Volfoni Edge RF VPEG-03210 Manuale utente
REV.C 180
User Guide
Manuel d’utilisation
model
VPEG-03210
www.volfoni.com
3
SUMMARY
1. PRODUCT OVERVIEW 4.
1.1 DESCRIPTION 4.
1.2 SET UP OF ARMS 5.
1.3 PACKAGING COMPOSITION 5.
2. EDGETM RF FEATURES 6.
2.1 GENERAL SPECIFICATIONS 6.
2.2 TECHNICAL SPECIFICATION 6.
3. REQUIREMENTS 7.
3.1 ACTIVHUBTM RF50 OVERVIEW 7.
3.2 GENERAL SETUP 8.
4. USING YOUR EDGETM RF 9.
4.1 ON/OFF AND AUTO OFF 9.
4.2 SWITCH BUTTON 10.
4.3 BATTERY 10.
4.3.1 BATTERY LEVEL 10.
4.3.1 BATTERY CHARGE 11.
5. SOFTWARE UPDATES 11.
6. VOLFONI LOADER - PARAMETERS 12.
7. TROUBLESHOOTING 14.
8. IMPORTANT SAFETY RECOMMENDATIONS 15.
9. WARRANTY 16.
10. REGULATIONS 17.
11. MORE INFORMATION AND CONTACTS 18.
4 5
1. PRODUCT OVERVIEW
1.1 Description
EDGETM RF are active 3D glasses that use radio frequency
technology. These glasses synchronize with the RF signal
of the ActivHubTM RF50. As a result of Volfoni’s long
experience in managing the world’s largest stock of
active 3D glasses, the EDGETM line of glasses showcase
the latest in 3D technical innovations, with unmatched
comfort and ease-of-use.
The quality:
- These glasses use ultra-fast-response liquid crystal
lenses, which create the best image quality
- No silver screen required, high image quality preserved
at all seating positions
- Bright images and natural colors
The comfort:
- Volfoni’s ergonomic design
- Weighs only 56g
- Rubberized nosepiece and 3 sizes of adjustable arms
The efciency:
- Best-in-class lenses with high contrast and light
efciency
- Extremely stable, long-range usage due to radio
frequency
- Radio frequency synchronization avoids interference
from other devices
- Software programmable 3D glasses (dark time, delay...)
- Automatic power-off function (Auto OFF) saves energy
- Rechargeable glasses / Battery life up to 75 hours
- Three-positions switch : 3D, 3D reverse, dual view
1. ON/OFF button
2. Programmable 3-positions switch
3. MicroUSB (μUSB) connection (recharging and
updating)
4. Electronic component (with RF receiver)
5. Liquid crystal lenses (STN)
6. LED light
7. Interchangeable arms
8. Rubberized nosepiece
1.2 Set up of arms
1.3 Packaging composition
- EDGETM RF (x1)
- MicroUSB cable (x1)
- Removable arms, S, M, L (x3)
- User guide (x1)
- Microber cleaning wipe (x1)
3
7
2
5
8
4 - 6
1
6 7
2. EDGETM RF FEATURES
2.1 General Specications
- Stylish, ergonomic design
- Rubber nosepiece provides universal comfort
- Unbeatable luminosity and natural colors
- Wide receiving angle and extremely stable range
- Rechargeable battery (with μUSB/USB cable)
- Optimal circuit layout
- ON/OFF button
- 3 available sizes of removable arms (S, M, L)
2.2 Technical Specications
- Sync operation: Radio-Frequency
- Frequency: 2.4Ghz
- Compatible with all refresh-rates up to 220Hz (including
96, 120, 144 and 192Hz)
- Optic Transmission: 38%
- Residual light: 18.5%
- Contrast: > 940:1 (no ghosting)
- Chromaticity: Color correction not mandatory
- Weight: 56 grams
- Autonomy: 75 hours in use, auto OFF
- Range with an ActivHubTM: 30 meters maximum
- Operating Temperature: 0°C ~ +40°C (32F-104F)
- Storage Temperature: -10°C ~ +50°C (14F-122F)
- CE certied
3. REQUIREMENTS
3.1 ActivHubTM RF50 overview
ActivHub™ RF is a transmitter used to synchronize the
EDGE™ RF 3D glasses with protocols currently used.
1. USB connector
2. Jack 3.5 connector
3. IR & DLP-Link reception window
4. RF emission window
5. Function selector with the rotary wheel (12
positions)
6. Power and Function LED
5
12
3
4
5
6
8 9
- The ActivHubTM RF has several modes of operation (12),
selectable with the wheel. Please select position 8 to use
the EDGETM RF properly.
Auto test mode : position 0
Please note that positions 1 and 2 are not meant to be
used in the ActivHubTM RF50.
- When the conguration is ready, please stand in front
of the screen and press the On / Off button on your
glasses.
- The glasses will automatically search the
synchronization signal.
Once the glasses are synchronized, the LCD lenses will
ash ultra-fast. Then you can watch your 3D contentThe ActivHubTM can transmit RF synchronization when
connected to a VESA or BNC cable
The ActivHubTM can transmit RF synchronization when
receiving a DLP-LinkTM 3D signal.
