If there is user name but no password required, send as
*apn*AXXX* BXXX*
!
!
APN information can be checked on local telecom website.
!
You will receive the following text: "Notice: APN is set to XXX. User name: XX.
Password: XX”
!
!
5.2 Registering the “Master” Controller
SMS to the device: *master*123456*+1XXXXXXXXXXXX*, (For
instance, master controller phone number is +1XXXXXXXXXXXX. +1 refers to
the country code. XXXXXXXXXXXX is the cellphone number. Please make sure
country code is included, and digit 0 is not needed before cell phone number)
!
!
Device Response: "Notice: Cell Phone # xxxxxxxxxx is set to master
controller, the password is 123456.” (The device has a default password of
“123456” to initially program in your PDA/Phone.
!
NOTE: The device will ONLY listen and respond to instructions from this
number unless you choose to turn on the multi controller function and open
the device to any cell phone number（see NO.12 for details）.
!
!
!
5.3 Emergency takeover function:
With the proper password, any phone number could takeover of full
functionality under emergency situation.
SMS: *master*123456*+1XXXXXXXXXXX * (For instance, master
controller phone number is +1XXXXXXXXXXX. +1 refers to the country code.
XXXXXXXXXXXX is the cellphone number. Please make sure country code is
included, and 0 is not needed before cell phone number)
!
You will receive back a text that says: "Notice: Master controller change is
successful for +1XXXXXXXXXXX, the new master controller is
+1XXXXXXXXXXXX."
!
!
5.4 Changing the Password:
SMS: *password*654321* (654321 refers to new password)
You will receive the following text: "Notice: The password change is
successful for +1XXXXXXXXXX. The new password is 654321."
!
!
!
!
!
