRESSLY SET

FORTH HEREIN. MOBILE AWARENESS, LLC SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR ANY BREACH OF WARRANTY, ITS LIABILITY AND THE

PURCHASER’S EXCLUSIVE REMEDY BEING LIMITED TO REPAIR OR REPLACEMENT OF THE

VisionStat Plus™ SYSTEM AS STATED IN THIS LIMITED WARRANTY. Please refer to Mobile

Awareness standard Terms and Conditions. Customer must notify Mobile Awareness within 10 days of

discovering the defective product or part and provide a description of the defect and complete

information about the manner of its discovery. Repair or replacement will be handled by a Mobile

Awareness representative. This warranty gives you specific legal rights. You may have additional

rights covered under applicable laws.

This limited warranty should be used in conjunction with the VisionStat Plus™ Installation Manual

(“Installation Manual”). The Installation Manual contains important safety information and warnings, and

failure to read and understand this information may result in serious injury or death. If you do not have

copies of the Installation Manual you may obtain copies free of charge along with other specification

literature by contacting Mobile Awareness at (866) 653-5036 or the address below:

Mobile Awareness, LLC

31200 Solon Road, Suite 12

Solon, OH 44139

www.mobileawareness.com

Limitation of Liability.

(a) Seller’s liability and Buyer’s exclusive remedy for any tender of nonconforming or defective goods or

breach of warranty is expressly limited to Seller’s choice of: (i) the repair of non-conforming or

defective goods; (ii) the replacement of non-conforming or defective goods with conforming goods at

the FOB point of shipment; or (iii) the repayment of that portion of the purchase price represented by

non-conforming or defective goods.

(b) In no event will Seller be liable for any incidental, consequential, indirect, special, contingent, or

punitive damages arising out of or relating to: (i) any breach of contract or warranty, tort (including

negligence and strict liability), or other theories of law with respect to products sold or services

rendered by Seller, or undertakings, acts or omissions relating thereto; (ii) the tender of defective or

non-conforming goods; (iii) breach of any other provision of this agreement; or (iv) any claim of any

kind arising out of or relating to any order or Seller’s performance in connection therewith. In any

event, Seller’s liability will not exceed the purchase price of the goods on which such liability is based.

Buyer assumes all other liability for any loss, damage or injury to persons or property arising out of,

connected with or resulting from the use of Seller’s products, either alone or in combination with other

products.

VisionStat Plus Video Monitoring and Obstacle Detection Sensor System

Contents of Manual

1. Product Overview, Product Features, Product Specifications………………..….….……….....………...5

2. VisionStat Plus Package Contents, Optional Items and Accessories........……….………………..........7

3. About the Monitor..................................................................................................................................8

4. About the Cameras............................................................................................................................…9

5. About the ECU…………………………………………………………………………………..…....………..9

6. About the Sensors……………………………………………………………………...…..……..……………9

7. Installation: Monitor and Wiring Harness.............................................................................................10

8. Installation: Cameras...........................................................................................................................12

9. Installation: Sensors………………………………………………………………………...…..…………….15

10. Installation: ECU……………………………………………………………………..…………..…...……….19

11. Monitor Menus.....................................................................................................................................20

12. Maintenance & Troubleshooting..........................................................................................................22

13. Backing Safety Suggestions................................................................................................................24

Precautions

GENERAL SAFETY INFORMATION

All Mobile Awareness, LLC products are strictly intended to be installed as a supple-

ment and are not intended for use as substitutes for vehicle side/rear-view mirror de-

vices, or for any other standard motor vehicle equipment required to be installed on

vehicles by law. Objects in Camera/Monitor view are closer than they appear. When

backing up, proceed cautiously and be prepared to stop. This product is no substitute

for proper attention and defensive driving techniques, observances of traffic laws and

motor vehicle safety regulations.

WARNING

It is unlawful in most jurisdictions for any person(s) to drive a motor vehicle equipped

with a television viewer/screen located at any point forward of the back of the driver’s

seat (or in any location that is visible, directly or indirectly), to the driver while operating

the vehicle. In any installations where such products are used to display television

broadcasts or recorded video playback, installation location must adhere to applicable

laws and regulations.