3D Content
Movie, sports...
RF glasses
ActivHUB
3D Content
Movie, sports...
RF glasses
ActivHUB
In=Wire, Out=RF
In=DLP, Out=RF
4. USING YOUR EDGETM RF
4.1 ON/OFF and Auto OFF
ON :
Turn the glasses ON with just a short press of the ON/OFF
button. When switched ON, the lenses will alternately
ash one time (left and right) to indicate to the user that
the glasses are powered ON.
OFF :
Turning the glasses OFF is possible by holding down the
ON/OFF the button.
The glasses will turn off automatically in the following
cases:
- Loss of IR/RF synchronization after 10 minutes.
3.2 General setup
- Choose a compatible source: IR, DLP-LinkTM or VESA
- Depending on the type of synchronization used,
connect the ActivHubTM RF as follows :
The ActivHubTM can transmit RF synchronization when
receiving an IR 3D signal.
3D Content
Movie, sports...
RF glasses
ActivHUB
10 11
4.2 Switch button
EDGETM RF has a switch button with 3 positions (all in 3D
mode by default)
4.3 Battery
The EDGETM RF battery life is about 75H
4.3.1 Battery Level
When starting up the glasses and with a short press of
the button, the glasses will show the level of battery life
by the number of ashes of the LED:
- Low level (less than 30%): one ash
- Intermediate level (between 30% and 90%): two ashes
- High level (greater than 90%): three ashes
4.3.2 Battery Charge
The battery charging will be indicated by the LED when
the USB cable is connected:
- Steady light: charging.
- Off: charging is complete.
It is also possible to see the exact level of your glasses’
battery charge by connecting to your computer and
using the Volfoni Loader (see section Advanced settings
via Volfoni Loader).
Once the glasses are recognized,the level bar is
displayed.
5. SOFTWARE UPDATES
Before using the EDGETM RF glasses, make sure you
have the latest version of software from our website. For
this purpose, please download the « Volfoni Loader »
software (http://www.volfoni.com/en/services-support/
download) and connect your glasses to your computer.
Then start the software and follow the instructions below.
- choose the menu “SUPPORT”
- choose “Upgradable Software”
- download the application “VOLFONI LOADER”
- connect your computer to the μUSB connector on the
arm of the EDGETM RF with the USB/μUSB cable
- press and hold the ON/OFF button of the EDGETM RF
during 3 seconds.
- the LED of the EDGETM RF will light red
- verify that the application recognizes your system
- once you are connected, press the button “Check for
updates”
- download the lastest version
12 13
You must be in “Bootloader Mode” so that the
EDGE™ RF is recognized by the software.
To do this, once the USB/μUSB cable is connected to
the computer, press and hold the ON/OFF button for
3 seconds.
Switch Pos (A, B or C) :
- 3D on all positions : In this conguration the glasses
will receive a normal 3D sync whatever the switch
position
- 3D Reverse : In this conguration the glasses will
receive a reverse 3D sync whatever the switch
position
- Shared screen : In this conguration
Switch in A position : 3D
Switch in B position : 2D left
Switch in C position : 2D right
Dark Time :
Allows you to change the value of DarkTime
The slider allows you to adjust the value between -4000
microseconds (better luminosity) and 4000 microseconds
(better contrast). The value applied is inscribed above
the slider (0 in this example)
Moves Detection :
Enables or disables the Auto OFF feature when glasses
are not moving
Enabled: The glasses turn OFF automatically if no
movement is detected after 5 minutes (AUTO OFF
enabled).
Disabled: The glasses will stay on even if no motion is
detected. (AUTO OFF function disabled).
Advanced :
Delta Sync (μs) : Modify the sync offset (between -2000
and 2000 microseconds). Default = 0
6. VOLFONI LOADER - PARAMETERS
You can access to this part by clicking on “parameter”
in the menu “edit”
14 15
8. IMPORTANT SAFETY
RECOMMENDATIONS
-If you are unsure about your vision, take a test to verify
your ability to see stereoscopic 3D images.
-Do not sit too close to the screen when watching 3D
images.
-Watching 3D may cause discomfort (such as eye
strain, altered vision, fatigue, nausea, lightheadedness,
dizziness, confusion, loss of awareness, convulsions,
cramps and/or disorientation) for some people.
Volfoni recommends that you take regular breaks when
watching 3D content or playing 3D video games until
the discomfort ends. If the discomfort persists, consult a
doctor.
-Certain types of TV images or video games that contain
ashing patterns of light may cause epilepsy symptoms
for some viewers. If you or any member of your family
has a history of epilepsy, Volfoni strongly recommends
that you consult a physician before the use of this
product.
-Be aware of young children, especially those under six
years old. Because their vision is still under development,
consult a doctor (such as a pediatrician or eye doctor)
before allowing young children to watch 3D. Not for
children’s use without proper adult supervision.
-If the product is broken, please keep broken pieces
away from mouth and eyes. Dispose of pieces
responsibly.
