Installation View:
DH01
REMARK:
EDID: Extended display identification data is a data structure provided by a computer display
to describe its capabilities to a graphics card. It is what enables a modern personal computer
to know what kind of monitor is connected
Trouble Shooting:
1. If your monitor without audio function, then please setting the rotary switch at 6 (EDID
Default), force “audio output” to your external speaker.
2. Only HDMI enabled TV sets with underscan/overscan* support, the full active video can
be accurately displayed. Some HDMI equipped TV sets may not support this feature. If
underscan/overscan* is NOT supported, the top, bottom, left and right border of the
active video may be screened, and the S/PDIF audio may not sound right.
3. S/PDIF audio input can support up to 8-channel audio input. If your TV not support
Dolby Digital or dts audio decoding , then you will add audio decoder or amplifier.
4. S/PDIF supports only 48KHz audio sample rate. Other than this rate, the input digital
audio should be adjusted to 48KHz in order to get audio signal correctly sent.
Specification:
DVI-I 29 pin female (digital only)
HDMI Type A 19 PIN
RCA Connector: Coax SPDIF, Phone Jack: Analog stereo
