5. Setting the cloc
- Press and hold the button until the minutes on the clock display start to flash.
- Use the or buttons to adjust the minutes.
- Press the button a ain and the hours will flash.
- Use the or buttons to adjust the hours.
- Press the button a ain and a line will flash below the days of the week.
- Use the or buttons to set the day (for example Monday can be day 1).
- To finish settin the clock press the button.
Operating the heating
The heatin can be operated in 3 ways (ensure the heatin mode selector is in the winter position). You
can use the button to switch between the three options:
Auto - the heatin will be ON only durin timed periods selected on the outer clock dial.
Man on - the heatin will be on 24 hours a day.
Man off - there is no heatin .
VOKERA VISION C
Setting the times for heating
The heatin ON times can be selected in half hour se ments on the outer dial of the clock. An ON
period is shown by an indicator block a ainst the hour or half hour and an OFF period has no block on
the dial.
- Press and hold the button until the display shows ‘PRO.’ The display will chan e to show the time
as 00:00. A block will flash by the first number on the outer dial and a line will appear beneath day 1.
You can now set the times for heatin on Monday be innin at midni ht.
- If you’d like the heatin be to ON at that time, press the button and if you’d like the heatin to
be OFF, press the button.
Note - each press of the or button sets ON or OFF periods then moves to the next half hour se ment and the
whole day is set in this way.
- Monday is now set. Once you have finished, press and the line will flash beneath day 2. If you want
to repeat the same heatin pattern for Tuesday, press and hold down button until the display
chan es.
- Repeat for each day of the week. When day 7 is complete, one last press of button will finish
settin the times and revert back to the normal clock display.
The central heating (radiator) temperature can easily be adjusted using the heating
temperature selector.
Rotate the temperature selector clockwise to increase the temperature and counter
clockwise to decrease the temperature - until you reach your desired settin . The
temperature can be set from a minimum of 40°C to a maximum of 80°C.