Vista 1080BIR35V16e Manuale utente

Please read this manual thoroughly before use, and keep it handy for future reference.

VK2-1080BIR35V16e

Quick Guide

Quick Installation Guide

VK2-1080BIR35V16e Quick guide V1.0

Quick Installation Guide

VK2-1080BIR35V16e Quick guide V1.0

1. Description

This manual applies to the VK2-1080BIR35V16e full HD Bullet camera with IR illumination.

• Installation Steps

Follow these steps to install the VK2-1080BIR35V16e on your local network (LAN):

1. Check the package contents against the list below.

2. Connect the VK2-1080BIR35V16e

3. Set an IP address.

4. Set the password.

• Package Component

The system comes with the following components:

Camera Unit Installation CD Installation Guide Accessory Kit

• Contents in the installation CD

1. The User’s Manual

2. The SmartManager User’s Manual

3. The VK2-Client User’s Manual

4. The SmartManager Installation software

5. The VK2-Client Installation software

Note:Check the packaging to make sure that you received the complete system, including all

components shown above.

• Connection Cable

Quick Installation Guide

VK2-1080BIR35V16e Quick guide V1.0

Camera Dimension

See the diagrams below for the exact dimension

Dimensions Unit: mm

Base Installation(Cable through the wall or ceiling with the mount base)

Secure the camera to the wall or ceiling by the camera bracket and 3 screws.

2. Installation

2.1 Connection

• Connecting to the RJ-45

Connect a standard RJ-45 cable to the network port of the network camera. Generally a

cross-over cable is used for directly connection to PC, while a direct cable is used for connection

to a switch.

Micro SD memory slot

Remove the front cap of the camera to insert the SD memory card.

Name

Description

Power Cable

Cable for Power source (DC 12V)

Ethernet Cable

Cable for Ethernet (POE)

Quick Installation Guide

VK2-1080BIR35V16e Quick guide V1.0

• Connecting the Power

If the switch is not PoE device connect the DC 12V power adaptor to the camera.

2.2 Network Connection and IP assignment

When the camera is first connected to the network it has a default IP address. So, it is necessary to

allocate an IP address to the device with the “Smart Manager” utility on the CD. The factory default IP

is “192.168.30.220”.

1. Connect the VK2-1080BIR35V16e / device to the network and power up.

2. Start SmartManager utility (Start>All programs>SmartManager>SmartManager), the main window

will be displayed, after a short while any network devices connected to the network will be

displayed in the list.

Quick Installation Guide

VK2-1080BIR35V16e Quick guide V1.0

3. Select the camera on the list and click the right button of the mouse. You will see the pop-up

menu below.

4. Select Assign IP. You cam see a Assign IP window. Enter the required IP address.

Note: For more information, refer to the Smart Manger User’s Manual.

3. Operation

The VK2-1080BIR35V16e can be used with Windows operating system and browsers. The

recommended browsers are Internet Explorer, Safari, Firefox, Opera and Google Chrome with

Windows.

3.1 Access from a browser

1. Start a browser (Internet Explorer).

2. Enter the IP address or host name of the VK2-1080BIR35V16e in the Location/Address field of

your browser.

3. You will see the following start page. Click Live View or Setup to enter web page.

Quick Installation Guide

VK2-1080BIR35V16e Quick guide V1.0

4. The network camera’s Live View page appears in your browser.

3.2. Access from the internet

Access from the internet once connected, the VK2-1080BIR35V16e is accessible on your local

network (LAN). To access the VK2-1080BIR35V16e from the Internet you must configure your

broadband router to allow incoming data traffic to the network camera. To do this, enable the NAT-

traversal feature, which will attempt to automatically configure the router to allow access to the

network camera. This is enabled from Setup > System > Network > NAT.

For more information, please see “3.5.6 System>Network>NAT” of User’s Manual.

3.3 Setting the admin password over a secure connection

To gain access to the product, the password for

the default administrator user must be set. This is

done in the “Admin Password” dialog, which is

displayed when the VK2-1080BIR35V16e is

accessed for the setup at the first time. Enter

your admin name and password, set by the

administrator.

Note: The default administrator username and

password is “admin”. If the password is lost, the

VK2-1080BIR35V16e must be reset to the factory

default settings. See “3.6 Resetting to the Factory

Default Settings”.

Quick Installation Guide

VK2-1080BIR35V16e Quick guide V1.0

3.4 Live View Page

The live view page comes in several

screen modes: 1920x1080, 1280x1024,

1280x720, 704x480(576), 640x480,

352x240(288) and 320x240. Users are

allowed to select the most suitable one out

of those modes. Please, adjust the mode in

accordance with your PC specifications

and monitoring purposes.

1) General controls

Live View Page Search & Playback Page Setup Page Help Page

The video drop-down list allows you to select a customized or pre-programmed

video stream on the live view page. Stream profiles are configured under Setup > Basic

Configuration > Video & Image. For more information, please see “3.5.1 Basic Configuration >

Video & Image” of User’s Manual.