TAMPERING

To prevent electrical shock, DO NOT OPEN THE MONITOR CASE OR ANY OTHER

ENCLOSED ELECTRONIC PRODUCT. There may be potentially harmful voltages

inside these enclosed products. There is no user serviceable parts inside any of the

products provided by Mobile Awareness, LLC. If tampering is detected, the warranty

will become void.

CAUTION

To avoid damage to electronic circuit, stop using this product while doing welding work

to the vehicle and/or trailers. Never immerse any component in water and do not em-

ploy spray cleaners. When cleaning, use a damp lint-free cloth only. Never connect

this unit to other devices that may be incompatible as it may void the warranty if harm

is caused.

LIABILITY DISCLAIMER-USE OF PRODUCT

The system is designed and intended as a warning aid for vehicle backing and parking

and it should only be used as such. No warranty as to operational efficiency is granted.

In no event shall Mobile Awareness, LLC be liable for consequential, incidental or spe-

cial damages or for installation, adjustment , or other expenses, which may arise from

the use of this product. Mobile Awareness, LLC shall in no event be liable for any di-

rect or indirect damages, including personal injury or death, resulting from errors that

occur in the use of this product, irresponsible acts, unsafe driving or negligence.

Mobile Awareness

Storage and Keeping

1. Do not expose the Monitor, Cameras or other equipment to excessive heat or cold.

Please read and follow the technical specifications provided in this manual.

2. Never use the device near a bathtub, wash basin, kitchen, damp basement, swim-

ming pool or similar places.

3. Never use the device in environments with excessive moisture, dust or smoke.

4. Avoid dropping or striking the device.

5. Avoid using the device in enclosed spaces, areas with excessive vibration or sub-

ject to severe impacts.

6. Never puncture, scratch or use abrasive cleaning materials on device.

7. Do not place cables where they may be pinched or stepped on.

8. Leave at least a 2” space between the Monitor and walls, cabinets or other objects

to allow adequate air circulation around the device.

9. The Monitor is not designed to be waterproof.

Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-

ing two conditions.

1. This device may not cause harmful interference.

2. This device must accept any interference re-

ceived, including interference that may cause

undesired operation.

Design and specifications are subject to change without notice.

Visit www.mobileawareness.com for supplemental information.

VisionStat Plus Video Monitoring and Obstacle Detection Sensor System

VisionStat Plus is an innovative version of the VisionStat Video Monitoring System

integrated with a SenseStat® Obstacle Detection Sensor System. This leading-edge

technology allows the real-time Sensor distance and zone information to be displayed,

along with the camera image, on a single color video monitor. The combination of

which provides the user with the distinctive benefit of both auditory object detection

and visual blind spot video monitoring.

All VisionStat Plus Monitors, Cameras and accessories are interchangeable, using the

same rugged interconnect cable system, providing a complete and reliable solution to

help limit vehicle blind spots and avoid costly accidents.

The VisionStat Plus System contains a high quality TFT LCD Color Monitor that is eas-

ily installed by mounting on the dash, in the dash or on the windshield (utilizes adjusta-

ble universal mounts). For added safety and convenience, the Monitor contains an

audio speaker that can be utilized with the rear and side view Cameras, when applica-

ble.

Central to this obstacle detection system is the 18-LED (infrared for night vision) indus-

trial grade rear view Camera and back up Sensors. It can be configured to switch on

automatically when the vehicle is placed in reverse. The LED illumination is automati-

cally controlled by a built in light sensor. The Camera also contains a built in micro-

phone to further aid the driver with audio from behind the vehicle. The rugged high-

resolution image CCD Camera is constructed of a metal allow shell, designed to be

waterproof for vehicle applications. The Sensors, by utilizing the VisionStat Plus ECU,

will provide the user with a physical distance read out of up to 8 feet and provide an

audible beeping upon reaching 5 feet or below.

Side Cameras are available for applications that require clear coverage of side blind

spots. The Side Cameras are low profile, infrared, industrial grade and angle modifia-

ble. They can be adjusted similar to a mirror for best driver visibility and configured so

that the image appears on the screen when the driver uses the Left or Right Turn Sig-

nal.

•Automatic activation when in reverse – Drivers don’t have to remember to turn on

the system. It’s there for you every time you put your vehicle in reverse.

•Flexible Sensor placement – If overheads or low-hanging wires are a concern, the

Sensors can be installed at the top corners of your vehicle: front or back. They can

also be split between truck top and bumpers.

•VisionStat Plus SE— offers a rugged housing for the systems four Sensors. These

heavy-duty, 2” x 3.2” x 1.4” shock-absorbent housings adapt to a wide variety of vehi-

cles requiring either a vertical or horizontal installation. Protect your systems against

rough handling, roadwear, construction sites and other conditions that might affect your

investment in safety.

•Support for up to 4 Cameras. However, Sensor readings will only incorporate one

camera view.

Product Features

Product Overview

Mobile Awareness

Power Input 10~32VDC

Power Consumption

ECU: 200mA Max

LED Monitor: 250mA Max

5.6” Monitor: ~5W

7.0” Monitor: ~6W

Resolution 5.6” Monitor: 640 x 480

7.0” Monitor: 800 x 480

Distance Detection 0.72~8.20 (ft) / 0.22~2.5 (M)

Detection Tolerance +/- 0.8 inches / +/- 0.02M (at 25°C )

Operating Temp ECU and Sensors: -30°C to +75°C

Monitor and Camera: -20°C to +70°C

Storage Temp -30°C to +80°C

Dimensions ECU: 110mm (L) x 92mm (W) x 32mm (H)

5.6” Monitor: 145mm (W) x 136mm (H) x 31.5mm (T)

7.0” Monitor: 182mm (W) x 122mm (H) x 26mm (T)

Weight ECU: .45 kg

5.6” Monitor: 1.6kg

7.0” Monitor: 1.7kg

Product Specifications

VisionStat Plus Video Monitoring and Obstacle Detection Sensor System

VisionStat Plus Package Contents (Hardware)

 Monitor

 5.6” Wired Monitor (P/N: MA-LCDS-5.6)

 7.0” Wired Monitor (P/N: MA-LCDS-7.0)

 Camera(s) with Mounting Bracket(s)

 18IR Wired Camera (P/N: MA-BCS-IR18)

 Wired Side Camera (P/N: MA-SMS-IR9)

 ECU (P/N: MA-ODSS-ECUPL)

 Sensor with Rubber Boot (P/N: MA-ODSS-M17S)

 22-pin Wiring Harness (P/N: MA-AC-22PF)

 4-pin Extension Cable(s)

 “U-Bracket” Mount and Thumb Screws

 Dash Mount Bracket

 In Dash Flush Mount and Removal Tool

 Sun Shield

 Remote Control

Optional Items and Accessories

 VisionStat™ Truck & Trailer Interconnect System

 One Camera (P/N: MA-BCKS-TTC7)

 Up to Four Cameras (P/N: MA-BCKS-4CTTC7)

 4-pin Extension Cables

 5M (P/N: MA-EC-405)

 10M (P/N: MA-EC-410)

 20M (P/N: MA-EC-420)

 4 Channel DVR (P/N: MA-DVR4-SD)

 Quad Touch Screen Monitor (P/N: MA-LCDS-7.0QT)

 Various Cameras

 Metal Under Bumper Sensor Mounts (P/N: MA-ODSS-M17SM)

 SE Enhanced Sensor Mounts - If Purchased as SE System or can be added later

 SE Mount with Sensor (P/N: MA-ODSS-M17SE)

 SE Mount only (P/N: MA-ODSS-M17SE-M)

 5M Sensor Extension Cable (P/N: MA-ODSS-M17-SCE)

 Both Wired and Wireless Systems

 Connects between ECU and Sensor

Please visit www.mobileawareness.com for all options, accessories and additional information.

Mobile Awareness

About the Monitor

The VisionStat Plus Monitor is a colored TFT LCD Monitor with a wide angle view and

a high resolution display. It supports both PAL and NTSC formats and the menu is

available in 8 languages. The buttons are equipped with automatic backlighting. The

Monitor can support up to 4 Cameras and can automatically switch to a specific Cam-

era view via the trigger wires. The Monitor also includes a built in speaker and a full

function remote control.

The VisionStat Plus Monitor is available in two sizes, 5.6” and 7.0”.

Fig 2: 7.0” Wired Monitor

Fig 1: 5.6” Wired Monitor

The VisionStat Plus system will combine

both the Camera feed and Sensor infor-

mation., by superimposing the Sensor infor-

mation onto the Camera feed and providing

them as a single view on the Monitor.

In Figure 3, the Camera provides an image

of the man walking behind the vehicle,

while the Sensors detect his distance and

provide distance reading on the Monitor.

Since the man is within 4’ 8”, in this exam-

ple, the Monitor will beep, alerting the driv-

er.

Fig 4: Superimposed Image

Fig 3: The VisionStat Plus System

VisionStat Plus Video Monitoring and Obstacle Detection Sensor System

The standard Camera issued with the system is the 18IR

Camera which has a 120 degree viewing angle and is

rated IP68. This Camera comes equipped with 18 infrared

LEDs to provide night vision up to 12 meters. It is

mounted on a “U-Bracket” which allows the user to angle

the Camera up or down.

The Side Camera is typically featured in triple Camera

systems. This Camera comes equipped with 9 infrared

LEDs to provide night vision up to 8 meters. The

mounting bracket and protective cover is included with the

Camera.

For other Camera options and information, please visit

www.mobileawareness.com.

About the Cameras

Fig 5: 18IR Camera

Fig 6: Side Camera

The Electronic Control Unit (ECU) is an intelligent microcontroller system with four (4)

individual Sensor inputs, all contained in a waterproof enclosure. There are four (4)

integrated cables labeled S1, S2, S3 and S4, which will connect to the four (4) each

Sensor Units. There are two mounting holes for securing the ECU, either inside or out-

side, at the rear of the vehicle. Since the ECU is watertight, it can be installed under-

neath the vehicle to facilitate the installation.

NOTE: Cable S1 & S4 = 9 2/3 ft (2.95M) long, S2 & S3 = 8 ft (2.45M) long

Fig 7: VisionStat Plus ECU

About the ECU:

About the Sensors

The Sensor Unit consists of a waterproof ultrasonic transducer designed for high accu-

racy measurement. The standard mount consists of a rubber sleeve, set in a metal

mounting bracket for under the bumper mount. Eight (8) holes are drilled to attach the

four (4) each mounts with the enclosed stainless steel mounting screws. The Sensors

are labeled S1, S2, S3 & S4 to match the waterproof threaded connectors which have

an O-ring seal. Sensors can also be mounted directly in the bumper using the rubber

sleeve or the optional SE Sensor Mount hardware.

Mobile Awareness

Installation: Monitor and Wiring Harness

Before installing the system, it is recommended

to temporarily connect all components and

perform a system function check. If the system

does not operate properly, see the

troubleshooting section of this manual. If further

questions arise, please visit

www.mobileawareness.com or contact Mobile

Awareness directly.

The Monitor can be flush mounted in the dash

(with the included mount), with the “U-Bracket” and

thumb screws (see Figure 11) or via the Dash

Mount Bracket (see Figure 12). Make sure the

mounting location does not obscure the drivers

viewing area.

NOTE: For other mounting options, please visit

www.mobileawareness.com

Fig 11: U - Bracket and Thumb

The VisionStat Plus system includes a 22-pin wiring harness. This wiring harness will

power the entire system, including the Monitor and up to 4 Cameras. Once the Monitor

is mounted, align the Monitor’s 22-pin

connection with the 22-pin connection of

the wiring harness. Each connector will

have an arrow to assist with the

alignment.

Once engaged, slowly rotate the metal ring to thread the two connectors together. This

should be done with caution so that the connectors seat and thread together properly.

You may need to continue pressing the connectors together while rotating the metal

ring to facilitate the assembly. Following these steps will ensure the connection has

been made correctly. Failing to do so may cause problems with power, audio and

video connections. Twisting the cable, or the connectors themselves, to tighten the

connection may result in breakage of the pins and their connections, rendering the

wiring harness defective.

Fig 12: Dash Mount Bracket

Fig 13: 22-pin Wiring Harness

Fig 8: Sensor in Metal

Bracket Fig 9: Sensor, Rubber

Sleeve & Metal Bracket Fig 10: Waterproof Thread-

ed Sensor Connectors

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente