vissonic VIS-CATC-A Manuale utente
VIS-CATC-A Camera Auto Tracking Controller
User Manual
V2.0
VISSONIC ELECTRONICS LIMITED
www.vissonic.com
2
The meaning of symbols
■Safety instructions
For your safe and correct use of equipments, we use a lot of symbols on the equipments and in the manuals,
demonstrating the risk of body hurt or possible damage to property for the user or others. Indications and their
meanings are as follow. Please make sure to correctly understand these instructions before reading the manual.
This is A level product, which may cause radio interference in the living environment.
In this case, users may need to take the feasible measures to get around the
interference.
Remind users that the dangerous voltage without insulation occurring within the
equipment may cause people suffer from shock.
CE certification means that the product has reached the directive safety requirements
defined by the European Union. Users can be assured about the use of it.
SGS certification means that the product has reached the quality inspection standards
proposed by the world's largest SGS.
This product passed the ISO9001 international quality certification (certification body:
TUV Rheinland, Germany).
Warning: in order to avoid electrical shock, do not open the machine cover, nor is the
useless part allowed to be placed in the box. Please contact the qualified service
personnel.
■ General information instructions
It lists the factors leading to the unsuccessful operation or set and the relevant
information to pay attention.
www.vissonic.com
3
Important note
Warning
In order to ensure the reliable performance of the
equipment and the safety of the user, please observe
the following matters during the process of
installation, use and maintenance:
The matters needing attention of installation
◆Please do not use this product in the following
places: the place of dust, soot and electric
conductivity dust, corrosive gas, combustible gas; the
place exposed to high temperature, condensation,
wind and rain; the occasion of vibration and impact.
Electric shock, fire, wrong operation can lead to
damage and deterioration to the product, either;
◆In processing the screw holes and wiring, make
sure that metal scraps and wire head will not fall into
the shaft of controller, as it could cause a fire, fault,
or incorrect operation;
◆When the installation work is over, it should be
assured there is nothing on the ventilated face,
including packaging items like dust paper. Otherwise,
this may cause a fire, fault, incorrect operation for the
cooling is not free;
◆Should avoid wiring and inserting cable plug in
charged state, otherwise it is easy to cause the shock,
or electrical damage;
◆The installation and wiring should be strong and
reliable, contact undesirable may lead to false action;
◆For a serious interference in applications, should
choose shield cable as the high frequency signal input
or output cable, so as to improve the anti-jamming
ability of the system.
Attention in the wiring
◆Only after cutting down all external power source,
can install, wiring operation begin, or it may cause
electric shock or equipment damage;
◆This product grounds by the grounding wires. To
avoid electric shocks, grounding wires and the earth
must be linked together. Before the connection of
input or output terminal, please make sure this
product is correctly grounded;
◆Immediately remove all other things after the
wiring installation. Please cover the terminals of the
products cover before electrification so as to avoid
cause electric shock.
Matters needing attention during operation and
maintenance
◆Please do not touch terminals in a current state, or it
may cause a shock, incorrect operation;
◆Please do cleaning and terminal tighten work after
turning off the power supply. These operations can
lead to electric shock in a current state;
◆Please do the connection or dismantle work of the
communication signal cable, the expansion module
cable or control unit cable after turning off the power
supply, or it may cause damage to the equipment,
incorrect operation;
◆Please do not dismantle the equipment, avoid
damaging the internal electrical component;
◆Should be sure to read the manual, fully confirm
the safety, only after that can do program changes,
commissioning, start and stop operation.
Matters needing attention in discarding product
◆Electrolytic explosion: the burning of electrolytic
capacitor on circuit boards may lead to explosion;
◆Please collect and process according to the
classification, do not put into life garbage;
◆Please process it as industrial waste, or according to
the local environmental protection regulations.
www.vissonic.com
4
Preface
This manual mainly describes the use, performance parameters and troubleshooting of VIS-CATC-Acamera auto
tracking controller.
If the technical parameters and system usage in this manual are changed, the manufacturer will update the version of
the manual. Please use the latest user manual.
The copyright of the manual belongs to VISSONIC ELECTRONICS LIMITED. This manual is protected by the
Copyright Law of the People's Republic of China and other intellectual property laws and regulations. Without
permission, it is not allowed to copy part or all of the manual or modify this manual.
Version
Update
Date
1.0
released
2018.12.28
2.0
Update interface and web
function
2023.7.28
www.vissonic.com
5
Contents
1. Function.....................................................................................................................................................................6
2. Specifications.............................................................................................................................................................7
3. Frontand rear panel description..................................................................................................................................8
4. Installation.................................................................................................................................................................9
4.1 19-inch installation cabinet..............................................................................................................................9
5. Connection...............................................................................................................................................................10
5.1 Power supply..................................................................................................................................................10
5.2 RS232 control interface .................................................................................................................................10
6. Web Control.............................................................................................................................................................12
7. System connection diagram.....................................................................................................................................15
7.1 Camera RS232 cascade control line connection method ...............................................................................15
7.2 Conference Controller--Camera Tracking Settings.......................................................................................16
www.vissonic.com
6
1. Function
VIS-CATC-A camera auto tracking controller has 4 channels of high-definition SDI input, 2 channels of
high-definition HDMI input, 2 channels of high-definition HDMI output, supports buttons, RS232 control, Ethernet
control, web page control, etc., and can realize camera tracking, seamless switching, Screen freezing, audio and
video scale conversion functions.
www.vissonic.com
7
2. Specifications
The Specification of VIS-CATC-A are as follows:
a) Video input port: 4-channel SDI HD interface; (SDI supports 3G-SDI andHD-SDI; supports digital
audio input)
b) Video input port: 2-channel HDMI HD interface; (HDMI supports 1080P60Hzdownward
compatibility; supports digital audio input)
c) Video input port：2-channel HDMI HD interface; (HDMI supports 1080P60Hzdownward
compatibility; supports digital audio output)
d) It has a picture freezing function, which can be set according to the rotation and focusing time of
different cameras.
e) Compatible with VISSONIC series conference system, support camera tracking function.
f) Video signal input to output seamless switching, no black screen, tearing.
g) Supports quick configuration of video signal switching through the web GUI.
h) Powerconsumption：12W
i) Powersupply：AC 100-240V 50-60 Hz
j) Temperature/Humidity：
Storage: -40 to +158 °F (-40 to +70 °C)/10% to 90%, non-condensing;
Operating: +32 to +122 °F (0 to +50 °C)/10% to 90%, non-condensing.
k) Installation：19-inch rack cabinet Installation, 1U
l) Dimensions (L × W × H)：483 × 260 × 43.6 mm
m) Weight：3kg
n) Color：black
www.vissonic.com
8
3. Frontand rear panel description
Figure 3 VIS-CATC-A front and rear panel
The front panel of camera auto tracking controller includes:
1. Power switch - turn the power of the camera tracking controller on or off
2. Control button - 1 - 6 button corresponds to 1 - 6 HDMI and SDI input channels, can switch any 1 HDMI or
SDI input signal to HDMI output
3. Input signal indicator - 1 - 6 indicator corresponds to 1 - 6 HDMI and SDI input channels
4. Input port - support 2 channels of high-definition HDMI and 4 channels of high-definition SDI signal input
5. Output port: support 2 channels of high-definition HDMI signal output
6. Control port - RS-232 female, RS-232 male and RJ45 Ethernet is used to connect the full digital network DSP
conference controller for video switching control of camera tracking or connect the computer for control
7. Power input port - connect the camera tracking controller to the power sequencer or plug-in with the power
cable to supply power to the camera tracking controller
*(HDMI and SDI input interface supports digital audio input, HDMI output interface supports digital audio
output)
www.vissonic.com
9
4. Installation
4.1 19-inch installation cabinet
The main unit can be installed in a 19-inch standard cabinet with standard mounting screw holes.
www.vissonic.com
10
5. Connection
5.1 Power supply
Connect the main unit to an external power outlet using the supplied power cord.
5.2 RS232 control interface
Figure 5.2.1 RS232 female
It is used to connect the digital network DSP conference main unit for video switching control of
camera tracking or connect the computer for control.
The COM port pins are defined as follows:
Pin
Signal
Description
Pin
Signal
Description
1
-
Null
6
-
Null
2
TXD
Send data
7
-
Null
3
RXD
Receive data
8
-
Null
4
-
Null
9
-
Null
5
GND
Signal ground
Altri manuali per VIS-CATC-A
1
Indice
Altri manuali vissonic Controllori
