Visonic PowerMax Partitions II Manuale utente

A quick start guide to

PowerMax Partitions II

Product Management Team

April, 2010

What Are Partitions?

• The PowerMax includes an optional partition feature. Partitioning

allows you to have up to three independently controllable areas

whereby each can be in the HOME, AWAY or DISARM state.

• Each independent area is called a ‘partition’ and has its own

defined zones, user codes, etc.

• Partitions provide highly flexible control in premises where multiple

areas need to be monitored or secured independently.

Using Partitions in the Workplace

• The area in this example has 2 offices (accountant’s and solicitor’s)

• Each office runs independently with different working hours

• The reception area is shared by both offices

• Each area has a NEXT motion detector installed

The reception area is explained later in the ‘common area’ section

Accountants Solicitors

Reception

Partition 1 Partition 2

Common area

Partitions II – What’s New?

• Partitions II, Visonic's new version of partitioning, now provides

enhanced partitioning capabilities of the PowerMaxPro, including:

• Common areas

• Simultaneous control over multiple partitions

• Intuitive LCD display

• Smart siren operation

STEP 1: Planning & Enabling

• The panel comes with partitioning feature disabled.

• The first step is to enable Partitions II feature:

• From the INSTALLER MODE select PARTITIONING

and press

• Select ENABLE and press twice

To avoid confusion and to make installation simpler, it is recommended to

note down the zones and their corresponding partitions

STEP 2: Defining Partitions

• Partitioning programming is performed via the DEFINE ZONES menu.

• For each zone, set the zone type, name and chime option, as per the

installer manual.

• Select the PARTITION option (follows CHIME)

• The screen will display [ P1:- P2:- P3:-] Black squares indicate the

partitions to which the current zone is assigned.

• Assign the zone to its proper partition or partitions (1, 2, or 3).

• To select partitions simply press , or on the keypad

respectively.

• Press twice to confirm the settings.

A zone must be assigned to at least one partition at all times

STEP 3: Setting User Codes & Keyfobs

• User code 1 is the master user code and controls all 3 partitions.

• Other user codes can control only a specific partition or a

combination of partitions defined by the master user during setup.

• After selecting and defining user codes, select the

ACCESS TO PART menu to associate the user code with a

partition or a partition combination.

• Keyfobs are associated with a partition or a partition

combination during enrolment, performed via the

ENROLLING menu

To change the partition association of keyfobs

simply re-enroll the keyfob

Arming and Disarming the System

• A user, using a user code or an

MCT-237 two-way keyfob, can control

all partitions associated with the code

or keyfob simultaneously, or an

individual partition

• When using MCT-234 keyfob or the

MCM-140 remote commander, a user

can only control all the associated

partition(s) simultaneously

(i.e. no control over individual partitions). MCT-234

MCT-237

MKP-150

MCM-140+

MCM-140

Arming multiple partitions

• Arm or Disarm as without partitions

• All partitions associated with the

user code are Armed or Disarmed

Arming a specific partition

1. Press

2. LCD will show SELECT PARTITION

3. Press 1, 2, or 3 to select the partition

4. Press / (Arm) or

(Disarm)

PowerMax & MKP-150/151 Keypad

Partition Select Button

MCT-237 Two-way Keyfob

Arming multiple partitions

• Pressing the arming buttons without selecting an

individual partition Arms/Disarms all defined partitions.

Arming a specific partition

1. Press

2. In the LCD display, a digit [ P1:- P2:- P3:-]

will light to indicate the currently selected partition

3. Repeated pressing of selects the following

partitions

4. Press , or within 5 seconds

Partition Select Button

Altri manuali per PowerMax Partitions II

Indice

Altri manuali Visonic Sistema di sicurezza

Visonic

Visonic POWERMAX PRO Istruzioni per il montaggio

Visonic

Visonic PowerMaster 360 Istruzioni per il montaggio

Visonic

Visonic MCS-730 Manuale utente

Visonic

Visonic POWERMAX PRO Istruzioni per il montaggio

Visonic

Visonic POWERMAXCOMPLETE PANEL - Istruzioni per il montaggio

Visonic

Visonic AMBER SELECT Manuale utente

Visonic

Visonic PowerMax Complete Istruzioni per l’uso

Visonic

Visonic PowerMax Plus Manuale utente

Visonic

Visonic POWERMAXCOMPLETE PANEL - Istruzioni per il montaggio

Visonic

Visonic PowerMaster-10 G2 Manuale di istruzioni

Visonic

Visonic PowerMaster-10 G2 Manuale utente

Visonic

Visonic POWERMAX - Istruzioni per l’uso

Visonic

Visonic MCS-720 Manuale utente

Visonic

Visonic SR-720 PG2 Manuale utente

Visonic

Visonic PowerMaster-10 G2 Manuale utente

Visonic

Visonic MAESTRO-1600 Manuale utente

Visonic

Visonic KF-234 PG2 - Manuale utente

Visonic

Visonic POWERMASTER-10 Istruzioni per il montaggio

Visonic

Visonic SR-730 PG2 - Manuale utente

Visonic

Visonic POWERMAXEXPRESS - Istruzioni per il montaggio

Visonic

Visonic POWERMASTER-10 Manuale utente

Visonic

Visonic POWERMAX - Manuale utente

Visonic

Visonic TOWER 10 AM - Manuale utente

Visonic

Visonic POWERMASTER-10 Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente