Vitec Multimedia CellCom 10 Manuale utente

DIGITAL WIRELESS MATRIX

INSTRUCTION MANUAL

CellCom 10

CellCom 10 Instruction Manual

Part Number 810335 Rev. A

Vitec Group Communications, Inc.

4065 Hollis Street

Emeryville, CA 94608-3505

U.S.A

Clear-Com is a registered trademark of Vitec Group Communications.

The Clear-Com Logo is a registered trademark of Vitec Group Communications.

CellCom 10 is a registered trademark of Vitec Group Communications.

Eclipse is a registered trademark of Vitec Group Communications.

CELLCOM 10 WIRELESS COMMUNICATION SYSTEM i

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . .V

GETTING STARTED: AN INTRODUCTION TO CELLCOM 10 . . . . . . . . . . . . . . 1-1

CellCom 10 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

A CellCom 10 Communication System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

QUICK START . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

OPERATING THE CELLCOM 10 BASE STATION . . . . . . . . . . . . . . . . . . . . 3-1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Understanding Front-Panel Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

CONNECTING THE CELLCOM 10 BASE STATION . . . . . . . . . . . . . . . . . . . 4-1

Understanding the Back-Panel Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Connecting to Party-Line Intercom Systems . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Connecting to 4-Wire and Digital Matrix Intercom . . . . . . . . . . . . . . . . . . . 4-6

Connecting to a Program Audio Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

Connecting to the Stage Announce Output. . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

Connecting to a PC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

Linking Two Base Stations to Form Larger Systems . . . . . . . . . . . . . . . . . . . 4-11

Connecting to Transceiver/Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

PROGRAMMING A SYSTEM FROM THE BASE STATION . . . . . . . . . . . . . . . . 5-1

A Note About Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Using the Base Station’s Programming Menus . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Saving Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Creating Beltpack Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Creating Port Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

Creating Group Labels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Adding Group Members . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

Assigning Labels to Beltpacks Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

Setting Input and Output Audio Levels. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10

Selecting Party Line Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10

Base Station SYSTEM Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11

CELLCOM 10 WIRELESS COMMUNICATION SYSTEM

OPERATING THE CELLCOM 10 WIRELESS BELTPACK . . . . . . . . . . . . . . . . 6-1

Overview of the Wireless Belpack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Accessing the Talk Paths on the CellCom 10 Beltpack. . . . . . . . . . . . . . . . . . 6-7

Beltpack Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10

OPERATING THE CELLCOM 10 TRANSCEIVER/ANTENNA . . . . . . . . . . . . . . . 7-1

Transceiver/Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

Transceiver/Antenna Splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4

INSTALLING A SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

Initial System Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

Doing a Site Survey to Determine Coverage Areas. . . . . . . . . . . . . . . . . . . . . 8-2

SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1

APPENDIX 1: DECT CARRIER FREQUENCY CHART . . . . . . . . . . . . . . . . . . 10-1

APPENDIX 2: OVERVIEW OF PROGRAMMING MENUS . . . . . . . . . . . . . . . . 11-1

VITEC GROUP COMMUNICATIONS WARRANTY. . . . . . . . . . . . . . . . . . . . . 12-1

Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1

Warranty Repairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-2

Non-Warranty Repairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-2

CELLCOM 10 WIRELESS COMMUNICATION SYSTEM v

IMPORTANT SAFETY INSTRUCTIONS

Please read and follow these instructions before operating a CellCom 10 wireless

communication system. Keep these instructions for future reference.

(1) WARNING: To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture.

(2) Do not use the apparatus near water.

(3) Clean only with a dry cloth.

(4) Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions. Install the CellCom 10 wireless communication

system according to the directions in the Installation Chapter of this manual.

(5) Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat. Do not place naked

flame sources such as candles on or near the matrix.

(6) Do not defeat the safety purpose of the polarized plug or grounding-type

plug. A polarized plug has two blades with one wider than the other. A

grounding-type plug has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for replacement of the obsolete

outlet.

(7) Protect power leads from being walked on or pinched particularly at plugs, at

convenience receptacles, and at the point where they exit from the apparatus.

Note: A “convenience receptacle” is an extra AC power outlet located on the back

of a piece of equipment, intended to allow you to power other equipment.

(8) Only use attachments/accessories specified by the manufacturer.

(9) Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury from tip-over.

(10) Unplug the apparatus during lightning storms or when unused for long

periods of time.

(11) Refer all servicing to qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as a power-supply cord or plug

is damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

(12) The CellCom 10 wireless communication system contains a non-user

serviceable battery.

Please read and follow these

instructions before operating

a CellCom 10 wireless

communication system.

CELLCOM 10 WIRELESS COMMUNICATION SYSTEM

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type.

Lithium batteries can overheat or explode if they are shorted. When you handle

the CPU card or a loose battery, DO NOT touch any external electrical

conductors to the battery’s terminals or to the circuits that the terminals are

connected to.

Please familiarize yourself with the safety symbols in Figure 1. When you see

these symbols on a CellCom 10 wireless communication system, they warn you

of the potential danger of electric shock if the system is used improperly. They

also refer you to important operating and maintenance instructions in the

manual.

Figure 1: Safety Symbols

EMC AND SAFETY

The CellCom 10 wireless communication system meets all relevant CE, FCC,

UL, and CSA specifications set out below:

EN55103-1 Electromagnetic compatibility. Product family standard for audio,

video, audio-visual, and entertainment lighting control apparatus for professional

use. Part 1: Emissions.

EN55103-2 Electromagnetic compatibility. Product family standard for audio,

video, audio-visual, and entertainment lighting control apparatus for professional

use. Part 2: Immunity.

BS EN 60065:2002 Audio, video, and similar electronic apparatus. Safety

requirements.

And thereby compliance with the requirement of Electromagnetic Compatibility

Directive 89/336/EEC and Low Voltage Directive 73/23/EEC as amended by

93/68/EEC.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol alerts you to the presence of uninsulated dangerous

voltage within the product’s enclosure that might be of sufficient

magnitude to constitute a risk of electric shock. Do not open

the product’s case.

This symbol informs you that important operating and main-

tenance instructions are included in the literature accompanying

this product.

CELLCOM 10 WIRELESS COMMUNICATION SYSTEM vii

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CELLCOM 10 WIRELESS COMMUNICATION SYSTEM

viii

CELLCOM 10 WIRELESS COMMUNICATION SYSTEM 1-1

GETTING STARTED: AN

INTRODUCTION TO CELLCOM 10

With a CellCom 10 wireless beltpack you can roam freely around a studio or

production facility while talking and listening to all, or selected, members of the

production team. With its six communication routes, the beltpack gives you the

flexibility to communicate quickly and seamlessly with individuals or groups,

and to change communication routes as often as needed.

CellCom 10™ is the North American name for the award-winning FreeSpeak®

technology, the world’s first wireless system to include local route programming,

crosspoint level control, assignment of IFBs, groups, and full non-blocking

mixing facilities.

In the United States the system operates in the unlicensed 1.92 GHz to 1.93

GHz band. With its unique and innovative digital technology, which continually

searches for unused radio frequency (RF) channels, CellCom avoids the noise

and interference issues associated with traditional wireless systems using

congested UHF and VHF bands.

Figure 1: A CellCom 10 Antenna, Beltpack, and Base Station

CellCom 10 allows you to set up a wireless system specifically tailored to your

needs, by locating antennas and beltpacks in areas where they are needed most.

And because the beltpacks operate in the unlicensed 1.92 to 1.93 GHz

frequency spectrum, there is no interference with existing wireless systems, even

those located in the same production area.

CellCom 10 may be used stand-alone or connected with party-line and/or digital

matrix intercom systems. The base station holds connections for several wired

interfaces, including party lines, 4-wire sources, a program audio source, and a

stage announce output device. When wired to the base station, these devices

A CellCom 10 system

consists of three basic

elements: the base station,

wireless beltpack, and

antenna.

With the basic three

elements you can design a

digital wireless system for

your specific requirements.

CELLCOM 10 WIRELESS COMMUNICATION SYSTEM

1-2

communicate seamlessly with the wireless beltpacks. Party-line beltpacks and

4-wire matrix stations and panels can key directly to wireless beltpack by name.

CELLCOM 10 FEATURES

Features of CellCom 10 include:

• Base station in one rack unit (1 RU).

• Up to ten wireless beltpacks.

• Point-to-point and small group wireless communications.

• Up to six communication routes per beltpack.

• Party-line beltpacks, 4-wire devices, program audio source, and stage

announce output seamlessly included in communication system.

• Up to ten remote transceiver/antennas create custom coverage zones.

• Transceiver/antennas can be located up to 1,000 meters (3,200 feet) over

CAT-5 cable from the base station, avoiding expensive RF cable.

• Five-character labels for each beltpack and wired connection.

• Communication groups can be created, customized, and assigned to beltpack

keys.

• License-free operation in the1.9 GHz band—above television and other

wireless communications.

• Frequency-hopping DECT technology automatically finds clear spectrum.

• Base functions like a digital matrix; each beltpack has a “virtual port” timeslot.

• Secure system—beltpacks are registered to a particular base and can frequency

hop.

• Two bases can connect locally for a 20-beltpack system.

Figure 2: A CellCom 10 Digital Wireless Communication System

The CellCom 10 base

station functions as a

full-duplex digital matrix

switcher and router for voice

communications.

Each antenna can support

communications with up to

five wireless beltpacks

operating within its coverage

zone.

Indice

Altri manuali Vitec Multimedia Sistema di interfono

Vitec Multimedia

Vitec Multimedia ICS-102/62 Manuale utente

Manuali Sistema di interfono popolari di altre marche

Bticino

Bticino LINEA 3000 Manuale utente

MSI

MSI MSI-140 Manuale utente

golmar

golmar Stadio Plus Manuale utente

CyberData

CyberData 011211 series Manuale

Vidos

Vidos duo M1021 Manuale utente

Vimar

Vimar ELVOX 7539/E Manuale utente

SSS Siedle

SSS Siedle BTSV 850-03 Manuale utente

Dahua

Dahua VTO Series Manuale utente

Elvox

Elvox 5651 Manuale utente

Videx

Videx VIDEOKIT Series Manuale utente

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuale utente

Viking

Viking E-35-EWP Manuale utente

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuale utente

SSS Siedle

SSS Siedle BFCV 850 Series Manuale utente

GRD

GRD MAX V2 Manuale utente

Alecto

Alecto ADI-250 Manuale utente

Aiphone

Aiphone IE-8MD Manuale utente

Perel

Perel EDB4 Manuale utente