-Protect the 3D system from direct sunlight, heat, or
7. TROUBLESHOOTING
PROBLEM SOLUTION
The RF signal is not
recognized.
Check that your ActivHubTM
is emitting RF. The blue LED
on the side of the ActivHubTM
RF will ash 2 times quickly to
indicate that it is emitting RF.
The glasses are blinking
strongly.
Check that there is no other
source using the same RF
channel within a range
of 30 meters around the
ActivHubTM RF.
The glasses blink when
I turn them ON
When this phenomenon
occurs, it means that
the battery is low. Please
recharge the glasses.
The EDGE™ RF glasses
are not synchronizing
with the ActivHubTM
RF50
Verify that the RF channel
selected under the
ActivHubTM RF is set to
position “8”. Check that
your original source is
broadcasting 3D.
The EDGE™ RF glasses
stay OFF despite the
fact that I press the
ON/OFF button to turn
them ON
Try recharging your glasses.
If the problem persists,
contact support@volfoni.
com
16 17
9. WARRANTY
Volfoni Group reserves the right to make changes in
the hardware, packaging or other documentation
without prior written notice. The EDGETM RF glasses are
a trademark of Volfoni Group. All trademarks are the
property of their respective companies.
The EDGE™ RF are warrantied. Please refer to your order
form to be aware of the warrantee terms.
The system should be returned in it original box with
original proof of purchase. Volfoni does not warrant
uninterrupted or error-free operation of the product.
water. Extreme conditions may alter the product’s
abilities.
-Do not drop or modify the electrical or mechanical
components of the 3D system.
-Do not apply force to the product.
-Do not leave the ActivHubTM turned ON due to Radio-
Frequency.
10. REGULATIONS
European Union - Disposal information :
This symbol means that according to local laws
and regulations your product should be disposed of
separately from household waste. When this product
reaches the end of its life, take it to a collection point
designated by local authorities. Some collection points
accept products for free. The separate collection and
recycling of your product at the time of disposal will
help conserve natural resources and ensure that it is
recycled in a manner that protects human health and
the environment.
- This Class B digital apparatus complies with Canadian
ICES-003.
18 19
11. MORE INFORMATION AND
CONTACTS
For more information, please contact Volfoni.
www.volfoni.com
Distributed in France by VOLFONI SAS
29 rue Jean Jacques Rousseau 75001 Paris,
France
Distributed in Americas by VOLFONI Inc.
3450, Cahuenga Bd West, Unit 504, Los Angeles,
CA90068, USA
Distributed in Germany by VOLFONI GmbH
Erzgießereistraße 38, 80335 München, GERMANY
Distributed in Spain by VOLFONI Iberia, S.L.
4, Ronda Guglielmo Marconi, 46980 Paterna
(Valencia), Spain
Distributed in China by VOLFONI Ltd
2101, Tower One, Lippo Center, 89, Queensway,
Hong Kong
1. VUE D’ENSEMBLE DU PRODUIT 20.
1.1 DESCRIPTION 20.
1.2 INSTALLATION DES BRANCHES 21.
1.3 COMPOSITION DE LA BOÎTE 22.
2. CARACTÉRISTIQUES DE LA EDGETM RF 22.
2.1 SPÉCIFICATIONS GÉNÉRALES 22.
2.2 SPÉCIFICATIONS TECHNIQUES 22.
3. EXIGENCES 23.
3.1 VUE D’ENSEMBLE DE L’ACTIVHUBTM RF50 23.
3.2 SYNCHRONISATION PAR RADIO-FRÉQUENCES 23.
4. UTILISATION DE VOS LUNETTES 3D EDGETM RF 25.
4.1 ON/OFF ET AUTO OFF 25.
4.2 BOUTON À 3 POSITIONS 25.
4.2 BATTERIE 26.
4.3.1 NIVEAU DE BATTERIE 26.
4.3.1 CHARGER LA BATTERIE 26.
5. MISES À JOUR DU LOGICIEL 27.
6. PARAMÈTRES DU VOLFONI LOADER 28.
7. RÉSOLUTION DES PROBLÈMES 30.
8. RECOMMANDATIONS DE SÉCURITÉ 31.
9. GARANTIE 33.
10. NORMES REGLEMENTAIRES 33.
11. PLUS D’INFORMATIONS ET CONTACTS 34.
SOMMAIRE
Indice
Lingue:
Altri manuali Volfoni Occhiali 3D
Volfoni
Volfoni VPEG-05010 Manuale utente
Volfoni
Volfoni VPEG-05010 Manuale utente
Volfoni
Volfoni EDGE VR VPEG-05010 Manuale utente
Volfoni
Volfoni VBAE-01000 Manuale utente
Volfoni
Volfoni Boge universal VPEG-04010 Manuale utente
Volfoni
Volfoni EDGE RF Manuale utente
Volfoni
Volfoni ActivHub IR100 Manuale utente
Volfoni
Volfoni ActivHub IR50 Manuale utente
Volfoni
Volfoni VBAE-01000 Manuale utente
Volfoni
Volfoni edge 1.1 stn series Manuale utente
