Foreword
Congratulations on the purchase of your SMC55.
This manual will provide you with all the information you need about the installation,
use and maintenance of the system.
The SMC55 has been exclusively developed for use on inland waterways.
The system allows optimal enjoyment of the tremendous variety of radio and TV
programmes currently on offer via geostationary satellites, under way as well as in
port.
The use of high grade materials like stainless steel and durable plastics has been
maximised to ensure a long service life. Maintenance is also minimal, thanks to the
use of stepping motors and toothed belt transmissions.
WARNINGS AND REMARKS
All data is current at the time of going to press.
VISIOSAT shall not be liable in any
way for errors made during the drafting of this manual.
VISIOSAT retain the right to introduce any changes deemed necessary due to
product development and to introduce any necessary amendments to the installation,
to this user manual or to the products described in it, without prior notice.
Read this installation and user manual before using your SMC55 NAUTIC for the first
time. Carefully follow the instructions and take note of all warnings appearing on the
equipment and in this user manual.
Installation and service must be carried out exclusively by qualified persons.
There are no components within the installation which require service by the user.
Satisfy yourself that the wiring has been correctly connected before taking the
equipment into use.
Switch off and disconnect the power supply before carrying out any maintenance on
the system.
When opening the dome, bear in mind that that the dish antenna can move suddenly
and without warning unless the power supply is disconnected.
The dome must not be cleaned using a high pressure water jet. A soft damp cloth
with soap solution should be used instead.
