Visual Comfort & Co. Studio Manuale utente
1. Carefully remove all parts from the box.
2. Put the card template to the desired location and mark the key hole points on the wall.
3. Remove the card template and drill holes on the wall and insert the anchors (A) into
the holes.
4. Insert the wood screws (B) to the anchors (A) and leave the threads 1/8” out.
5. Hook the fixture body (C) to the wood screws (B).
6. Install the cord cover rod (D) to the fixture body (C), then install the rod (E) to the rod (D)
and install the rod (F) to the rod (E).
7. Insert the bulb into the socket.
8. Install the shade (K) to the socket tube (J).
9. Remove the protective plug cover (H) from the plug (G).
10. Swing the arm (Y) and arm (X) to desired angle. Tighten the set screw (Q) using the
wrench (P) if needed.
11. Plug into a proper electrical outlet and test the fixture.
***Clean with a dry, soft cloth only. Use no harsh abrasives or chemical agents
Studio Swing Arm Wall Light
Item# 82034
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY
DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
NOTE: CAREFULLY UNPACK EACH PIECE IN TOP LAYER OF PACKING PRIOR TO
REMOVING. RETAIN ALL PACKING MATERIAL UNTIL INSPECTION AND
INSTALLATION ARE FINAL.
ASSEMBLY INSTRUCTIONS
US
L
I
D
S
E
T
M
DRY
Portable assembly
A
J
P
B
H
Q
K
C
D
E
F
G
Bulb included
Card template
X
Y
1. Carefully remove all parts from the box.
2. Remove the portable mounting plate from the fixture body (C) by unscrewing the side
screws (O).
3. Install the fixed mounting plate (M) to the junction box and secure with the mounting
screws (N).
4. Remove the portable cord and cord cover rods by loosening the wire nuts (I).
5. Insert the direct wire plug (S) into the wire exit on the bottom of the fixture body (C).
6. Wrap the fixture ground wire to the green ground screw on the mounting plate (M) and
secure, then connect to ground wire in the junction box using wire nut (I).
IT IS IMPERATIVE THAT THIS FIXTURE BE GROUNDED.
7. Connect the fixture white wire to neutral wire in the junction box using the wire nut (I)
8. Connect the fixture black wire to hot wire in the junction box using the wire nut (I)
DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OTHERWISE SAFETY
WILL BE COMPROMISED.
9. Install the fixture body (C) to the fixed mounting plate (M) and secure with the side
screws (O).
10. Insert the bulb into the socket.
11. Install the shade (K) to the socket tube (J).
12. Remove the protective plug cover (H) from the plug (G).
13. Swing the arm (Y) and arm (X) to desired angle. Tighten the set screw (Q) using the
wrench (P) if needed.
14. Plug into a proper electrical outlet and test the fixture.
***Clean with a dry, soft cloth only. Use no harsh abrasives or chemical agents...
Studio Swing Arm Wall Light
Item# 82034
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A
LICENSED ELECTRICIAN.
WARNING***SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN
FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY
DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
NOTE: CAREFULLY UNPACK EACH PIECE IN TOP LAYER OF PACKING PRIOR TO
REMOVING. RETAIN ALL PACKING MATERIAL UNTIL INSPECTION AND
INSTALLATION ARE FINAL.
ASSEMBLY INSTRUCTIONS
US
L
I
D
S
E
T
M
DRY
Hardwire assembly
S
MN C
OQ
XJ
K
IBulb included
P
Y
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Visual Comfort & Co. Apparecchio di illuminazione
Manuali Apparecchio di illuminazione popolari di altre marche
Emos
Emos CLASSIC ZY1431T Manuale utente
Westinghouse
Westinghouse Outdoor Lighting Fixture Manuale utente
Hedler
Hedler C 12 silent Manuale utente
Blizzard Lighting
Blizzard Lighting Puck: CSI Manuale utente
Energetic Lighting
Energetic Lighting ELYSL-5004 Series Manuale utente
Lightmaxx
Lightmaxx Shaft 5R Manuale utente
Cooper Lighting
Cooper Lighting Halo L3232E Manuale utente
Stageline
Stageline ODW-2410RGBW Manuale utente
Light Sky
Light Sky Tornado Series Manuale utente
Lightolier
Lightolier Paralyte 2424 PLA2G9LS26U Manuale utente
Lightolier
Lightolier Lytespan 83ED17S Manuale utente
Lightolier
Lightolier Calculite CS8226 Manuale utente