The resolution drop-down list allows you to select the most suitable one

out of video resolutions to be displayed on live view page.

The protocol drop-down list allows you to select which combination of

protocols and methods to use depends on your viewing requirements, and on the properties of

your network.

2) Control toolbar

The live viewer toolbar is available in the web browser page only. It displays the following buttons:

The Stop button stops the video stream being played. Pressing the key again toggles the

start and stop. The Start button connects to the VK2-1080BIR35V16e or start playing a

video stream.

The Pause button pause the video stream being played.

The Snapshot button takes a snapshot of the current image. The location where the

image is saved can be specified.

The digital zoom activates a zoom-in or zoom-out function for video image on the live

screen.

The Full Screen button causes the video image to fill the entire screen area. No other

windows will be visible. Press the 'Esc' button on the computer keyboard to cancel full

screen view.

Quick Installation Guide

VK2-1080BIR35V16e Quick guide V1.0

The Manual Trigger button activates a pop-up window to manually start or stop the event.

3) Video Streams

The VK2-1080BIR35V16e provides several images and video stream formats. Your requirements

and the properties of your network will determine the type you use.

The Live View page in the VK2-1080BIR35V16e provides access to H.264, MPEG-4 and Motion

JPEG video streams, and to the list of available video streams. Other applications and clients can

also access these video streams/images directly, without going via the Live View page.

3.5 VK2-1080BIR35V16e Setup

This section describes how to configure the network camera, and is intended for product

Administrators, who have unrestricted access to all the Setup tools; and Operators, who have access

to the settings for Basic, Live View, Video & Image, Event, and System Configuration.

You can configure the VK2-1080BIR35V16e by clicking Setup in the top right-hand corner of the Live

View page. Click on this page to access the online help that explains the setup tools

When accessing the VK2-1080BIR35V16e for the first time,

the “Admin Password” dialog appears. Enter your admin

name and password, set by the administrator.

Note: If the password is lost, the VK2-1080BIR35V16e

must be reset to the factory default settings.

See “3.6 Resetting to the Factory Default Settings”.

Quick Installation Guide

VK2-1080BIR35V16e Quick guide V1.0

3.6 Resetting to the factory default settings

To reset the VK2-1080BIR35V16e to the original factory settings, go to the Setup>System

>Maintenance web page (described in “3.5.6 System>Maintenance” of the User’s Manual) or use the

Reset button on the network camera, as described below:

Follow the instructions below to reset the VK2-1080BIR35V16e to the factory default settings using the

Reset button.

1. Switch off the VK2-1080BIR35V16e by disconnecting the power adapter.

2. Remove the front cap of the camera.

3. Press and hold the Reset button while reconnecting the power.

3. Keep the Reset button pressed during about 2 seconds or more than.

4. Release the Reset button.

5. The VK2-1080BIR35V16e resets to factory defaults and restarts after completing the factory

reset.

The unit now has the default IP address 192.168.30.220.

6. Close the front cap of the camera.

Caution: When performing a Factory Reset, you will lose any settings you have saved.

3.7 More Information

For more information, please see the VK2-1080BIR35V16e User’s Manual, which is available on the

CD included in this package.

Indice

Altri manuali Vista Telecamera di sicurezza

Vista

Vista VBC502-960H Manuale utente

Vista

Vista VK2-108VRDIR37e Manuale utente

Vista

Vista VPM8420 Manuale utente

Vista

Vista VBC400-600 Manuale utente

Vista

Vista VK2-2MPXBIR28V12M Manuale utente

Vista

Vista VK2-3MPBIR3V9F Manuale utente

Vista

Vista VK2 1080VRDIR3V9F Manuale utente

Vista

Vista VIP Series Manuale utente

Vista

Vista VLI-4ED28IRQ Manuale utente

Vista

Vista VK2-108VRDIR37e Manuale utente

Vista

Vista VK2-12MP360EXTIR Manuale utente

Vista

Vista VK2-1080VFDIR37e Manuale utente

Vista

Vista VLI-4ED28V12IRQ Manuale utente

Vista

Vista VK2-1080MD37W Manuale utente

Vista

Vista VFD13C/HR Manuale utente

Vista

Vista VK2-4KXVRDIR36V11M Manuale utente

Vista

Vista VFD4V9Me Manuale utente

Vista

Vista VEFED28V12MHDAW Manuale utente

Vista

Vista VK2-1080BIR37e Manuale utente

Vista

Vista VK2-1080XVRDPTZ Manuale utente

Vista

Vista Onvif VIP2 VK2-720VZMX Manuale utente

Vista

Vista VK2 Series Manuale utente

Vista

Vista VK2-3MPBIR28V12re Manuale utente

Vista

Vista VP960H Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente