Volvo SENSUS Manuale utente

SENSUS NAVIGATION

Text and symbols on the map

Arrival time/remaining travel time

Distance to destination

Compass/changes between north and travel direction up

Starting

Destination/final destination

Changes map display between 2D and 3D

Resets the map to follow the car

Point of interest (POI - 1)

Traffic information

Minimises (expanded view) or maximises the map image (full screen)

Car on planned route

Minimises the toolbar

Repeats current voice guidance

Minimises the toolbar

Calculates detour

Voice guidance temporarily On/Off

Shows a list of the itinerary's guidance points

Enter destination/intermediate destination

Cancels guidance

Shows a list of the itinerary's points of interest (POI2) and traffic infor-

mation

Next manoeuvre

Itinerary and alternative route

Destination/final destination

1Point of Interest

2Point of Interest

SENSUS NAVIGATION

Sensus Navigation is a satellite based traffic information and route guid-

ance system.

Development work is constantly in progress to improve our product.

Modifications may mean that information, descriptions and illustrations in

this supplement differ from the equipment in the car. We reserve the

right to make modifications without prior notice.

2
INTRODUCTION
Quick guide to map navigation 6
Displays and operating controls for
map navigation 7
Common operations during map nav-
igation 8
VOICE RECOGNITION
Voice recognition 12
Using voice recognition 12
Voice recognition and map navigation 13
Settings for voice recognition 14
SPECIFY A DESTINATION
General information about entering a
destination 18
Enter destination directly on the map 18
Specify destination with free text
searching 19
Specifying a destination with Latest/
Favourites/Library 20
Specify destination with point of interest 21
Specifying a destination with an address 21
Save the destination with Send to Car 22
TABLE OF CONTENTS

3
ITINERARY AND ROUTE
Itinerary and Alternative route 24
Guidance points in the Itinerary 25
Points of interest along the route 25
Traffic disruptions along the route 26
Information cards on the map 26
Select detour 26
TRAFFIC INFORMATION
Traffic information 30
Real Time Traffic Information 30
SETTINGS
Activating/deactivating map display
in the driver display 34
Sensus Navigation settings 34
Map settings 34
Settings for route and road navigation 35
Traffic settings 36
Activating/deactivating Real Time
Traffic Information 37

MAP AND SYSTEM INFORMATION

Updating map data with MapCare 40

Updating map data with Internet-

connected car 41

Updating map data via PC and USB 42

Fault tracing for Sensus Navigation 44

License agreement for map navigation 45

ALPHABETICAL INDEX

Alphabetical Index 49

INTRODUCTION

Quick guide to map navigation

The navigation system is activated automatically

when the driver's door is opened.

Activating navigation

Subview for navigation

Home button

If the navigation system does not show a map on

the centre display - tap on the uppermost sub-

view Navigation (1).

If the centre display does not show the subview

Navigation - press the home button (2) and

then on the subview Navigation (1).

Then a map of the current area is shown with the

car symbolised by a blue triangle.

Press on this symbol to show

the map image across the

entire centre display.

WARNING

Observe the following.

•Direct all your attention to the road and

make sure that all your concentration is

on driving.

•Follow applicable traffic legislation and

drive with good judgment.

•Due to weather conditions or time of year

affecting the road conditions, some rec-

ommendations may be less reliable.

Deactivating navigation

The navigation system cannot be switched off but

always works in the background - it is only

switched off when the driver locks and leaves the

car.

NOTE

The navigation system is also available when

the engine is switched off. When the battery

level gets too low the system switches off.

Related information

•Displays and operating controls for map navi-

gation (p. 7)

INTRODUCTION

}}

Displays and operating controls for

map navigation

Sensus Navigation is presented and operated in

several different ways, e.g. via the driver display,

head-up display and voice commands.

Centre display

All navigation system settings are made via the

centre display. The driver sets the appearance of

the map and specifies destinations here.

If the map image is not shown in the centre dis-

play - tap on the home view's top subview

Navigation.

The driver display

The map is only shown in the 12" driver display.

During driving the driver is guided by voice guid-

ance and instructions on the driver display. Map

display in the driver display can also be active

without a set destination.

The right-hand steering wheel keypad

and the driver display

The right-hand steering wheel buttons can be

used to manage some of the map navigation

functions, e.g. Take me home and Cancel

guidance. If a message is shown the driver dis-

play, it must first be acknowledged for the menu

to be shown.

Opening/closing the menu. The menu is

closed automatically after a period of inactiv-

ity or with certain options.

Browsing between menus.

Browsing between menu options.

Confirm or highlight an option.

||
INTRODUCTION
* Option/accessory.
8
Head-up display*
Map navigation on the windscreen.
The driver can also receive guidance and infor-
mation from the navigation system in the head-up
display on the bottom of the windscreen.
Display of navigation information can be switched
off and the position of the information field can
be adjusted.
Voice recognition
Many functions can also be controlled with voice
commands.
Press the steering wheel but-
ton, wait for the signal, then
say, for example, “Drive Home”.
Related information
•Specify destination with free text searching
(p. 19)
•Voice recognition and map navigation
(p. 13)
•Voice recognition (p. 12)
•Using voice recognition (p. 12)
•Settings for voice recognition (p. 14)
•Activating/deactivating map display in the
driver display (p. 34)
Common operations during map
navigation
Some common operations during map naviga-
tion are described below.
•Where am I?
•Find the car symbol on the map
•Driving direction or north up on the map
•2D or 3D display
•Zoom in
•Zoom out
•Scroll
•Switching heading display
•Finding the way back to the map view
Where am I?
What geographic position does the car have
now?
•Press the map's car symbol (blue triangle) -
the information is shown directly on the map.
Find the car symbol on the map
After zooming in and out and moving
around on the map, it can sometimes
be hard to find your way back to the
position of the car. Press the crosshairs
to reset the map to follow the car symbol.