Volt VPL-1002 Series Manuale utente
VOLT®Low Voltage Landscape Lighting
Elegant Harp LED Path/Area Light
INSTALLATION INSTRUCTIONS
Specications and product details subject to change without notice.
© Copyright 2016, VOLT® Lighting, Lutz FL USA 33549 • All rights reserved.
[email protected] • 813.978.3700
Help Hotline:
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)
VOLT®Elegant Harp LED Path/Area Light
VPL-1002 Series
Important: Please Read Before Installation
INSTALLATION INSTRUCTIONS
This luminaire is intended for installation in accordance with local codes
and the National Electric Code (NEC). Failure to adhere to these codes and
instructions may result in serious injury, property damage and void the
warranty.
These instructions do not intend to cover all variations in installation,
operation maintenance or mounting situation.
1. Make sure that the power is turned OFF before installing or servicing this
luminaire.
2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) or
more from pool, spa or fountain.
3. This luminaire is intended to be used only with a power supply
(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.
4. Wiring connections must be made with wire connectors that is suitable for
outdoor use.
5. Position the low voltage wire and wire connector so that it is located
within 6 inches (15.2 cm) from a building structure, a luminaire or tting.
6. The main low voltage cable is intended for shallow burial - less than 6
inches (152 mm)
7. If additional lengths of low voltage cable is required, please contact www.
voltlighting.com or call 1-813-978-3700.
!
www.voltlighting.com
IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
Lighted lamp is HOT!
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.
1. Turn off/unplug and allow to cool before replacing lamp.
2. Lamp gets HOT quickly! Contact only switch/plug when turning on.
3. Do not touch the hot lens, guard or enclosure.
4. Keep lamp away from materials that may burn.
5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may
damage lamp.
6. Do not operate the luminaire tting with a missing or damage shield.
SAVE THESE INSTRUCTIONS
!
Package Contents
Product Dimensions
A. (1) Luminaire
B. (1) Stake
customersupport@voltlighting.com • 813.978.3700
10” 8”
2”
26”
Parts Required
A. (1) Lamp (Sold Separately)
Install Stake
1
Determine desired location for mounting
luminaire. Hammer stake into ground until
ange of stake is ush to grade. To avoid
damage to stake, place a board on top of
stake while hammering.
NOTE: If ground is hard and stake is
difcult to install, make a crosscut in
ground using a at shovel.
Board
Stake
Soil
Ground
INSTALLATION INSTRUCTIONS
www.voltlighting.com
VOLT®Elegant Harp LED Path/Area Light
VPL-1002 Series
Install Luminaire to Stake
2
Clear away area in ground at wireway
slot in top of stake. Align the wireway
slots on base and stake. Lay luminaire
pigtail into wireway slots and thread
the nipple at the bottom end of the
luminaire body into stake. Tighten
until snug to secure base.
Wire Connection
3
Luminaire
Stake
Pigtail
Wireway Slot
Strip two leads from luminaire pigtail. Using two wire connectors (not
provided), connect leads from luminaire to main low voltage supply
cable leads.
Pigtail
Main Low
Voltage Supply
Cable
Wire Connectors
Remove Diffuser
Install Lamp
Install Diffuser
4
5
6
Remove screws from diffuser to
expose the socket.
Insert lamp with correct wattage
and type marked on luminaire
label.
CAUTION: Do not exceed maximum
wattage marked on luminaire label.
NOTE: DO NOT touch lamp with
bare hands. Use soft cloth to
handle lamp.
Align screw holes on diffuser with
those on the shade. Tighten screws
to re-attach diffuser to shade.
customersupport@voltlighting.com • 813.978.3700
Shade
Socket
Shade
Diffuser
Screw
Lamp
Diffuser
Screw
Install/Replace Lamp
Please reverse Step 6 - Step 5 to expose the lamp and replace it with
correct wattage and type marked on luminaire label. Reinstall Diffuser.
IMPORTANT: Lamp must be protected from moisture and dust at all times.
Always re-install diffuser when moved.
is-VPL-1002-ver1.pdf
Specications and product details subject to change without notice.
© Copyright 2016, VOLT® Lighting, Lutz FL USA 33549 • All rights reserved.
[email protected] • 813.978.3700
www.voltlighting.com
Help Hotline:
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)
Indice
Altri manuali Volt Illuminazione del paesaggio
Volt
Volt VFL-40 MS-ABZ Series Manuale utente
Volt
Volt VHS-605-4-FPG Manuale utente
Volt
Volt VSDL-6013-BBZ Manuale utente
Volt
Volt VFL-4602-BBZ Manuale utente
Volt
Volt VPL- 398 Manuale utente
Volt
Volt VHS-6720-X-BBZ Manuale utente
Volt
Volt VFL-4007-4-BBZ Manuale utente
Volt
Volt VAL-2015-BBZ Manuale utente
Volt
Volt VHS-6719-BBZ Manuale utente
Volt
Volt VDL-6000 Manuale utente
Volt
Volt VDL-6008-4-BBZ Manuale utente
Volt
Volt VAL-2002 Manuale utente
Volt
Volt VAL-2043-LI-ABK Manuale utente
Volt
Volt VSPL-1045-BBZ-R1 Manuale utente
Volt
Volt VFL-430-4-BBK Manuale utente
Volt
Volt VFL-4601-4-BBZ Manuale utente
Volt
Volt LPL-PLKIT Manuale utente
Volt
Volt VSPL-1047-BBZ Manuale utente
Volt
Volt VHS-650-4-BBK Manuale utente
Volt
Volt VPL-1024 Manuale utente
Manuali Illuminazione del paesaggio popolari di altre marche
Cooper Lighting
Cooper Lighting MCGRAW-EDISON WBG Manuale utente
Cooper Lighting
Cooper Lighting Invue 42 - 175W Manuale utente
Saxby Lighting
Saxby Lighting Islay 68784 Manuale
LIGMAN
LIGMAN EU-10016-3 Manuale utente
Cooper Lighting
Cooper Lighting McGraw-Edison ZD Credenza Manuale utente
LIGMAN
LIGMAN KI-60475 Manuale utente
