Vogue Cosmic Manuale utente
COSMIC
SMARTWATCH
Thank you for choosing our
smartwatch. You can read this
manual and have a thorough
understanding of the use and
operaon of the equipment.
The Company reserves the right to
make changes to the contents of
this manual without prior noce.
Product includes: Package*1, Manual*1, Smart
Watch*1, Charger*1.
I. Funcon descripon of bracelet
1.1 Buon descripon:
A: Touch Screen/ Full
Touch Screen
B: Return Key/Long Press for Power on and o.
1.2 Charging instrucons: Magnec
charging is as shown below.
*Be aware that the two contacts
of the USB cable are not allowed
to contact the conductor at the
same me, or it will cause the
circuit to burn.
1.1 Dial plate interface in standby mode:
1) Swipe right to open the push message interface;
2) Swipe down to open the drop down menu which
displays brightness, remaining baery, Bluetooth con-
necon, and the Do not disturb mode.
3) Swipe le to measure heart rate.
4) Swipe up to open the main menu list interface;
5) Press and hold the dial plate interface in standby
mode to change the watch face. Swipe to select
interface, press to apply.
1.2 Push message.
Swipe right in the stand by interface to open the push
message interface. When the nocaon permission
is allowed, the new message received by the mobile
phone will be pushed to the bracelet. A total of 8 mes-
sages can be saved. Any other message received aer
the 8th, will overwrite the previously received one.
1.3 Drop-down menu
Swipe down the standby interface to open the drop-
down menu interface.
1) The le icon shows the Bluetooth connecon
status. The white icon means no Bluetooth connecon
has been established. The blue icon means a Blue-
tooth connecon has been established.
2) The middle icon shows the Do not disturb mode.
When it is on, the vibraon of the bracelet is acvated
only for “Find the bracelet” and the “Alarm” funcons.
Bear in mind that the Do not disturb funcon must
be acvated / deacvated through the app from the
mobile phone (FunDo Pro). Cannot be clicked on the
watch.
3) The right icon can be used to adjust the screen
brightness
1.4 Step count
The step count funcon is on by default. The interface
when accessed, displays the current number of steps
saved in the bracelet. This data is cleared everyday at
12 am. These sengs cannot be changed.
1.5 Sleep
Sleep monitoring me period is from 21:00 to 9:00 in
the next day. Aer the elapsed me menoned, the
bracelet generates the necessary data and automa-
cally exits the sleep monitoring funcon. Note that
the data from the bracelet must be synchronized with
the APP.
1.6 Bluetooth music
For Android devices: aer binding the bracelet with
the APP, open the music funcon on the bracelet.
Three choices will appear: Play/Pause, Next, Previous.
This funcon can also work without binding the device
through the APP, but directly with the mobile through
the Bluetooth sengs.
For IOs devices: Aer binding the bracelet with the
phone, open the music funcon on the bracelet.
1.7 Weather
The bracelet can display weather informaon from the
weather funcon. For it to work, the bracelet must
be connected with the phone through the APP. In
addion, the phone must be connected to a network
(Wi-Fi, GSM) and have the locaon services enabled.
1.8 Sports Modes
(walking, running, cycling, hiking, swimming, football,
basketball, table tennis, badminton.)
1.8.1 Select the sport you want and press the screen
to enter said sport funcon. Swipe right to jump to
the end of the sport interface. Press pause to return
to the sport interface, press “□” to end the sport and
save the data.
1.8.2 Data can be saved when the distance is either
greater than 200 meters or the duraon is longer than
5 minutes. If the above condions are not sased,
the message “the data is too lile to save” will be
prompted.
1.8.3 Aer the bracelet is bound to the APP, click the
synchronizaon opon in the FunDo Pro sports history
interface, to synchronize the data of the bracelet
with the APP. This method allows you to access more
detailed sports data within the APP.
1.9 Heart rate
Wear the bracelet correctly on the le / right wrist
and enter the heart rate menu for connuous mea-
surement of the heart rate. Aer the bracelet is bound
with the APP, the heart rate data is synchronized with
the APP in real me.
1.10 Blood pressure
Wear the bracelet correctly on the le / right wrist
and enter the blood pressure menu for a single mea-
surement of your blood pressure. Aer the bracelet
is bound with the APP, the data can be synchronized
with the APP in real me.
1.11 Blood oxygen
Wear the bracelet correctly on the le / right wrist
and enter the blood oxygen menu for a single mea-
surement of blood oxygen value. Aer the bracelet
is bound with the APP, the data can be synchronized
with the APP in real me.
1.12 Alarm clock
Bind bracelet to the APP and set synchronized alarm
clock in the app to the bracelet.
1.13 Sedentary reminder
Turn on / o sedentary reminder.
1.14 Stopwatch
Enter the ming interface by clicking stopwatch. Click
the start icon to start ming. Click again to pause it.
Swipe right to exit. When entering the stopwatch
again, the previous ming is cleared.
1.15 Find mobile phone
Press nd mobile phone from the bracelet to pop up a
prompt box to the mobile phone which will cause it to
vibrate. Must be bound with the APP.
1.16 Remote camera
Aer the bracelet is bound with the APP, press camera
in the APP which will show the remote camera icon
on the bracelet and will automacally turn on the
camera on the phone. Press the screen at the bracelet
to control the phone’s camera and snap photos which
are stored at the mobile phone.
1.17 Sengs
1.17.1 Sedentary reminder
It’s o by default. Aer connecng the APP, the on/o
funcon at app end can control the funcon at brace-
let end. This funcon can be manually turned on/o
at bracelet end, but the APP is not aected.
1.17.2 Raise to wake
It’s o by default. Aer connecng the APP, the on/o
funcon at app end can control the funcon at brace-
let end. This funcon can be manually turned on/o
at bracelet end, but the APP is not aected.
Altri manuali per Cosmic
1
Altri manuali Vogue Orologio
